IWATSU VIỆT NAM, Đại lý Iwatsu tại Việt Nam

cuahangtudonghoa — 2019-04-12 16:45:08

Công Ty TNHH TM và DV Tăng Minh Phát Là nhà phân phối chính hãng IWATSU tại Việt Nam

Đại lý Iwatsu tại Việt Nam

Products

	Semiconductor Curve Tracer
	B-H Analyzers
	Isolation System
	Oscilloscopes
	Isolation Probe
	Probe General Information
	Delay Pattern Generator (six-channel pulse generator)
	Digital Multimeters
	Signal Generators
	Universal Counters

CS-3100 IWATSU VIỆT NAM

CS-3200 IWATSU VIỆT NAM

CS-3300 IWATSU VIỆT NAM

CS-5100 IWATSU VIỆT NAM

CS-5200 IWATSU VIỆT NAM

CS-5300 IWATSU VIỆT NAM

CS-5400 IWATSU VIỆT NAM

CS-10400 IWATSU VIỆT NAM

CS-10800 IWATSU VIỆT NAM

DS-5654 IWATSU VIỆT NAM

DS-5652 IWATSU VIỆT NAM

DS-5634 IWATSU VIỆT NAM

DS-5632 IWATSU VIỆT NAM

DS-5624 IWATSU VIỆT NAM

DS-5622 IWATSU VIỆT NAM

DS-5614 IWATSU VIỆT NAM

DS-5612 IWATSU VIỆT NAM

CS-12800 IWATSU VIỆT NAM

CS-15800 IWATSU VIỆT NAM

SY-960 IWATSU VIỆT NAM

SY-961 IWATSU VIỆT NAM

SY-962 IWATSU VIỆT NAM

HSA4101-IW IWATSU VIỆT NAM

HSA4014-IW IWATSU VIỆT NAM

IE-1125B IWATSU VIỆT NAM

SY-911 IWATSU VIỆT NAM

SY-931 IWATSU VIỆT NAM

SY-320A IWATSU VIỆT NAM

SY-321A IWATSU VIỆT NAM

SY-510 IWATSU VIỆT NAM

SY-511 IWATSU VIỆT NAM

SY-512 IWATSU VIỆT NAM

SY-910 IWATSU VIỆT NAM

SY-956 IWATSU VIỆT NAM

SY-509 IWATSU VIỆT NAM

DM-610A IWATSU VIỆT NAM

DM-600A IWATSU VIỆT NAM

DM-900A IWATSU VIỆT NAM

DM-900AL IWATSU VIỆT NAM

DM-910A IWATSU VIỆT NAM

DM-910AL IWATSU VIỆT NAM

DM-002 IWATSU VIỆT NAM

DM-004 IWATSU VIỆT NAM

DM-005 IWATSU VIỆT NAM

DM-006 IWATSU VIỆT NAM

DM-007 IWATSU VIỆT NAM

DM-008 IWATSU VIỆT NAM

DM-009 IWATSU VIỆT NAM

DM-010 IWATSU VIỆT NAM

DM-105 IWATSU VIỆT NAM

DM-106 IWATSU VIỆT NAM

DS-5554A IWATSU VIỆT NAM

DS-5552A IWATSU VIỆT NAM

DS-5534A IWATSU VIỆT NAM

DS-5532A IWATSU VIỆT NAM

DS-5524A IWATSU VIỆT NAM

DS-5522A IWATSU VIỆT NAM

DS-5514A IWATSU VIỆT NAM

DS-5512A IWATSU VIỆT NAM

SE-6000 IWATSU VIỆT NAM

SE-6011 IWATSU VIỆT NAM

DG-801 IWATSU VIỆT NAM

DG-802 IWATSU VIỆT NAM

DG-601 IWATSU VIỆT NAM

DG-602 IWATSU VIỆT NAM

VOAC7602 IWATSU VIỆT NAM

VOAC7523H IWATSU VIỆT NAM

VOAC7522H IWATSU VIỆT NAM

VOAC7521H IWATSU VIỆT NAM

VOAC7520H IWATSU VIỆT NAM

SG-4322 IWATSU VIỆT NAM

SG-4321 IWATSU VIỆT NAM

SG-4105 IWATSU VIỆT NAM

SG-4104 IWATSU VIỆT NAM

SC-7217A IWATSU VIỆT NAM

SC-7215A IWATSU VIỆT NAM

SC-7205 IWATSU VIỆT NAM

SS-0120 IWATSU VIỆT NAM

SS-0121 IWATSU VIỆT NAM

SS-0122 IWATSU VIỆT NAM

SS-0112 IWATSU VIỆT NAM

SS-0004 IWATSU VIỆT NAM

SS-101R IWATSU VIỆT NAM

SS-103R IWATSU VIỆT NAM

SS-0120 IWATSU VIỆT NAM

SS-0121 IWATSU VIỆT NAM

SS-0122 IWATSU VIỆT NAM

SS-0112 IWATSU VIỆT NAM

SS-0130R IWATSU VIỆT NAM

SS-0131R IWATSU VIỆT NAM

PHT312-RO IWATSU VIỆT NAM

SS-0170R IWATSU VIỆT NAM

SS-0171R IWATSU VIỆT NAM

PHV1000-RO IWATSU VIỆT NAM

PHV1000-3-RO IWATSU VIỆT NAM

PHV641-LRO IWATSU VIỆT NAM

PHV642-LRO IWATSU VIỆT NAM

PHV643-LRO IWATSU VIỆT NAM

PHV661-LRO IWATSU VIỆT NAM

PHV662-LRO IWATSU VIỆT NAM

PHV663-LRO IWATSU VIỆT NAM

SS-0120 IWATSU VIỆT NAM

SS-0121 IWATSU VIỆT NAM

SS-0122 IWATSU VIỆT NAM

SS-0112 IWATSU VIỆT NAM

SS-0004 IWATSU VIỆT NAM

SS-0131R IWATSU VIỆT NAM

HV-P30A IWATSU VIỆT NAM

HV-P60A IWATSU VIỆT NAM

PHV4002-10-RO IWATSU VIỆT NAM

PHV4002-3-RO IWATSU VIỆT NAM

SS-103R IWATSU VIỆT NAM

SS-0130R IWATSU VIỆT NAM

PHV643-LRO IWATSU VIỆT NAM

PHV663-LRO IWATSU VIỆT NAM

PHVS667-LRO IWATSU VIỆT NAM

PHV1000-RO IWATSU VIỆT NAM

PHV1000-3-RO IWATSU VIỆT NAM

PHV641-LRO IWATSU VIỆT NAM

PHV642-LRO IWATSU VIỆT NAM

PHV661-LRO IWATSU VIỆT NAM

PHV662-LRO IWATSU VIỆT NAM

PHVS1000-3-RO IWATSU VIỆT NAM

PHVS663-LRO IWATSU VIỆT NAM

PHT312-RO IWATSU VIỆT NAM

SS-0170R IWATSU VIỆT NAM

SS-0171R IWATSU VIỆT NAM

PHVS1000-RO IWATSU VIỆT NAM

PHVS662-LRO IWATSU VIỆT NAM

SS-101R IWATSU VIỆT NAM

SS-293L IWATSU VIỆT NAM

SS-293S IWATSU VIỆT NAM

SS-294L IWATSU VIỆT NAM

SS-294S IWATSU VIỆT NAM

SS-295L IWATSU VIỆT NAM

SS-295S IWATSU VIỆT NAM

SS-296L IWATSU VIỆT NAM

SS-296S IWATSU VIỆT NAM

SS-525M IWATSU VIỆT NAM

SS-625S IWATSU VỆT NAM

SS-281A IWATSU VỆT NAM

SS-282A IWATSU VỆT NAM

SS-283A IWATSU VỆT NAM

SS-284A IWATSU VỆT NAM

SS-285A IWATSU VỆT NAM

SS-293L IWATSU VỆT NAM

SS-293S IWATSU VỆT NAM

SS-294L IWATSU VỆT NAM

SS-294S IWATSU VỆT NAM

SS-626M IWATSU VỆT NAM

SS-626S IWATSU VỆT NAM

SS-627M IWATSU VỆT NAM

SS-627S IWATSU VỆT NAM

SS-295M IWATSU VỆT NAM

SS-295S IWATSU VỆT NAM

SS-296M IWATSU VỆT NAM

SS-296S IWATSU VỆT NAM

SS-628M IWATSU VỆT NAM

SS-628S IWATSU VỆT NAM

SS-629M IWATSU VỆT NAM

SS-629S IWATSU VỆT NAM

SS-288A IWATSU VỆT NAM

SS289A IWATSU VỆT NAM

PDD2011 IWATSU VỆT NAM

PDD 2012 IWATSU VỆT NAM

PDD 2013 IWATSU VỆT NAM

PDD 4011A IWATSU VỆT NAM

PDD 4012A IWATSU VỆT NAM

PDD 4002-3 IWATSU VỆT NAM

PDD 4161-L IWATSU VỆT NAM

PDD 4162-L IWATSU VỆT NAM

PDD 4163-L IWATSU VỆT NAM

PDDS 4962-L IWATSU VỆT NAM

PDDS 4963-L IWATSU VỆT NAM

KHT1000C IWATSU VỆT NAM

KHT6000C IWATSU VỆT NAM

TK100C IWATSU VỆT NAM

KSZ10 IWATSU VỆT NAM

KSZ100C IWATSU VỆT NAM

The post IWATSU VIỆT NAM, Đại lý Iwatsu tại Việt Nam appeared first on cuahangtudonghoa.com.

Universal Counters, IWATSU VIỆT NAM

cuahangtudonghoa — 2019-04-12 16:32:26

Công Ty TNHH TM và DV Tăng Minh Phát Là nhà phân phối chính hãng IWATSU tại Việt Nam

	Range	Measurement item
SC-7217A	DC-3GHz,1ch DC-450MHz,2ch	Frequency, Frequency ratio, Time interval, Period, Pulse width, Duty cycle, Phase, Totalize, Peak voltage
SC-7215A	DC-450MHz,2ch	Frequency, Frequency ratio, Time interval, Period, Pulse width, Duty cycle, Phase, Totalize, Peak voltage
SC-7205A	DC-230MHz,2ch	Frequency, Frequency ratio, Time interval, Period, Pulse width, Duty cycle, Phase, Totalize, Peak voltage

Range

Measurement item

SC-7217A

DC-3GHz,1ch
DC-450MHz,2ch

Frequency, Frequency ratio, Time interval, Period, Pulse width,

Duty cycle, Phase, Totalize, Peak voltage

SC-7215A

DC-450MHz,2ch

Frequency, Frequency ratio, Time interval, Period, Pulse width,

Duty cycle, Phase, Totalize, Peak voltage

SC-7205A

DC-230MHz,2ch

Frequency, Frequency ratio, Time interval, Period, Pulse width,

Duty cycle, Phase, Totalize, Peak voltage

BỘ ĐẾM SC-7217A IWATSU VIỆT NAM

BỘ ĐẾM SC-7215A IWATSU VIỆT NAM

BỘ ĐẾM SC-7205 IWATSU VIỆT NAM

Universal Counters SC-7217A / SC-7215A

				SC-7217A	SC-7215A
CH-A、CH-B	Input impedance			50ohm ±1.5% / 1Mohm ± 1.5% //16pF ±3pF
	Input withstand pressure	50ohm / 1Mohm		7Vrms / 200Vpk
	Frequency band	DC / AC		DC to 450MHz / 10Hz to 450MHz
	Input voltage range	ATT OFF / ON		±2.5V / ±50V
	Trigger level accuracy	ATT OFF / ON		±2%±25mV / ±2.5%±500mV
	Slope switching			＋/－
	Band limitter			10kHz
	Noise rejection			OFF / ON
EXT-B	Input signal range	Pulse width / frequency		500ns min / 1MHz　max
CH-C	Input impedance / SWR / Maximum input electrical power			50ohm, AC coupling / 2.0 or less / +30dBm	-
	Frequency band			100MHz to 3GHz	-
	AGC			OFF / ON	-
	Burst detection			OFF / ON	-
		Detection sensitivity		Up until 1.2GHz: -20dBm, up until 3GHz: -10dBm	-
		Burst detection delay time		10us	-
Measurement Functions	FREQ A、FREQ B			Max. 13-digit, 12-digit/sec (at 1second gate)
		Measurement range		Single: 6mHz to 250MHz, time / EXT-B gate: 12mHz to 450MHz
		Gate selection		Single / EXT-B / Time (set at 10μs to 10s 10^n) (n: integer)
	FREQ C			Max. 13-digit 12-digit/sec (at 1second gate)	-
		Measurement range		100MHz to 3GHz, 1/16 pre-scaler	-
		Gate selection		EXT-B / Time (set at 10μs to 10s 10^n) (n: integer)	-
	FREQ LINE	Measurement range / Gate selection		45Hz to 440Hz / 0.1s/1s/10s
	PERIOD　A	Measurement range		Single: 4ns to 166s
				Time / EXT-B gate: 2.2ns to 83s
		Gate selection		Single / EXT-B / Time (set at 10μs to 10s 10^n) (n: integer)
	DUTY A	Input signal range	Pulse width / Frequency	6ns min / 80MHz max
		Measurement range	Single / Time	0.01μ to 99.999,999,99% / 0.2μ to 99.999,999,8%
		Gate selection		Single / Time (set at 10μs to 10s 10^n) (n: integer)
	PULSE WIDTH A	Input signal range	Pulse width / Frequency	6ns min / 80MHz max
		Measurement range	Single / Time	6ns to 171s / 6ns to approximately 1/2 gate time
		Gate selection		Single / Time (set at 10μs to 10s 10^n) (n: integer)
	TIME INTERVAL A→B	Input signal range	Pulse width / Frequency	6ns min / 80MHz max
		Measurement range	Single / Time	6ns to 10,995s / 6ns to approximately 1/2 gate time
		Gate selection		Single / Time (set at 10μs to 10s 10^n) (n: integer)
	FREQ　A/B	Input signal range, Frequency		250MHz max
		Measurement range / Gate Selection		1 E-9 to 1 E+9 / Time (set at 10μs to 10s 10^n) (n: integer)
	PHAS A->B	Input signal range	Pulse width / Frequency	6ns min / 80MHz max
		Measurement range	Single / Time	0.1μ to 359.999,999,9°/ 1μ to 359.999,999° (It is necessary or this to be less than half of the gate for nonmeasurable signal cycles)
		Gate selection		Single / Time (set at 10μs to 10s 10^n) (n: integer)
	TOT A	Input signal range	Pulse width / Frequency	2ns min / 250MHz max
		Gate selection		MANUAL / EXT-B / Time (set at 10μs to 10s 10^n) (n: integer)
	Peak voltage measurement	Measurement frequency / Measurement speed		150Hz to 150MHz / 2 seconds or less
		Measurement voltage range	ATT OFF / ATT ON	±2.5V / ±50V
Measurement operations				Repeat / Single / HOLD
Calculation				Smoothing (moving average), scaling, comparate, statistics (MAX, MIN, σ, average)
Pulse setup				Internal memory (10) or USB memory
DATA save memory				MAX. 500,000kinds (volatile memory)
Internal standard clock		Temperature characteristics		±1ppm (range of 0 to +40deg. with +25deg. as the standard)
		Temporal change / Short-term stability		±0.1ppm/month、±1ppm/year / ±1ppb/s
Interface		USB ／ LAN／DIO		USB2.0 HS / 100base-TX / Output: HI/LO/GO/BUSY
10MHz STD IN		Input impedance / Input frequency / Input sensitivity		Approximately 850 ohms (at 10MHz), AC coupling / 10MHz ±50Hz / 100mVrms
Marker / STD output				STD / Marker selected and output with the setting
		Output impedance / Marker output / STD output		50ohms ±10% / +1Vo-p (0V output during measurement) / 10MHz sine wave 1Vp-p or more (with 50ohm termination)
Options (Factory installed)	OCXO	SC-715 (High stability)	Temperature characteristics	±20ppb (range of 0deg. to +40deg. adjusted at +25deg. as the standard)
			Temporal change	±10ppb/day (fluctuations in one day's frequencies with the standard frequency being that measured after 48 hours. at +25deg.)
				±100ppb/year (fluctuations in one year's frequencies with the standard frequency being that measured within 10days after the power has been switched on. at +25deg.)
		SC-716 (Ultra-high stability)	Temperature characteristics	±5ppb (range of 0deg. to +40deg. adjusted at +25deg. as the standard)
			Temporal change	±0.5ppb/day (fluctuations in one day's frequencies with the standard frequency being that measured within 30 days after powered on. at +25deg.)
				±50ppb/year (fluctuations in one year's frequencies with the standard frequency being that measured within 30 days after powered on. at +25deg.)
	Interface			SC-711: GPIB Interface (compatible to IEEE488-1 with full remote functions / factory installed) SC-714: RS-232 Interface (factory installed) SC-713: USB Interface to USB memory (for storage only)
Electric power	Voltage / Frequency			AC100V to AC240V ±10% / 50 to 60Hz±5% AC100V to AC120V ±10% / 400Hz±:10%
	Power consumption			70VA(35W) max
Rear panel inputs (optional, factory installed)				SC-709: CH-A/CH-B input (for SC-7215A) SC-710: CH-A/CH-B/CH-C input (for SC-7217A)
External dimensions				210W×99H×353D (mm)
Accessories				Product users’guide x 1, instructions (CD) x 1, power cable x 1.
Environment				0deg. to +40deg. with 80%RH or less and no condensation

The post Universal Counters, IWATSU VIỆT NAM appeared first on cuahangtudonghoa.com.

Signal Generators, IWATSU VIỆT NAM

cuahangtudonghoa — 2019-04-12 16:13:05

Công Ty TNHH TM và DV Tăng Minh Phát Là nhà phân phối chính hãng IWATSU tại Việt Nam

Model		SG-4322 IWATSU	SG-4321 IWATSU	SG-4105 IWATSU	SG-4104 IWATSU
Image
No. of channels		2	1	1	1
Waveform amplitude resolution		14bit		12bit
Frequency setting range	Sine	0.01μHz - 30MHz		10mHz - 15MHz	10mHz - 5MHz
	Square	0.01μHz - 15MHz		10mHz - 15MHz	10mHz - 5MHz
	Pulse	0.01μHz - 15MHz		10mHz - 100kHz
	Pulse (Duty/Width-variable)	0.01μHz - 15MHz		-
	Trapezoid wave	0.01μHz - 5MHz		10mHz - 100kHz
	Ramp(Symmetry variable)	0.01μHz - 5MHz		10mHz - 100kHz
	Arbitrary waveform	0.01μHz - 5MHz		-
	Noise	BW 26MHz		-
Frequency setting resolution		0.01μHz		10mHz or 5-digit
Rising/falling variable		Pulse：15ns - 58.8Ms		-
Arbitrary waveform data length/ number of waves		512Kwords / 128waveforms, 4Mwords		-
Maximum output voltage/resolution (50Ω output)		(50Ω) 10Vp-p / 50Ω (open) 20Vp-p 0.1mVp-p 4 digits(999.9 mVp-p or lower) 1mVp-p 5 digits (1 Vp-p or higher)		(50Ω) 50mVp-p - 10Vp-p (open) 100mVp-p - 20Vp-p 0.1mV or 3 digits(50.0mV - 10.0V) DC：1mV or 3digits(1mV - 5.00V)
Oscillation Mode	Continuous	yes	yes	yes	yes
	Burst /Trigger Gate /Triggered Gate	yes	yes	Burst Trigger Gate	Trigger Gate
	Sweep	Frequency, Phase, Amplitude, DC Offset, Duty		Frequency	-
	Internal/External Modulation	FM、FSK、PM、PSK、AM、DC Offset、PWM		-
	Sequence	yes		-
	2ch Phase Synchronization	yes	-	-
User-defined Units		yes	yes	-
Synchronous Operation		yes	yes	-
Input/Output Floating		yes	yes	-
During CH1 -CH2 Isolation		yes	-	-
External Addition Input		yes	yes	-
Setting Memory		yes	yes	yes
GPIB Interface		yes	yes	yes	-
USB interface		yes	yes	-
Display		Color LCD		Fluorescent tube display

SG-4322 IWATSU VIỆT NAM

SG-4321 IWATSU VIỆT NAM

SG-4105 IWATSU VIỆT NAM

SG-4104 IWATSU VIỆT NAM

Function Generator SG-4322 / SG-4321Specifications

Model

SG-4322

SG-4321

Oscillation waveform

Sine,Square,Pulse,Ramp,Parameter-variable(25 types),
Noise(Gaussian distribution),DC,Arbitrary

No. of channels

2ch

1ch

Insulation

･	Each signal ground for CH1, CH2 and　external 10MHz frequency reference input is independent.
･	The signal grounds for waveform output, sync/sub output and external modulation/addition input are insulated from the housing. (These signal grounds are common within the same channel.)
･	The signal ground for external 10 MHz frequency reference input is insulated from the housing.

Output impedance

50 unbalanced

Frequency

Various modes

	Mode
	Continuous, modulation, and sweep (continuous/ single-shot)	Sweep (gated Single-shot)and burst	Sequence
Sine	0.01μHz to 30MHz	0.01μHz to 10MHz
Square	0.01μHz to 15MHz	0.01μHz to 10MHz
Pulse	0.01μHz to 15MHz	0.01μHz to 10MHz	－
Ramp	0.01μHz to 5MHz		0.01μHz to 5MHz *2
Parameter- variable	0.01μHz tol 5MHz		0.01μHz to 5MHz *2
Noise	The equivalent bandwidth is fixed to 26 MHz.
DC	Frequency setting invalid
Arbitrary	0.01μHz to 5MHz

Frequency accuracy*1

（3 ppm of setting + 2 pHz）, aging rate*1: 1 ppm/year

Frequency setting resolution

0.01μHz

Amplitude

Setting range

0 Vp-p to 20 Vp-p / open,
0 Vp-p to 10 Vp-p / 50Ω
AC + DC 10 V / open

Accuracy *1

(1% of amplitude setting [Vp-p] + 2 mVp-p) / open

Setting resolution

999.9 mVp-p or less: 4-digit/0.1 mVp-p
1 Vp-p or greater: 5-digit/1 mVp-p

Setting unit

Vp-p、Vpk、Vrms、dBV、dBm

Resolution of waveform amplitude

Approx. 14 bits (36 mVp-p / open or greater)

Oscillation mode

Continuous modulation, sweep, burst, sequence

DC offset

Setting range

10 V/open, 5 V/50Ω

Setting resolution

499.9 mV or less: 4-digit / 0.1 mV, 0.5 V or greater: 5-digit / 1 mV

Accuracy *1

(│1% of DC offset setting [V]│+ 5 mV + 0.5% of
amplitude setting [Vp-p])/open (20C to 30C when
outputting sine waves of 10 MHz or less)

Synchronous /
sub output

Sync signals: TTL level
Internal modulation signal: - 3 V to + 3 V / open
Sweep X drive: 0 V to + 3 V / open

Sine wave

Amplitude
frequency
characteristics *1

～100kHz ：±0.1dB
100kHz ～ 5MHz ：±0.15dB
5MHz ～20MHz ：±0.3dB
20MHz ～ 30MHz ：±0.5dB
（2.8Vp-p以上／ 50Ωでは±0.8dB）
（50mVp-p ～10Vp-p ／ 50Ω、1kHz基準）

Total harmonic distortion *1

10Hz ～20kHz ： 0.2％以下（0.5Vp-p ～10Vp-p ／ 50Ω）

Harmonic spurious *1

	0.5Vp-p to 2Vp-p/50Ω	2Vp-p to 10Vp-p/50Ω
to 1MHz	- 60dBc or less	- 60dBc or less
1MHz to10MHz	- 50dBc or less	- 43dBc or less
10MHz to 30MHz	- 40dBc or less	- 30dBc or less

Non-harmonic
spurious *1

to1MHz	- 60dBc or less	｝
1MHz to 10MHz	- 50dBc or less		（ 0.5Vp-p to 10Vp-p / 50Ω）
10MHz to 30MHz	- 45dBc or less

Square wave

Duty variable

Normal: Setting range: 0.0100% to 99.9900%
Upper limit (%): 100 – frequency (kHz) /300
Lower limit (%): frequency (kHz) /300
Jitter: 300 ps rms or less typ.
Extended: Setting range: 0.0000% to 100.0000%
Jitter: 2.5 ns rms or less typ.

Rising/falling time *1

17ns or less

Overshoot

5％or less typ.

Pulse wave

Pulse width

Duty setting range: 0.0170% to 99.9830%
Time setting range: 25.50 ns to 99.9830 Ms

Rising/falling time

Setting range 15.0 ns to 58.8 Ms (3-digit/0.1 ns)
Rising/falling time independently set
The minimum setting value is 0.01% of period or 15 ns, whichever is larger.

Overshoot

5％or less typ.

Jitter

500 ps rms or less typ. (10 kHz or more)
2.5 ns rms or less typ. (less than 10 kHz)

Ramp wave

Symmetry setting range: 0.00% to 100.00%

Parameter-variable waveforms

(Can change the parameters specific to incorporated waveforms.)

Can change the parameters specific to incorporated waveforms.

Steady sine wave group

Unbalanced sine, clipped sine, CF controlled sine, conduction
angle controlled sine, staircase sine, and multi-cycle sine waves

Transient sine wave group

投On-phase controlled sine, off-phase controlled sine,
chattering-on sine, and chattering-off sine waves

Pulse waveform group

Gaussian pulse, Lorentz pulse, Haversine, half-sine pulse, trapezoid pulse, and Sin (x)/x

Transient response waveform group

Exponential rise, exponential fall, 2nd order LPF step response, and damped oscillation

Surge waveform group

Oscillation surge and pulse surge

Others group

Trapezoid with offset , half-sine edge pulse, and bottom referenced ramp waves

Arbitrary waveform

Waveform length

4 K to 512 K words (2n, n = 12 to 19) or the number of control
points is 2 to 10,000 (Control points are linearly interpolated.)

Total of waveform
saving capaciy

Up to 128 waves or 4 M words (total of channels 1 and 2),
saved in the nonvolatile memory.

Resolution

16 bit

Sampling rate

120 MS/s

Internal modulation

Modulation waveforms

Other than FSK and PSK: Sine, square (duty of 50%),
triangle (symmetry of 50%),
rising ramp, falling ramp, noise,
arbitrary waveforms
FSK and PSK: Square (duty of 50%)

Modulation
frequency

Other than FSK and PSK: 0.1 mHz to 100 kHz (5-digit/0.1 mHz)
FSK and PSK: 0.1 mHz to 1 MHz (5-digit/0.1 mHz)

External modulation

Input voltage range

1 V full scale (other than FSK and PSK)

Input impedance

10 k, unbalanced (other than FSK and PSK)

Input frequency

DC to 25 kHz (other than FSK and PSK)
DC to 1 MHz (FSK and PSK)

Modulation types and conditions

Carrier waveform: Arbitrary waveform and standard waveform other than noise, pulse, and DC
Peak deviation: 0.00 Hz to less than 15 MHz

FSK

Carrier waveform: Arbitrary waveform and standard waveform other than noise, pulse, and DC
Hop frequency: Within the frequency settable range for each carrier waveform

Carrier waveform: Arbitrary waveform and standard waveform other than noise and DC
Peak deviation : 0.000 to 180.000

PSK

Carrier waveform: Arbitrary waveform and standard waveform other than noise and DC
Deviation : –1800.000 to +1800.000

Carrier waveform: Arbitrary waveform and standard waveform other than DC
Modulation depth: 0.0% to 100.0% (DSB-SC and non-DSB-SC supported)

DC offset modulation

Carrier waveform: Standard waveform and arbitrary waveform
Peak deviation : 0 V to 10 V/open

PWM

Carrier waveform: Square wave and pulse wave
Peak deviation : Square wave of normal duty variable
range : 0.0000% to 49.9900%,
Square wave of extended duty
variable range : 0.0000% to 50.0000%,
Pulse: 0.0000% to 49.9000%

Sweep

Sweep types

Frequency, phase, amplitude, DC offset, and duty

Sweep functions

One-way (ramp wave shape)/shuttle (triangle wave shape) selectable
Linear/logarithmic selectable (only when sweeping the frequency)

Sweep range setting

The start and stop values or the center and span values are specified.

Sweep time setting range

0.1 ms to 10,000 s (4-digit/0.1 ms)

Sweep modes

Continuous/single-shot/gated single-shot selectable Oscillation only occurs during sweep execution in the gated single-shot mode.

Trigger source

Internal/external selectable

Internal trigger oscillator

Period setting range: 100.0 s to 10,000 s (5-digit/0.1 s)

Stop level setting

The signal level while oscillation is stopped in the gated single-shot sweep mode is specified.
Setting range: –100.00% to +100.00% (with reference to the full scale of amplitude) or off

Sweep input/output

Sweep sync/marker output, sweep X drive output, sweep external control input, and sweep external trigger input

Burst/Trigger/Gate

Burst modes

Auto burst, trigger burst, gate, and triggered gate modes (The gate is turned on/off at each trigger in the triggered gate mode.)

Number of mark/space waves

0.5 to 999,999.5 cycles, in 0.5-cycle units

Number of oscillation
waves in the gate mode

1 cycle/0.5 cycles selectable

Phase setting range

–1800.000 to +1800.000

Stop level

The signal level while oscillation is stopped is specified.
Setting range: –100.00% to +100.00%
Oscillation stops at the set oscillation start/stop phase
when the stop level is set to off.

Trigger source

Internal/external selectable, manual trigger allowed

Internal trigger oscillator

1.0 s to 1,000 s (5-digit/0.1 s)

Trigger delay

0.00 s to 100.00 s (5-digit/0.01 s)
Except for latent delay. Valid in the trigger burst mode only.

External trigger input

TTL level, Input impedance 10 k (pulled up to +3.3 V), Unbalanced

Manual trigger

Panel key operation

Sequence

Step control parameters

Step time, hold operation, jump destination, number of jumps, step stop phase, branch operation, step termination control, and step sync code output

Channel parameters in step

Waveform, frequency, phase, amplitude, DC offset,
and square wave duty

Available waveforms

• Sine, square, noise, DC, and arbitrary waveforms
• The ramp and parameter-variable waveforms can be
• used after being saved as arbitrary waveform.

Max. number of usable waveforms

128

Number of saved sequences

10 sequences (saved in the nonvolatile memory)

Number of steps

Up to 255 steps per sequence

Step time

0.1 ms to 1,000 s (4-digit/0.01 ms)

Operation in step

onstant, keep, and linear interpolation (except for waveform switching)

Number of jumps

1 to 999 or unlimited

Branch operation

ranched to the specified step when the branch signal is input.

2-channel Ganged Operation （SG-4322 only）

Channel modes

Two channels independent, two phases (same frequency), constant frequency difference, constant
frequency ratio, and differential output (same frequency, amplitude, DC offset, reversed waveform)

－

Equivalent setting, same operation

Set two channels at the same time.

Frequency difference
setting range

0.00 Hz to less than 30 MHz (resolution: 0.01 Hz)
CH2 frequency – CH1 frequency

Frequency ratio N:M
setting range

1 to 9,999,999 (for N and M, respectively)
N:M = CH2 frequency:CH1 frequency

Phase synchronization

Function to restart from the phase where the output waveforms for all the channels are set, automatic execution at channel mode switching

Other Functions

External 10 MHz requency reference input

Input voltage: 0.5 Vp-p to 5 Vp-p,
sine or square waves

Frequency reference
output

For synchronization when more than one SG-4322 and/or SG-4321 are used.
Output voltage: 1 Vp-p/50 , square wave, 10 MHz

External addition input

Function

Function to add the external signal to the waveform output signal

Addition gain

×2/×10/off selectable
The maximum output voltage range is fixed to 4 Vp-p (×2) or 20 Vp-p (×10).

Input voltage/input frequency

–1 V to +1 V
DC to 10 MHz (–3 dB)

Input impedance

10kΩ, unbalanced

Multi input/output

Used for sweep and sequence control

Synchronization of
multiple units

Sync operation is possible. Up to 6 units can be connected with BNC cables in the form of master / slave connections, using the frequency reference output and external 10 MHz frequency reference input.

User-defined unit

Function

Sets and displays the value in any unit, using a
specified conversion expression.

Setting target

Frequency, period, amplitude, DC offset, phase, and duty

Conversion expression

[(setting target value) + n] ×m or [log10 (setting target value) + n] ×m
The conversion expression, n and m are to be specified.

Unit character string

Up to four characters

Memory to save setting

10 settings can be memorized (saved in the nonvolatile memory).

Interface

GPIB and USBTMC (SCPI-1999 and IEEE-488.2)

Display

3.5” TFT color LCD

Power supply

AC100 V to 230 V 10% (250 V max.) 50 Hz/60 Hz 2 Hz

Power consumption

75VA max.

50VA max.

Operation temperature/
humidity range

0C to +40C, 5%RH to 85%RH
(Absolute humidity: 1 g/m3 to 25 g/m3, no condensation)

Weight

Approx. 2.1 kg (main unit excluding accessories)

Safety

EN61010-1:2001

EMC

EN61326-1:2006

Accessories

・ Instruction Manual (Basic)
・ CD-ROM（PDF manuals, Arbitrary Waveform Editor
• Sequence Editor, LabVIEW driver）
・ Power cord set

●Unless otherwise specified, the value assumes the following conditions: continuous oscillation, load of 50 , oscillation setting of 10 Vp-p/50 , DC offset setting of 0 V, auto range, waveform amplitude range of FS, external addition turned off; the AC voltage is the rms value.
＊1 Guaranteed numerical value. Other numerical values are nominal or typical (typ.) values.
＊2 Used after converted into arbitrary waveform

The main function of the dedicated software

Sequence Editor	Editing functions	・ Initializes, copies, pastes, inserts, and deletes steps ・ Saves and reads sequence data to/from a file ・ Sequence can be edited without connecting the device.
	Display functions	・ Editing screen: Lists parameters for each step. ・ Sequence view screen: Graphs changes of up to five parameters.
	Transfer functions	・ Transfers and reads sequence data to/from the device. ・ Transfers to the device the arbitrary waveform used in the sequence.
	Device control functions	・ Output on/off ・ Starts, stops, and holds the sequence. ・ Can monitor the execution status of sequence.
	Operating environment	・ AT compatible PC that can display 1024×768(pixels) ×256 colors ・ MMicrosoft Windows 2000 or XP ・ USB interface ・ NI-VISA from National Instruments USB driver (required)
Arbitrary Waveform Editor	Editing functions	・ Generation(standard waveform and a mathematical expression) ・ Interpolation (straight line, spline, and continuous spline) ・ Math operation (addition, subtraction, multiplication, and division of waveform) ・ Contraction and extension (vertical and horizontal directions) ・ Cuts, copies, and pastes some part of waveform ・ Undo function ・ Saves and reads arbitrary waveform data to/from a file ・ Waveforms can be edited without connecting the device.
	Display functions	・ Zoom in/out ・ Scroll ・ Display unit (coordinates) selectable ・ Cursor (A, B)
	Transfer function	・ Transfers and reads arbitrary waveform data to/ from the device.
	Device control function	・ Major parameter setting
	Operating environment	*Same as the operating environment for the equence Editor.

Model			SG-4105	SG-4104
Output waveform			Sine wave, square wave, pulse wave, triangle wave, ramp wave, DC output
Output channels			1
Output impedance			50W fixed
Frequency	Sine, square		10mHz-15MHz	10mHz-5MHz
	Pulse		10mHz-100kHz(without DC)
	Others		10mHz-100kHz (without DC)
	Accuracy		±50ppm
	Resolution		10mHz or 5 digits
Amplitude	Range		50mVp-p to 10Vp-p (50W) 100mVp-p to 20Vp-p (open)
	Accuracy (sine 1kHz)		±1%
	Resolution		Except For DC Waveform Output : 0.1mV or 3 digits(50.0mV to 10.0V)
			For DC Waveform Output : 1mV or 3digits(1mV to 5.00V
	Flatness (reference to 1kHz)		Sine: up to 100kHz ±1%	±2%
			Over 100kHz-1MHz ±2%	±3%
			Over 1MHz ±3%	±5%
			Square: up to 100kHz ±3%, Over 100kHz ±5% (SWEEP off for SG-4115)
			Triangle, pulse: ±3% SLOW mode (all waveforms) 100kHz-3.2MHz ±5% for SG-4115 only
Mode			CONT, TRIG, GATE
Offset	Range		±5V (waveform + DC offset less than 5.025V)
	Resolution		1mV or 3digits
	Accuracy		±1% setting value ±5mV (at DC output)
Duty	Square wave		40-60% (more than 5MHz) 20-80% (5MHz or less)
	Others		Pulse wave up to 100kHz is guaranteed for SG-4115 only 0-100% (pulse wave, ramp wave)
Sine wave spectral purity *Amplitude at 10Vp-p	Harmonic distortion *		Up to 100kHz -50dBc Over 100kHz-1MHz -45dBc Over 1MHz-15MHz -35dBc
	Spurious *		100kHz-1MHz -60dBc 1MHz-10MHz -50dBc 10MHz-15MHz -40dBc (SG-4104: up to 5MHz)
	Total harmonic distortion		0.10% at 1Vp-p or more, less than 100kHz 0.30% at less than 1Vp-p, 100kHz
Step response	Overshoot		Square 2% (less than 1MHz) Pulse 2% (1µs or more FWHM ) Full Width at Half Maximum
Rise, Fall time (10%-90%)	Square		20ns or less	35ns or less
	Pulse		300ns or less
SWEEP	Curve		Linear/Log	-
	TYPE		CONTINUOUS: Oscillation continues at STOP frequency
			STOP: Oscillation stops after STOP frequency
	Mode		CONT, GATE, TRIG
	SWEEP TIME		1ms-500s
	Sync out		SWEEP SYNC, SWEEP MARKER
BURST	Number		65536	-
	Mode		CONT, TRIG selectable ON counts or OFF counts
PHASE	Range		±359.9°
	Resolution		0.1°
	Start and Stop phase of TRIG, GATE mode		Available	Available
	Start and Stop phase of SWEEP, BURST mode		Available	-
	Phase between 2 channel signals		Available	-
Pulse motor modulation (available only when PMC option is installed)	Oscillation frequency		10mHz-100kHz	-
	Waveform		Pulse
	Control		CW (one-way control)
	Output		Open collector 1 output
	Sensor input		IN1, IN2
	Mode		LIN-A,: After acceleration, braking by sensor input
			LIN-B: After acceleration, braking by specified pulse counts
	Acceleration, braking curve		Linear
	Pulse counts		16777216
	Acceleration, braking time		1ms-45s
TRIG	Level, polarity		TTL level (H: 2.1V min., L: 0.9V max.)
	Inputs		1
	Input impedance		1kW or more
	Minimum pulse width		100ns
	TRIG delay	Normal mode	Square: 5% of period +350ns Pulse: Period/16384 + 800ns
Setup memory			9
Remote control			GP-IB, RS-232	-
Output			OUT SYNC OUT SWEEP SYNC SWEEP MARKER	OUT SYNC OUT
Input			TRIG/GATE
Power	Voltage		AC100V±10% 110V, 220V, 240V (factory option)
	Frequency		50Hz, 60Hz, 400Hz
	Consumption		Approx. 55VA
Dimensions			Approx. 210W x 99H x 353L mm
Weight			Approx. 4kg
Environment conditions	Storage		-20°C to +60°C/90%R.H. or less
	Operating		0°C to +40°C/85%R.H. or less
Warm up time			30 min. or more
Accessories			Power cord (1), operation manual (1
Factory option			PMC: SG-506	-

The post Signal Generators, IWATSU VIỆT NAM appeared first on cuahangtudonghoa.com.

Digital Multimeters, Iwatsu Việt Nam

cuahangtudonghoa — 2019-04-12 15:43:23

Công Ty TNHH TM và DV Tăng Minh Phát Là nhà phân phối chính hãng IWATSU tại Việt Nam

VOAC7602 IWATSU VIỆT NAM

VOAC7523H IWATSU VIỆT NAM

VOAC7522H IWATSU VIỆT NAM

VOAC7521H IWATSU VIỆT NAM

VOAC7520H IWATSU VIỆT NAM

	Number of digits Full scale	DCV	CH-B DCV	ACV	W	DCA	ACA	Other functions
VOAC7602 IWATSU 1ch	6¹/₂ 1199999	0.1µV	-	0.1µV	0.1mW	1nA	1µA	Histogram / trend display Therm./ Freq./ Math.
VOAC7602 IWATSU 1ch	6¹/₂ 1199999	100mV - 1000V	-	100mV - 750V	100Ω - 100MΩ	1mA - 3A	1A - 3A	Histogram / trend display Therm./ Freq./ Math.
VOAC7523H IWATSU 2ch	5¹/₂ 509999	0.1µV	100µV	1µV	0.1mW	10nA	10nA	Therm./ Freq./ Math.
VOAC7523H IWATSU 2ch	5¹/₂ 509999	50mV - 1000V	5V - 300V	500mV - 750V	50W - 500MW	5mA - 10A	5mA - 10A	Therm./ Freq./ Math.
VOAC7522H IWATSU 1ch	5¹/₂ 509999	0.1µV	-	1µV	0.1mW (2W/4W)	10nA	10nA	Therm./ Freq./ Math.
VOAC7522H IWATSU 1ch	5¹/₂ 509999	50mV - 1000V	-	500mV - 750V	50W - 500MW	5mA - 10A	5mA - 10A	Therm./ Freq./ Math.
VOAC7520H IWATSU 2ch	5¹/₂ 509999	1µV	100µV	1µV	0.1mW	10nA	10nA	Therm./ Freq./ Math.
VOAC7520H IWATSU 2ch	5¹/₂ 509999	500mV - 1000V	5V - 300V	500mV - 750V	50W - 500MW	5mA - 10A	5mA - 10A	Therm./ Freq./ Math.
VOAC7521H IWATSU 1ch	5¹/₂ 509999	1µV	-	1µV	0.1mW (2W/4W)	10nA	10nA	Therm./ Freq./ Math.
VOAC7521H IWATSU 1ch	5¹/₂ 509999	500mV - 1000V	-	500mV - 750V	50W - 500MW	5mA - 10A	5mA - 10A	Therm./ Freq./ Math.

Digital Multimeter VOAC7602

Basic performances

Display

Display digit		Measurement speed
6 ¹／₂digits	Full scale 1199999	50S/s (60S/s Power Freq. at 60Hz)
5 ¹／₂digits	Full scale119999	30kS/s

Measurements
DC Voltage	Range	100mV - 1000V
	Input impedance	1GΩ or more, or 10MΩ
	Input bias current	＜30pA
AC Voltage	Range	100mV - 750V
	Frequency	20Hz - 300kHz
	Crest Factor	Less than 5
	Input impedance	1MΩ //100pF
	AC filter	20Hz, 200Hz
Resistance(2WΩ4WΩ)	Range	100Ω to 100MΩ
DC current	Range	1mA to 3A
AC current	Range	1A,3A
Continuity measurement （CONT)		Yes
Diode measurement （DIODE)		Yes
Frequency measurement （FREQ)		3Hz to 300kHz
Temperature measurement （TEMP)		Thermocouple （TYPE- R, K, T, J ,E) Manual input of cold junction temperature , RTD (2-wire or 4-wire）

Interfaces
Standard	USB2.0
Optional	LAN&RS-232(SC-361) / DIO(SC-362) / GPIB(SC-363)

Functions
Difference operation (NULL)		Yes
Moving average operation		2 - 100 times
Statistical calculation (MAX/MIN/AVG/SDT）		Yes
LIMIT judgment
Scaling operation
Decibel operation
Measurement data memory(logging)		100k Readings
Pre-triggering / level triggering		Supported by the latest firmware
Panel setup memory		Internal 10 + USB Storage memory
Panel setup sequence		Internal memory (Optional RS-232 is required)
Analog meter display		Yes
Panel lock function
Interval measurement
Trend chart display	Real Time	Yes
	Offline	Supported by the latest firmware
	Cursor & Search
Histogram display	Real Time	Yes
	Offline	Supported by the latest firmware
	Cursor & Search
USB host		Panel setup, measurement data and hard copy can be stored in USB memory

Dimension / Weight
Dimension (mm)	Approx. 225W × 100H × 366D（Excluding the protrusion part） Approx. 213W × 88H × 356D (Excluding the protector part）
Weight	Approx. 3kg
Protector	Yes

Others
Operating temperature and humidity range	0°C to 50°C (+40°C 80% or less comparable volume water) and no condensing
Storage temperature and humidity range	-20°C to +60°C　（+40°C 90% or less comparable volume water）and no condensing
Power supply and Power consumption	AC100V,50/60Hz, less than 21 VA 110V / 220V / 240V(Optional)
Accessories	Test leads, Fuse, CD-ROM Operation manual, Power cord

Digital Multimeters VOAC7523H / VOAC7522H / VOAC7520H / VOAC7521HSpecifications

*	Accuracy (±X% of reading +Y digits) indicated by X+Y
	The measuring accuracy indicated below can be obtained for a year following the calibration of the instrument.

1. Typical Sample Rate and Resolution

Sample Rate	Resolution	Reading Rate	Hum Rejection
SLOW	5.5-digit	approx. 4 times/sec	Yes
MID	5.5-digit	approx. 20 times/sec	Yes
FAST	4.5-digit	approx. 100 times/sec	N/A

2. DC Volt (DCV) 50mV range is for the VOAC7523H / 7522H only.

Range	Resolution		Input Resistance	Accuracy*
Range	5.5-digit	4.5-digit	Input Resistance	SLOW/MID	FAST
50mV	0.1µV	1µV	100MW or more	0.025+10	0.025+15
500mV	1µV	10µV	1000MW or more	0.012+5	0.012+10
5V	10µV	100µV	1000MW or more	0.012+2	0.012+7
50V	100µV	1mV	approx. 10MW	0.016+5	0.016+10
500V	1mV	10mV		0.016+2	0.016+7
1000V	10mV	100mV		0.016+2	0.016+7

The accuracy in the 50mV and 500mV ranges is specified after zero compensation through the REL operation.
Sample rate in the 50mV range SLOW/MID: Approx. 0.5 times/sec, FAST: Approx. 50 times/sec
Max. input voltage:	50mV to 5V range ± 800V (continuous) 50V to 1000V range ± 1100V (continuous)

Resolution and noise rejection

Resolution	Sample Rate	NMRR	CMRR
5.5-digit	SLOW	55dB or more	120dB or more
5.5-digit	MID	55dB or more	120dB or more
4.5-digit	FAST	0dB	55dB or more

3. CH-B DC Volt (DCV) VOAC7523H / 7520H only

Range	Resolution	Input Resistance	Accuracy*
Range	4.5-digit	Input Resistance	SLOW/MID	FAST
5V	100µV	CH-B:H to CH-B:L 10MW ± 3% CH-B:H to CH-A:L 5MW ± 3% CH-B:L to CH-A:L 5MW ± 3%	0.025+2	0.025+30
50V	1mV			0.025+8
300V	10mV			0.025+5

Max. input voltage:

± 300V, between CH-A L and CH-B ± 300V

Resolution and noise rejection

Resolution	Sample Rate	NMRR	CMRR	Isolation between CH-A and CH-B
4.5-digit	SLOW/MID	55dB or more	120dB or more	56dB or more
4.5-digit	FAST	0dB	55dB or more	56dB or more

4. AC Volt (ACV, DC+ACV) detection of True RMS
Up to 100kHz for VOAC7521H / 7520H

Range	Resolution	Measurement Range		Input Resistance
Range	5.5-digit	SLOW	MID/FAST	Input Resistance
500mV	1µV	15Hz to 300kHz	200Hz to 300kHz	less than approx. 1MW // 100pF
5V	10µV
50V	100µV
500V	1mV	45Hz to 100kHz	200Hz to 100kHz
750V	10mV	45Hz to 20kHz	200Hz to 20kHz

Accuracy: SLOW Sample (Sine wave Amplitude at 5% to 100% of fullscale of range)

Frequency	Accuracy*
15Hz to 45Hz	0.5+150
45Hz to 100Hz	0.25+150
100Hz to 30kHz	0.2+150
30kHz to 100kHz	0.5+300
100kHz to 300kHz	2.5+1000

Coefficient to input other than sine wave

Crest Factor	Crest Factor
Crest Factor	1 to 1.5	1.5 to 2	2 to 3
15Hz to 30kHz	0.05%	0.15%	0.30%
30kHz to 300kHz	0.20%	-	-

Resnponse time

Sample Rate	Resolution	Reading Rate	Response Time
SLOW	5.5-digit	4 times/sec	less than 3 sec
MID/FAST	5.5-digit	20 times/sec	less than 2 sec

Max. input voltage: 780Vrms, ± 1100V DC (continuous)

In the case of DC+ACV, 500 (less than 45Hz) or 300 (45Hz or higher) must be added to the value of Accuracy digit in above.

Sample rate of FAST becomes the same values as MID (approx. 20 times/sec).

5. DC Current (DCA)

Range	Resolution		Accuracy*		Input Resistance
Range	5.5-digit	4.5-digit	SLOW/MID	FAST	Input Resistance
5mA	10nA	100nA	0.05+7	0.05+17	150W or less
50mA	100nA	1µA			15W or less
500mA	1µA	10µA			2W or less
10A	100µA	1mA	0.2+7	0.2+17	0.1W or less

Auto range is not available between 5mA to 500mA range and 10A range because of using different input terminals.
Max. input current:	500mA at 5mA to 500mA ranges (FUSE 0.5A/250V) 10A at 10A range (FUSE 15A/250V)

6. AC Current (ACA, DC+ACA)

Range	Resolution	Measurement Range		Input Resistance
Range	5.5-digit	SLOW/MID	FAST	Input Resistance
5mA	10nA	15Hz to 5kHz	200Hz to 5kHz	150W or less
50mA	100nA	15Hz to 5kHz		15W or less
500mA	1µA	45Hz to 5kHz		2W or less
10A	100µA	45Hz to 5kHz		0.1W or less

Accuracy: SLOW Sample (Sine wave) amplitude at 5% to 100% of fullscale (10% to 100% for10A range)

Frequency	Accuracy*	Crest Factor
		1 to 1.5	1.5 to 2	2 to 3
15Hz to 45Hz	1+200	0.05%	0.15%	0.30%
45Hz to 1kHz	0.4+200
1kHz to 5kHz	5.0+200

Response time

Sample Rate	Resolution	Reading Range	Response time
SLOW	5.5-digit	4 times/sec	less than 3 sec
MID/FAST	5.5-digit	20 times/sec	less than 2 sec

Max. input current:	500mA for 5mA to 500mA ranges (FUSE 0.5A) 10A for 10A range (FUSE 15A)
DC Component on input current must be included in the Max. input current.
In the case of 10A range at 45Hz to 1kHz, 0.3 must be added to %.
In the case of DC+ACA, 500 (less than 45Hz) or 300 (45Hz or higher) must be added to the value of Accuracy in above.
Sample rate of FAST becomes the same value as MID (approx. 20 times/sec).

7. Resistance (2 WireW/4 WireW) 4 WireW: VOAC7522H / 7521H only

Range	Resolution		Accuracy*		Test Current
Range	SLOW/MID	FAST	SLOW/MID	FAST	Test Current
50W	0.1mW	1mW	0.025+10	0.025+15	approx. 10mA
500W	1mW	10mW	0.014+3	0.014+8	approx. 10mA
5kW	10mW	0.1W			approx. 1mA
50kW	0.1W	1W			approx. 100µA
500kW	1W	10W	0.015+3	0.015+33	approx. 10µA
5MW	10W	10W	0.033+30	0.033+30	approx. 1µA
50MW	100W	100W	0.25+30	0.25+30	approx. 100nA
500MW	1kW	1kW	1.5+50	1.5+50	approx. 10nA

Max. input voltage: ± 500V peak	Open circuit test voltage: 12V or less
The accuracy at 50W to 5kW range are specified after zero compensation through the REL operation.
Sample rate of FAST at 5MW to 500MW range becomes the same value as MID (approx. 20 times/sec).

8. Low-Power Resistance (2 WireW)

Range	Resolution	Accuracy*		Test Current
Range	SLOW/MID/FAST	SLOW/MID	FAST	Test Current
500W	10mW	0.1+5	0.1+15	approx. 1mA
5kW	0.1W			approx. 100µA
50kW	1W			approx. 10µA
500kW	10W	0.2+30	0.2+40	approx. 1µA
5MW	100W	0.2+30	0.2+30	approx. 100nA
50MW	1kW	1.5+30	1.5+30	approx. 10nA

Max. input voltage: ± 500V peak	Open circuit test voltage: 12V or less
The accuracy at 500W to 5kW range are specified after zero compensation through the REL operation.
Sample rate of FAST at 5MW to 500MW range becomes the same value as MID (approx. 20 times/sec).
Indications are in 4.5 digits for SLOW, MID, and FAST.

9. Diode

Test Current	Measurement Range	Accuracy*	Open Circuit Test Voltave	Max. Input Voltave
approx. 1mA or 10mA	0.1mV to 5.0999V	0.014+13	12V or less	± 500V peak

10. Temperature

Thermocouple	Temperature Range to be Measured	Accuracy*	Resolution	Max. Input Voltave
R	-50°C to 0°C	0.2+70	0.1°C	± 500V peak
	0°C to +100°C	0.2+50
	+100°C to +1768°C	0.2+30
K(CA)	-200°C to -100°C	0.15+50
	-100°C to 0°C	0.15+35
	0°C to +1372°C	0.15+20
T(CC)	-200°C to -100°C	0.15+50
	-100°C to 0°C	0.15+35
	0°C to +400°C	0.15+20
J(IC)	-200°C to -100°C	0.15+50
	-100°C to 0°C	0.15+35
	0°C to +1200°C	0.15+20
E(CRC)	-200°C to -100°C	0.15+50
	-100°C to 0°C	0.15+35
	0°C to +1000°C	0.15+20

The above accuracy values do not include the thermocouple accuracy.
±0.1°C/°C is added (for all thermocouples) with the operating ambient temperature of this product at 0°C to 18°C and 28°C to 50°C.
accuracy is not specified. In the temperature range to be measured at -200°C or lower,
The reference thermo electric force is calculated by the "broken line approximation" according to JIS C 1602-1995.
If this product and the thermocouple are connected via a plug, an error for contact temperature compensation is added.

11. Frequency (AC couple, Crest Factor: less than 3)

Sample Rate	Reading Rate (Gate time)	Display Digits and Measurement Range		Accuracy*
SLOW	approx. 0.5 times/sec (1s)	6-digit	15.0000Hz to 1.00000MHz	0.02+2
MID	approx. 4 times/sec (100ms)	5-digit	15.000Hz to 1.0000MHz
FAST	approx. 10 times/sec (10ms)	4-digit	150.00Hz to 1.000MHz

AC couple: Crest factor <=3

AUTO range of ACV must be used with input attenuator.
Max. input voltage: 780 Vrms, ± 1100V peak

12. Chart for combination of Dual Function

	DCV	CH-B DCV ^(*1)	ACV	DC+ ACV	DCA	ACA	DC+ ACA	2 WireW	4 WireW^(*2)	Hz	°C
DCV
CH-B DCV ^(*1)									-
ACV
DC+ACV
DCA
ACA
DC+ACA
2 WireW
4 WireW^(*2)		-
Hz
°C

: Available

: have a limitation

: N/A

- : not provided

(*1) CH-B DCV: VOAC7523H / 7520H only

(*2) 4 WireW: VOAC7522H / 7521H only

13. General

MATH		Moving Average, Scale, Decibel (dBm, dBµ), Difference, Statistics (MAX, MIN, , s), Comparison (COMP), Arithmetic Calculation between Dual Function
Memory	DATA	Max. 3000 data with 10 msec resolution time mark (Elapsed time)
Memory	SET UP	10
Interfaces (Full Remote)	Standard	RS-232
Interfaces (Full Remote)	Option	LAN, GP-IB
Power Supply	Voltage	AC100V, 110V, 220V, 240V
	Frequency	50Hz, 60Hz
	Power Consumption	21 VA (includes options) or less
Operation Temperature and Humidity		0°C to +50°C (less than 80%RH) no condensation, 70%RH or less at +40°C to +50°C
Storage Temperature and Humidity		-20°C to +60°C (70%RH or less) no condensation, includes operation temperature
Size	Measurement	210W x 99H x 353L mm (Options are built into the main unit)
Size	Weight	3.5kg (includes options) or less
Standard Accessories		Fuse, Test Leads, Alignment Screwdriver, Operation Manual(CD-ROM), Power cord

The post Digital Multimeters, Iwatsu Việt Nam appeared first on cuahangtudonghoa.com.

DG-8000 BỘ TẠO XUNG IWATSU, IWATSU VIỆT NAM

cuahangtudonghoa — 2019-04-12 15:21:48

Công Ty TNHH TM và DV Tăng Minh Phát Là nhà phân phối chính hãng IWATSU tại Việt Nam

Bộ tạo xung 6 kênh DG-8000 IWATSU Việt Nam:

	Product name	Model number	Incorporated function
Main unit	Delay pattern generator	DG-8000 IWATSU VIỆT NAM	-
Software option	Inverter and PPG option	DG-801 IWATSU VIỆT NAM	INVERTER mode
	Inverter and PPG option	DG-801 IWATSU VIỆT NAM	PPG mode
	Operation pattern option	DG-802 IWATSU VIỆT NAM	Operation pattern function
Hardware option	External modulation option	DG-601 IWATSU VIỆT NAM	External modulation function
Hardware option	Quick synchronization option	DG-602 IWATSU VIỆT NAM	Quick synchronization function

Kiểm soát khoảng cách để ngăn chặn các thiết bị trên và dưới được bật cùng một lúc

Nếu các thiết bị pha U và X trong hình trên được bật cùng lúc, chúng sẽ bị đoản mạch, gây nguy hiểm.
Sử dụng chức năng kiểm soát thời gian khoảng cách DG-8000 sẽ tự động tạo ra thời gian chết được chỉ định như trong hình. Ngay cả khi tần số hoặc chu kỳ thay đổi, thời gian chết vẫn không đổi. Thời gian khoảng cách có thể được thay đổi ngay cả trong quá trình dao động. Cũng có thể làm cho các thiết bị bật cùng một lúc bằng cách chỉ định một giá trị âm.

Kiểm soát độc lập trục thời gian và trục dọc


Thay đổi tần số	Thay đổi mức đầu ra
Các tham số liên quan đến trục thời gian và các tham số liên quan đến trục dọc được kiểm soát riêng. Các tham số này có thể được thay đổi bằng tay hoặc bằng cách sử dụng các lệnh từ xa.

Hỗ trợ đầu ra ORed trên kênh 1

Kênh 1 có chức năng đầu ra ORed, bổ sung một cách hợp lý lên đến mười hai xung của các kênh được chỉ định và đưa ra kết quả.

Dễ dàng tạo tín hiệu PWM

Tùy chọn biến tần và PPG cho phép bạn xuất tín hiệu điều khiển cho bộ cắt buck, đơn cực một pha, lưỡng cực một pha và hai mức ba pha.
Tần số điều chế và mức độ điều chế có thể được thay đổi ngay cả trong quá trình dao động.
Điều này thuận tiện cho việc kiểm tra các bộ biến tần bởi vì có thể thu được đầu ra mà điều chế độ rộng xung được tạo ra từ sóng hình sin bên trong và sóng tam giác được áp dụng.

<Ví dụ cấu hình>
Đơn vị chính DG-8000: 1
biến tần DG-801 và tùy chọn PPG: 1

Lưu ý 1:

Sóng điều chế chỉ được hiển thị cho lời giải thích này. Sóng này không phải là đầu ra trong một môi trường thực.

Khi sử dụng hàm PPG, bộ tạo này hoạt động như một bộ tạo tín hiệu logic phức tạp cho sáu kênh sử dụng các mẫu xung được xác định trước.
Các mẫu dạng sóng có thể được tạo bằng ứng dụng tạo dạng sóng (có sẵn miễn phí).

Điều khiển biến tần số tín hiệu PWM

Tùy chọn mẫu hoạt động thuận tiện cho kiểm tra hoạt động liên tục vì nó cho phép điều khiển biến tần số và mức độ điều chế (chỉ ở chế độ biến tần).
Các mẫu cho điều khiển như vậy được kiểm soát bằng cách sử dụng các dạng sóng tùy ý định trước.Những dạng sóng này có thể được tạo bằng ứng dụng tạo dạng sóng (có sẵn miễn phí).

Hình bên trái cho thấy một ví dụ khi sóng hình thang được sử dụng để áp dụng điều chế tần số.

<Ví dụ cấu hình>
Đơn vị chính DG-8000: 1
tùy chọn DG-801 biến tần và PPG: 1
tùy chọn mẫu hoạt động DG-802: 1

Lưu ý 1:

Sóng điều chế chỉ được hiển thị cho lời giải thích này. Sóng này không phải là đầu ra trong một môi trường thực.

Trong chế độ biến tần, các mẫu bị lỗi trong thời gian khe hở có thể được chèn vào các khoảng thời gian đều đặn bằng cách sử dụng chức năng chèn lỗi.

Ví dụ ứng dụng: kiểm tra hoạt động liên tục của điện từ và các yếu tố khác điều khiển van điện từ

Tùy chọn điều chế ngoài cho phép điều khiển bên ngoài các chức năng sau:
- Điều chế độ rộng và độ trễ xung ở chế độ Cơ bản
- Điều khiển mức độ điều chế ở chế độ biến tần
- Điều khiển tần số và mức độ điều chế cho các mẫu hoạt động

<Ví dụ cấu hình>
Đơn vị chính DG-8000: 1
tùy chọn mẫu hoạt động DG-802: 1
tùy chọn điều chế bên ngoài DG-601:

Hoạt động song song của ba máy phát để hỗ trợ đầu ra từ 18 kênh

Tùy chọn đồng bộ hóa nhanh chóng nhanh chóng cho phép tối đa ba máy phát hoạt động đồng bộ bằng cách kết nối nhiều cáp BNC với bảng điều khiển phía sau. Nếu một trong các máy phát bị hỏng, hai máy phát còn lại cũng dừng do không an toàn khi chức năng này được sử dụng.

<Ví dụ cấu hình>
Đơn vị chính DG-8000: 3
tùy chọn đồng bộ hóa nhanh DG-602: 3

Common specifications

Item		DG-8000
Pulse output terminal
	Number of channels	6
	Output level	±10 V (open) / ±5 V (50 W)
	Output range	Two ranges (large/small)
	Output logic	Positive/negative
	Output impedance	50 W
	ORed output	Effective channels among channels 1 to 6 are ORed and the result is output (from channel 1)
Other output terminals
	SYNC OUT	BNC terminal (1)
	IRREGULAR	BNC terminal (1)
	ALARM output	BNC terminal (1)
	10 MHz REF output	BNC terminal (1)
	REAR TRIG output	Quick synchronization operation option (under development), BNC terminal (1)
Input terminals
	TRIG	BNC terminal (1), input: ±5 V, threshold: ±2.5 V
	TRIG INH/RDY	BNC terminal (1), TTL level
	Emergency stop input	BNC terminal (1), TTL level
	10 MHz REF input	BNC terminal (1), 1V P-P ±100 ppm or more
	Frequency control input	External modulation option and operation pattern option, BNC terminal (1)
	External modulation (PWM)	External modulation option, BNC terminal (3)
	REAR TRIG input	Quick synchronization operation option, BNC terminal (1)
	ALARM SENSE input	Quick synchronization operation option, BNC terminal (1)
Output control
	Oscillation start/stop	A button is provided to turn all channels on or off at once
	Individual setting	Enable or disable each channel by using the setting menu.
	When oscillation stops	Select relay OFF or fix the level to 0.
LED display
	TRIG'd	Lights up when TRIG is applied.
	OUTPUT, channels 1 to 6	Lights up when output is enabled and on.
	REMOTE	Lights up in the REMOTE status.
	INHIBIT/READY	Lights up when oscillation is possible.
Pulse generation
	Oscillation mode	CONT, TRIG'd CONT, TRIG, GATE
	Gap control	Supported. *Gap control is a function that ensures non-overlapping time when phases V and X, phases V and Y, and phases W and Z overlap each other by specifying a delay or pulse width. This function can be also used to intentionally make these phases overlap.
Interface
	USB	USB1.1 storage function only
	Remote (LAN)	100BASE‐TX, 10BASE‐T
	Remote (GPIB)	Supported
Screen display
	LCD	4.7-inch color LCD
	Resolution	320 x 240 dots
Miscellaneous
	SETUP saving/replay	Supported (10 internal memories)
	Power-saving mode	Supported
	Beep function	Supported
	Status display	Supported
Power supply unit
	AC power supply	100 V to 240V (50/60 Hz)
	Power consumption	190 VAmax
Mechanism section
	External dimensions (mm)	Approx. 400 (W) x 150 (H) x 497 (D) (without including the projections)
	Weight	Approx. 8 kg
Environment
	Operating temperature	0 °C to 40 °C (without condensation)
	Operating humidity	85% R.H. or less at 40 °C
	Storage temperature	-20 °C to +60 °C
Accessories
	Power cable	1
	Operation manual	CD-R (1)

Other specifications

Basic mode
Mode		Independent control of six channels, three-phase patterns A/B
Six independent channels
	Number of pulses	SINGLE/DOUBLE
	Frequency/cycle	1 mHz to 10 MHz (1 mHz or 9-digit resolution) 100 ns to 1000 s (10 ns or 9-digit resolution)
	Frequency/cycle precision	±50 ppm
	Standard channel	Select SYNC or both edges of a channel that has a smaller number.
	Delay value	0 ns, 10 ns to 1000 s (10 ns or 9-digit resolution)
	Pulse width	0 ns, 50 ns to 1000 s (10 ns or 9-digit resolution)
	PHASE	0° to 360° (minimum resolution: 0.01°, frequency-dependent) 0% to 100% (minimum resolution: 0.001%, frequency-dependent)
	DUTY	0° to 360° (minimum resolution: 0.01°, frequency-dependent) 0% to 100% (minimum resolution: 0.001%, frequency-dependent)
	Gap time setting	0 to ±1 cycle or 1 s
	Gap resolution	Frequency setting: 20 ns or 6 digits Cycle setting: 10 ns or 6 digits
	Frequency dividing function	Supported
	Frequency dividing setting range	1 to 65535
	Tracking	Multiple parameters can be changed at the same time.
	Internal modulation	PWM modulation and delay modulation
Three-phase pattern A
	Oscillation mode	CONT, TRIG'd CONT, GATE
	Cycle (Tc)	Determined by setting Tw1 and Tw2. Tc = (Tw1+Tw2) x 3
	Tw1 and Tw2 setting range	0 ns, 100 ns to 100 s
	Tw3 setting range	0 ns, 100 ns or more (Fc-Tw1)
	Pulse width setting resolution	100 ns or 9 digits
	Gap control	Realized by setting Tw3.
	Operation during oscillation	Parameters can be seamlessly changed.
Three-phase pattern B
	Oscillation mode	CONT, TRIG'd CONT, GATE
	Cycle (Tc)	Determined by setting Tw1 and Tw3. Tc = (Tw1+Tw3) 3/2
	Tw1 setting range	0 ns, 100 ns to 100 s
	Tw2 setting range	0 ns, 100 ns or more (Fc-2 x Tw1)
	Tw3 setting range	100 ns to 100 s
	Pulse width setting resolution	100 ns or 9 digits
	Gap control	Realized by setting Tw2.
	Operation during oscillation	Parameters can be seamlessly changed.

Inverter mode (with the DG-801 inverter and PPG option mounted)
Mode		Buck chopper, single-phase unipolar, single-phase bipolar, two three-phase levels
Common setting parameters
	Carrier frequency	100 mHz to 1 MHz
	Modulation frequency	1 mHz to 10 kHz
	Other parameters	Modulation ratio, modulation degree, gap time, and others

PPG mode (with the DG-801 inverter and PPG option mounted)
Frequency specification mode
	Frequency	1 mHz to 10 MHz (1 mHz or 6-digit resolution)
	Memory length	10 kW or 100 kW
Clock specification mode
	CK frequency	100 Hz to 100 MHz (resolution: 1 mHz or 6 digits)
	Memory length	10 kW or 100 kW

Operation pattern (with the DG-802 operation pattern option mounted)
Frequency control	The frequency (cycle) can be controlled using any waveform or external input.
Frequency control input	BNC terminal (1)
Modulation degree control	INVERTER mode only The modulation degree can be controlled using any waveform or external input.
Faulty pattern insertion

External modulation (with the DG-601 external modulation option mounted)
External modulation input	BNC terminal (3)
Frequency control input	BNC terminal (1)
Input range	Two steps (-2 to 2V or 0 to 2V)
Input impedance	Approx. 1 MW
Resolution	12 bits
Frequency characteristics	100 kHz, amplitude of 90% or more (1 kHz standard)

Quick synchronization operation (with the DG-602 quick synchronization option mounted)
REAR TRIG output	BNC terminal (2)
REAR TRIG input	BNC terminal (1)
ALARM SENSE input	BNC terminal (1)

The post DG-8000 BỘ TẠO XUNG IWATSU, IWATSU VIỆT NAM appeared first on cuahangtudonghoa.com.

SE-6000/SE-6011 IWATSU, Máy dò Iwatsu Việt Nam

cuahangtudonghoa — 2019-04-12 15:03:37

Công Ty TNHH TM và DV Tăng Minh Phát Là nhà phân phối chính hãng IWATSU tại Việt Nam

Đầu dò cách ly SE-6000/SE-6011

Thực hiện các phép đo dạng sóng với độ phân giải cao và an toàn trong môi trường điện áp cao trong các hệ thống cách ly các đầu vào / đầu ra thông qua điện quang

[ISOLATION UNIT SE-6011 Specifications]

Item		Specification
Number of channels		1
Frequency bandwidth (-3dB)		30MHz( Input to Unit ～Output from AMP)
Input impedance		1MΩ//20pF
Input coupling		DC, AC, GND
Input range (Full scale)		±50mV,±100mV, ±200mV, ±500mV,±1V, ±2V, ±5V,±10V, ±20V, ±50V In DSO mode: ±40mV,±80mV,±200mV, ±400mV,±800mV, ±2V, ±4V, ±8V,±20V, ±40V
Input filter		OFF, 10MHz, 1MHz, 100kHz
Probe system		Auto detection, Manual setting
Max. Input voltage		400Vpeak
Offset voltage		±50mV to ±200mV : ±1V / ±500mV to ±2V : ±10V / ±5V to ±50V : ±100V
ADC		14bit 100MS/s
Automatic calibration		Available per channel
Input connector		BNC (the metal parts are covered by the insulation cases.)
LED display	Indicator	Power status: at the side of operating battery ON/OFF. Battery status: Change flashing speed by remaining power level.
Power supply	Battery	Li-ion battery(Max. 2pces)
Operation time (Under operating temperature)		Battery 1pce: 12 hours / Battery 2pces: 24 hours *1 pce equipped as standard
Output (Optical I/F connector)		Twin LC connector ×1
External dimensions		Approx. 95W x 205H x 315D (mm)

[ISOLATION AMP SE-6000 Specifications]

Item	Specification
Number of channels	4
DAC	14bit 100MS/s
Output voltage (Impedance)	±1V(50ohm)、±2V(1Mohm) In DSO mode: ±800mV(50ohm)、±1.6V(1Mohm)
Monitor display	4.3" Color LCD with back light : Brightness High/Low selectable
Auto range	Range, Offset auto detection
Input (Optical I/F Connector)	Twin LC connector ×4
Output	BNC×4
External interface	USB (for Save and Recall), LAN (for Remote recall)
External dimensions	Approx. 226W x 100H x 366D (mm)

[Options]

Optical fiber	3m, 10m, 50m(Heavy duty type), 200m (Made to order)
Battery	Li-ion battery(1pc. equipped as standard)
Battery charger	2-bay type

[Configulation]

Model Name		Type name
ISOLATION AMP		SE-6000 IWATSU VIỆT NAM
ISOLATION UNIT		SE-6011 IWATSU VIỆT NAM
Battery charger (2-bay type)		CH-5050A IWATSU VIỆT NAM
Battery		NH-2054 IWATSU VIỆT NAM
Optical fiber cable	3m	SE-605 IWATSU VIỆT NAM
	10m	SE-606 IWATSU VIỆT NAM
	50m (Heavy duty type)	SE-607 IWATSU VIỆT NAM
	200m	Made to order

The post SE-6000/SE-6011 IWATSU, Máy dò Iwatsu Việt Nam appeared first on cuahangtudonghoa.com.

Digital Oscilloscopes IWATSU VIỆT NAM

cuahangtudonghoa — 2019-04-12 14:50:01

Công Ty TNHH TM và DV Tăng Minh Phát Là nhà phân phối chính hãng IWATSU tại Việt Nam

Máy hiện sóng IWATSU Việt Nam

Máy dò sóng chuyên dùng cho ngành sửa chữa các thiết bị điện

Item	Model	Input Channels	Frequency Bandwidth	Sampling Rate	Acquisition Memory (Points)
Digital Oscilloscopes DS-5600 Series	DS-5654 IWATSU VIỆT NAM	4ch	500MHz	2GS/s	2.5M Points
	DS-5652 IWATSU VIỆT NAM	2ch	500MHz
	DS-5634 IWATSU VIỆT NAM	4ch	350MHz
	DS-5632 IWATSU VIỆT NAM	2ch	350MHz
	DS-5624 IWATSU VIỆT NAM	4ch	200MHz
	DS-5622 IWATSU VIỆT NAM	2ch	200MHz
	DS-5614 IWATSU VIỆT NAM	4ch	100MHz
	DS-5612 IWATSU VIỆT NAM	2ch	100MHz
Digital Oscilloscopes DS-5500A Series	DS-5554A IWATSU VIỆT NAM	4ch	500MHz	2GS/s	1M Points
	DS-5552A IWATSU VIỆT NAM	2ch	500MHz
	DS-5534A IWATSU VIỆT NAM	4ch	350MHz
	DS-5532A IWATSU VIỆT NAM	2ch	350MHz
	DS-5524A IWATSU VIỆT NAM	4ch	200MHz
	DS-5522A IWATSU VIỆT NAM	2ch	200MHz
	DS-5514A IWATSU VIỆT NAM	4ch	100MHz	1GS/s
	DS-5512A IWATSU VIỆT NAM	2ch	100MHz	1GS/s
Digital Oscilloscopes DS-5500 Series	DS-5554 IWATSU VIỆT NAM	4ch	500MHz	2GS/s	1M Points
	DS-5552 IWATSU VIỆT NAM	2ch	500MHz
	DS-5534 IWATSU VIỆT NAM	4ch	350MHz
	DS-5532 IWATSU VIỆT NAM	2ch	350MHz
	DS-5524 IWATSU VIỆT NAM	4ch	200MHz
	DS-5522 IWATSU VIỆT NAM	2ch	200MHz
	DS-5514 IWATSU VIỆT NAM	4ch	100MHz	1GS/s
	DS-5512 IWATSU VIỆT NAM	2ch	100MHz	1GS/s
Digital Oscilloscopes DS-5400 Series	DS-5424 IWATSU VIỆT NAM	4ch	200MHz	2GS/s	500k Points
	DS-5422 IWATSU VIỆT NAM	2ch	200MHz	2GS/s
	DS-5414 IWATSU VIỆT NAM	4ch	100MHz	1GS/s
	DS-5412 IWATSU VIỆT NAM	2ch	100MHz	1GS/s

The post Digital Oscilloscopes IWATSU VIỆT NAM appeared first on cuahangtudonghoa.com.

Isolation System, IWATSU VIỆT NAM

cuahangtudonghoa — 2019-04-12 14:22:11

Công Ty TNHH TM và DV Tăng Minh Phát Là nhà phân phối chính hãng IWATSU tại Việt Nam

Đại lý IWATSU tại Việt Nam

Product name	Model number
High-speed main unit *1	DM-8000H IWATSU VIỆT NAM
Acquisition control card	DM-610A IWATSU VIỆT NAM
Transceiver card (optical x 2)	DM-600A IWATSU VIỆT NAM
Isolation unit (500 k points) *2	DM-900A IWATSU VIỆT NAM
Isolation unit (16 M points) *2	DM-900AL IWATSU VIỆT NAM
Isolation unit (high resolution, 500 k points) *3	DM-910A IWATSU VIỆT NAM
Isolation unit (high resolution, 16 M points) *3	DM-910AL IWATSU VIỆT NAM

Optical fiber cable S (2m) *4	DM-002 IWATSU VIỆT NAM
Optical fiber cable S (5m) *4	DM-004 IWATSU VIỆT NAM
Optical fiber cable (5m)	DM-005 IWATSU VIỆT NAM
Optical fiber cable (10m)	DM-006 IWATSU VIỆT NAM
Optical fiber cable (20m)	DM-007 IWATSU VIỆT NAM
Optical fiber cable (50m)	DM-008 IWATSU VIỆT NAM
Optical fiber cable (100m)	DM-009 IWATSU VIỆT NAM
Optical fiber cable (200m)	DM-010 IWATSU VIỆT NAM
Acquisition cable (2m)	DM-105 IWATSU VIỆT NAM
Acquisition cable (5m)	DM-106 IWATSU VIỆT NAM
Battery pack *5	NL_2044HD22 IWATSU VIỆT NAM

The post Isolation System, IWATSU VIỆT NAM appeared first on cuahangtudonghoa.com.

B-H Analyzers, IWATSU VIỆT NAM

cuahangtudonghoa — 2019-04-12 13:49:45

Công Ty TNHH TM và DV Tăng Minh Phát Là nhà phân phối chính hãng IWATSU tại Việt Nam

Máy phân tích BH SY-8218 IWATSU, SY-8219 IWATSU:

Item		Specification
Measurementmethod		CROSS-POWER method (conformance to IEC62044-3)
MeasurementItem (Symbol)		Max. Magnetic fluxdensity(Bm), Residual magneticflux density(Br), Max.Magneticfield strength(Hm), Coersiveforce(Hc), Rectangular ratio(Br/Bm), Relative amplitude permeability(µa), Core loss(Pc,Pcv,Pcm), Primary excitation current(I1m), Secondary induced voltage(V2m), Phase(θ), Total magnetic flux linkage(2φm), Apparent power(VA), Impedance permeability(µ;z), Complex permeability(µ',µ"), Loss coefficient(tanδ), Inductance(L), Resistance(R), Impedance(\|Z\|), Quality factor(Q), Total harmonic distortion(THD)
Waveformdisplay		B-H curve,Excitation current, Induced voltage, Magnetic field, Magnetic flux density
Testfrequency	Sinusoidal	10Hz to 10MHz（SY-8218） 10Hz to 1MHz（SY-8219）
Testfrequency	Square	10Hz to 1MHz（Duty50）
Magneticfield signal detection		Voltage drop at Non-inductive resister, Maximum currentat ±6A
Magnetic fluxdensity signal detection		Voltage detection at induced voltage detection coil, Maximum signal detection voltage at ±200V
Digitizer		16bits (8192points / cycle)
Sample connection method		2 or 1 coil (winding) method selectable
Display		8.4" TFT-LCD SVGA 800x600pixels
Power		AC100V to AC240V,50/60Hz, Approx. 130VA（MAX.）
Dimensions Weight		Approx. 420W x 266H x 480D(mm) Approx. 12.5kg
Externalmemory		USB port for data storage
Accessories		Referencesample, POD cover, AC coupler module, Power amplifier cable(BNC-BNC), OSC cable (SMA-BNC), Power cable, Operation manual(CD-ROM), Users guide

Các sản phẩm chung nhóm B-H Analyzers:

DC-bias test system:

SY-960 IWATSU VIỆT NAM

SY-961 IWATSU VIỆT NAM

SY-962 IWATSU VIỆT NAM

Power amplifier

HSA4101-IW IWATSU VIỆT NAM

HSA4014-IW IWATSU VIỆT NAM

IE-1125B IWATSU VIỆT NAM

SY-911 IWATSU VIỆT NAM

DC biasing source

SY-931 IWATSU VIỆT NAM

Temperature scanner system

SY-320A IWATSU VIỆT NAM

SY-321A IWATSU VIỆT NAM

SY-510 IWATSU VIỆT NAM

SY-511 IWATSU VIỆT NAM

SY-512 IWATSU VIỆT NAM

SY-910 IWATSU VIỆT NAM

SY-956 IWATSU VIỆT NAM

Single Sheet Test system

SY-509 IWATSU VIỆT NAM

The post B-H Analyzers, IWATSU VIỆT NAM appeared first on cuahangtudonghoa.com.

CS-3100 IWATSU Semiconductor Curve Tracer

cuahangtudonghoa — 2019-04-12 13:31:22

Công Ty TNHH TM và DV Tăng Minh Phát Là nhà phân phối chính hãng IWATSU tại Việt Nam

Semiconductor Curve Tracer CS-3000 Series

Standard models suitable for parameter measurement of various semiconductors including IGBTs, MOSFETs, transistors and diodes, etc..

Max. Peak Voltage : 3,000V（HV mode）
Max. Peak Current : 1,000A（HC mode）
Equipped all models with LEAKAGE mode (Cursor resolution 1pA）
USB port for display hardcopy, waveform data (CSV format) and measurement setup SAVE/RECALL
LAN interface for Remote Control

Các sản phẩm cùng chuyên mục:

品名	型番	測定項目
Semiconductor Curve Tracer CS-3100	CS-3100	HC mode not available
Semiconductor Curve Tracer CS-3200 / 3300	CS-3200	Max. Peak Voltage : 3,000V(HV mode) Max. Peak Current : 400A(HC mode)
Semiconductor Curve Tracer CS-3200 / 3300	CS-3300	Max. Peak Voltage : 3,000V(HV mode) Max. Peak Current : 1000A(HC mode)
Semiconductor Curve Tracer CS-5000 series	CS-5100	HC mode not available
	CS-5200	Max. Peak Voltage : 5,000V(HV mode) Max. Peak Current : 400A(HC mode)
	CS-5300	Max. Peak Voltage : 5,000V(HV mode) Max. Peak Current : 1,000A(HC mode)
	CS-5400	Max. Peak Voltage : 5,000V(HV mode) Max. Peak Current : 1,500A(HC mode)
Semiconductor Curve Tracer CS-10000 series	CS-10400	Max. Peak Voltage : 10,000V(HV mode) Max. Peak Current : 4,000A(HC mode)
	CS-10800	Max. Peak Voltage : 10,000V(HV mode) 　Max. Peak Current : 8,000A(HC mode)
	CS-12800	Max. Peak Voltage : 12,000V(HV mode) Max. Peak Current : 8,000A(HC mode)
	CS-15800	Max. Peak Voltage : 15,000V(HV mode) Max. Peak Current : 8,000A(HC mode)
10kV Semiconducto	－	Best suited for the measurement of high voltage diodes and thyristors

CS-3100 IWATSU VIỆT NAM

CS-3200 IWATSU VIỆT NAM

CS-3300 IWATSU VIỆT NAM

CS-5100 IWATSU VIỆT NAM

CS-5200 IWATSU VIỆT NAM

CS-5300 IWATSU VIỆT NAM

CS-5400 IWATSU VIỆT NAM

CS-10400 IWATSU VIỆT NAM

CS-10800 IWATSU VIỆT NAM

CS-12800 IWATSU VIỆT NAM

CS-15800 IWATSU VIỆT NAM

The post CS-3100 IWATSU Semiconductor Curve Tracer appeared first on cuahangtudonghoa.com.