VOAC7602 IWATSU VIỆT NAM

VOAC7523H IWATSU VIỆT NAM

VOAC7522H IWATSU VIỆT NAM

VOAC7521H IWATSU VIỆT NAM

VOAC7520H IWATSU VIỆT NAM

	Number of digits Full scale	DCV	CH-B DCV	ACV	W	DCA	ACA	Other functions
VOAC7602 IWATSU 1ch	61/2 1199999	0.1µV	-	0.1µV	0.1mW	1nA	1µA	Histogram / ​​ trend display  Therm./ Freq./ Math.
		100mV - 1000V	-	100mV - 750V	100Ω - 100MΩ	1mA - 3A	1A - 3A
VOAC7523H IWATSU 2ch	51/2 509999	0.1µV	100µV	1µV	0.1mW	10nA	10nA	Therm./ Freq./ Math.
		50mV - 1000V	5V - 300V	500mV - 750V	50W - 500MW	5mA - 10A	5mA - 10A
VOAC7522H IWATSU 1ch	51/2 509999	0.1µV	-	1µV	0.1mW (2W/4W)	10nA	10nA	Therm./ Freq./ Math.
		50mV - 1000V	-	500mV - 750V	50W - 500MW	5mA - 10A	5mA - 10A
VOAC7520H IWATSU 2ch	51/2 509999	1µV	100µV	1µV	0.1mW	10nA	10nA	Therm./ Freq./ Math.
		500mV - 1000V	5V - 300V	500mV - 750V	50W - 500MW	5mA - 10A	5mA - 10A
VOAC7521H IWATSU 1ch	51/2 509999	1µV	-	1µV	0.1mW (2W/4W)	10nA	10nA	Therm./ Freq./ Math.
		500mV - 1000V	-	500mV - 750V	50W - 500MW	5mA - 10A	5mA - 10A

Digital Multimeter VOAC7602

Digital Multimeters VOAC7523H / VOAC7522H / VOAC7520H / VOAC7521HSpecifications

*	Accuracy (±X% of reading +Y digits) indicated by X+Y
	The measuring accuracy indicated below can be obtained for a year following the calibration of the instrument.

1. Typical Sample Rate and Resolution
	Sample Rate Resolution Reading Rate Hum Rejection SLOW 5.5-digit approx. 4 times/sec Yes MID 5.5-digit approx. 20 times/sec Yes FAST 4.5-digit approx. 100 times/sec N/A

2. DC Volt (DCV)   50mV range is for the VOAC7523H / 7522H only.

Range Resolution Input Resistance Accuracy* 5.5-digit 4.5-digit SLOW/MID FAST 50mV 0.1µV 1µV 100MW or more 0.025+10 0.025+15 500mV 1µV 10µV 1000MW or more 0.012+5 0.012+10 5V 10µV 100µV 0.012+2 0.012+7 50V 100µV 1mV approx. 10MW 0.016+5 0.016+10 500V 1mV 10mV 0.016+2 0.016+7 1000V 10mV 100mV The accuracy in the 50mV and 500mV ranges is specified after zero compensation through the REL operation. Sample rate in the 50mV range SLOW/MID: Approx. 0.5 times/sec, FAST: Approx. 50 times/sec Max. input voltage: 50mV to 5V range ± 800V (continuous) 50V to 1000V range ± 1100V (continuous) Resolution and noise rejection Resolution Sample Rate NMRR CMRR 5.5-digit SLOW 55dB or more 120dB or more 5.5-digit MID 55dB or more 120dB or more 4.5-digit FAST 0dB 55dB or more

3. CH-B DC Volt (DCV)   VOAC7523H / 7520H only

Range Resolution Input Resistance Accuracy* 4.5-digit SLOW/MID FAST 5V 100µV CH-B:H to CH-B:L 10MW ± 3% CH-B:H to CH-A:L 5MW ± 3% CH-B:L to CH-A:L 5MW ± 3% 0.025+2 0.025+30 50V 1mV 0.025+8 300V 10mV 0.025+5 Max. input voltage: ± 300V, between CH-A L and CH-B ± 300V Resolution and noise rejection Resolution Sample Rate NMRR CMRR Isolation between CH-A and CH-B 4.5-digit SLOW/MID 55dB or more 120dB or more 56dB or more 4.5-digit FAST 0dB 55dB or more

4. AC Volt (ACV, DC+ACV) detection of True RMS      Up to 100kHz for VOAC7521H / 7520H

Range Resolution Measurement Range Input Resistance 5.5-digit SLOW MID/FAST 500mV 1µV 15Hz to 300kHz 200Hz to 300kHz less than approx. 1MW // 100pF 5V 10µV 50V 100µV 500V 1mV 45Hz to 100kHz 200Hz to 100kHz 750V 10mV 45Hz to 20kHz 200Hz to 20kHz Accuracy: SLOW Sample (Sine wave Amplitude at 5% to 100% of fullscale of range) Frequency Accuracy* 15Hz to 45Hz 0.5+150 45Hz to 100Hz 0.25+150 100Hz to 30kHz 0.2+150 30kHz to 100kHz 0.5+300 100kHz to 300kHz 2.5+1000 Coefficient to input other than sine wave Crest Factor Crest Factor 1 to 1.5 1.5 to 2 2 to 3 15Hz to 30kHz 0.05% 0.15% 0.30% 30kHz to 300kHz 0.20% - - Resnponse time Sample Rate Resolution Reading Rate Response Time SLOW 5.5-digit 4 times/sec less than 3 sec MID/FAST 5.5-digit 20 times/sec less than 2 sec Max. input voltage: 780Vrms, ± 1100V DC (continuous) In the case of DC+ACV, 500 (less than 45Hz) or 300 (45Hz or higher) must be added to the value of Accuracy digit in above. Sample rate of FAST becomes the same values as MID (approx. 20 times/sec).

5. DC Current (DCA)

Range Resolution Accuracy* Input Resistance 5.5-digit 4.5-digit SLOW/MID FAST 5mA 10nA 100nA 0.05+7 0.05+17 150W or less 50mA 100nA 1µA 15W or less 500mA 1µA 10µA 2W or less 10A 100µA 1mA 0.2+7 0.2+17 0.1W or less Auto range is not available between 5mA to 500mA range and 10A range because of using different input terminals. Max. input current: 500mA at 5mA to 500mA ranges (FUSE 0.5A/250V) 10A at 10A range (FUSE 15A/250V)

6. AC Current (ACA, DC+ACA)

Range Resolution Measurement Range Input Resistance 5.5-digit SLOW/MID FAST 5mA 10nA 15Hz to 5kHz 200Hz to 5kHz 150W or less 50mA 100nA 15W or less 500mA 1µA 45Hz to 5kHz 2W or less 10A 100µA 0.1W or less Accuracy: SLOW Sample (Sine wave) amplitude at 5% to 100% of fullscale (10% to 100% for10A range) Frequency Accuracy* Crest Factor 1 to 1.5 1.5 to 2 2 to 3 15Hz to 45Hz 1+200 0.05% 0.15% 0.30% 45Hz to 1kHz 0.4+200 1kHz to 5kHz 5.0+200 Response time Sample Rate Resolution Reading Range Response time SLOW 5.5-digit 4 times/sec less than 3 sec MID/FAST 5.5-digit 20 times/sec less than 2 sec Max. input current: 500mA for 5mA to 500mA ranges (FUSE 0.5A) 10A for 10A range (FUSE 15A) DC Component on input current must be included in the Max. input current. In the case of 10A range at 45Hz to 1kHz, 0.3 must be added to %. In the case of DC+ACA, 500 (less than 45Hz) or 300 (45Hz or higher) must be added to the value of Accuracy in above. Sample rate of FAST becomes the same value as MID (approx. 20 times/sec).

7. Resistance (2 WireW/4 WireW)   4 WireW: VOAC7522H / 7521H only

Range Resolution Accuracy* Test Current SLOW/MID FAST SLOW/MID FAST 50W 0.1mW 1mW 0.025+10 0.025+15 approx. 10mA 500W 1mW 10mW 0.014+3 0.014+8 approx. 10mA 5kW 10mW 0.1W approx. 1mA 50kW 0.1W 1W approx. 100µA 500kW 1W 10W 0.015+3 0.015+33 approx. 10µA 5MW 10W 10W 0.033+30 0.033+30 approx. 1µA 50MW 100W 100W 0.25+30 0.25+30 approx. 100nA 500MW 1kW 1kW 1.5+50 1.5+50 approx. 10nA Max. input voltage: ± 500V peak Open circuit test voltage: 12V or less The accuracy at 50W to 5kW range are specified after zero compensation through the REL operation. Sample rate of FAST at 5MW to 500MW range becomes the same value as MID (approx. 20 times/sec).

8. Low-Power Resistance (2 WireW)

Range Resolution Accuracy* Test Current SLOW/MID/FAST SLOW/MID FAST 500W 10mW 0.1+5 0.1+15 approx. 1mA 5kW 0.1W approx. 100µA 50kW 1W approx. 10µA 500kW 10W 0.2+30 0.2+40 approx. 1µA 5MW 100W 0.2+30 approx. 100nA 50MW 1kW 1.5+30 1.5+30 approx. 10nA Max. input voltage: ± 500V peak Open circuit test voltage: 12V or less The accuracy at 500W to 5kW range are specified after zero compensation through the REL operation. Sample rate of FAST at 5MW to 500MW range becomes the same value as MID (approx. 20 times/sec). Indications are in 4.5 digits for SLOW, MID, and FAST.

9. Diode
	Test Current Measurement Range Accuracy* Open Circuit Test Voltave Max. Input Voltave approx. 1mA or 10mA 0.1mV to 5.0999V 0.014+13 12V or less ± 500V peak

10. Temperature

Thermocouple Temperature Range to be Measured Accuracy* Resolution Max. Input Voltave R -50°C to 0°C 0.2+70 0.1°C ± 500V peak 0°C to +100°C 0.2+50 +100°C to +1768°C 0.2+30 K(CA) -200°C to -100°C 0.15+50 -100°C to 0°C 0.15+35 0°C to +1372°C 0.15+20 T(CC) -200°C to -100°C 0.15+50 -100°C to 0°C 0.15+35 0°C to +400°C 0.15+20 J(IC) -200°C to -100°C 0.15+50 -100°C to 0°C 0.15+35 0°C to +1200°C 0.15+20 E(CRC) -200°C to -100°C 0.15+50 -100°C to 0°C 0.15+35 0°C to +1000°C 0.15+20 The above accuracy values do not include the thermocouple accuracy. ±0.1°C/°C is added (for all thermocouples) with the operating ambient temperature of this product at 0°C to 18°C and 28°C to 50°C. accuracy is not specified. In the temperature range to be measured at -200°C or lower, The reference thermo electric force is calculated by the "broken line approximation" according to JIS C 1602-1995. If this product and the thermocouple are connected via a plug, an error for contact temperature compensation is added.

11. Frequency (AC couple, Crest Factor: less than 3)

Sample Rate Reading Rate (Gate time) Display Digits and Measurement Range Accuracy* SLOW approx. 0.5 times/sec (1s) 6-digit 15.0000Hz to 1.00000MHz 0.02+2 MID approx. 4 times/sec (100ms) 5-digit 15.000Hz to 1.0000MHz FAST approx. 10 times/sec (10ms) 4-digit 150.00Hz to 1.000MHz AC couple: Crest factor <=3 AUTO range of ACV must be used with input attenuator. Max. input voltage: 780 Vrms, ± 1100V peak

12. Chart for combination of Dual Function
	DCV CH-B DCV (*1) ACV DC+ ACV DCA ACA DC+ ACA 2 WireW 4 WireW(*2) Hz °C DCV CH-B DCV (*1) - ACV DC+ACV DCA ACA DC+ACA 2 WireW 4 WireW(*2) - Hz °C : Available : have a limitation : N/A - : not provided (*1) CH-B DCV: VOAC7523H / 7520H only (*2) 4 WireW: VOAC7522H / 7521H only

13. General

MATH Moving Average, Scale, Decibel (dBm, dBµ), Difference, Statistics (MAX, MIN, , s), Comparison (COMP), Arithmetic Calculation between Dual Function Memory DATA Max. 3000 data with 10 msec resolution time mark (Elapsed time) SET UP 10 Interfaces (Full Remote) Standard RS-232 Option LAN, GP-IB Power Supply Voltage AC100V, 110V, 220V, 240V Frequency 50Hz, 60Hz Power Consumption 21 VA (includes options) or less Operation Temperature and Humidity 0°C to +50°C (less than 80%RH) no condensation, 70%RH or less at +40°C to +50°C Storage Temperature and Humidity -20°C to +60°C (70%RH or less) no condensation, includes operation temperature Size Measurement 210W x 99H x 353L mm (Options are built into the main unit) Weight 3.5kg (includes options) or less Standard Accessories Fuse, Test Leads, Alignment Screwdriver, Operation Manual(CD-ROM), Power cord