Lapar Viet Nam | Đại Lý Phân phối Lapar Valve tại Việt Nam

LPB12 Triple Eccentric Metal Sealing Butterfly Valve

LPB13 High Performance Double Eccentric Butterfly Valve

The post LPB15 Fluorine Lined Butterfly Valve | Van bướm LPB15 Lapar Việt Nam appeared first on cuahangtudonghoa.com.

LPB14 High Performance Butterfly Valve | Van bướm LPB14 Lapar Việt Nam

cuahangtudonghoa — 2019-08-13 16:53:25

Công Ty TNHH TM và DV Tăng Minh Phát chuyên cung cấp Butterfly Valve Lapar tại Việt Nam

Data Sheet LPB114

Van bướm LPB14 Lapar

1. Mô tả LPB14 Butterfly Valve Lapar

Horizontal pin: Reduce the exploding possibility of stem effectively under the internal unbearable pressure.
Disc: There is no stem through disc completely for less resistance and more flow capacity.
Stem: The design of two section of stem, can enhance the stability and resistance of disc effectively.
Guide bearing: It is made by nylon and can ensure that the shaft rotate in absolute center,to decrease friction and torque.
The seat with backrest: It is consisted of inner backrest and outer rubber.the backrest can withstand the deformation of seat when it is scoured and squeezed to extend service life.

2. Tiêu chuẩn Van bướm LPB14 Lapar

Tight sealing and zero leakage under rated pressure(1.0Mpa~1.6Mpa).
Multi-sealing design separates valve body from working medium to ensure zero leakage.
Main parts are designed to fit exactly into each other to ensure a better sealing, smaller torque, bigger flow, lower fluid resistance as well as flexible two-side flow.
Scientific design for the sealing surface of valve seat makes a closed connection between the valve and the pipe flange without any additional ccessories.
Designed and produced based on multi-standard system, so the valve could be applied to various of flange and enjoy excellent interchangability.
All parts are embalmed, suitable for various complex work environment.
Others: According to customer requirements.

3. Đặc tính kỹ thuật LPB14 Butterfly Valve Lapar

Actuator	Electric, Pneumatic, Turbine, Handle
Control	On-off, Modulating, Inteligent
DN	50~1200mm
Pressure	150~300Lbs
Temperature	EPDM: -29~120°C, FPM: -29~150°C
	PTFE: -29~150°C, CR: -29~80°C
	NBR: -29~80°C, SI: -29~200°C
Connection	Wafer
Structure	A Type, LT Type
Body Material	SS304L, WCB, Casting Iron, Ductile Iron
Disc Material	SS316L, SS316, SS304, Casting Iron, Casting Iron+Nylon11
Disc Material	B148, FEP (Casting Iron+F46)
Seat Material	NBR, EPDM, PTFE, FPM, CR, SI
Medium	Gas, Water, Oil
Option	Limit Switch, Positioner, Solenoid Valve, Pressure-relief Valve

Pneumatic High Performance Butterfly Valve

LPB12 Triple Eccentric Metal Sealing Butterfly Valve

LPB13 High Performance Double Eccentric Butterfly Valve

Xem thêm Butterfly valve Papar

The post LPB14 High Performance Butterfly Valve | Van bướm LPB14 Lapar Việt Nam appeared first on cuahangtudonghoa.com.

LPB13 Double Eccentric Butterfly Valve Lapar | Van bướm đôi LPB13 Lapar

cuahangtudonghoa — 2019-08-13 15:51:29

Công Ty TNHH TM và DV Tăng Minh Phát chuyên cung cấp Butterfly Valve Lapar tại Việt Nam

LPB13 Double Eccentric Butterfly Valve Lapar

1. Đặc điểm thiết kế van bướm LPB13 Lapar

Life of up to one million times
Good sealing performance, easy to replace
Valve pressure rating 740 psi, Maximum operating temperature 400°F at 100 psi, Lug style, Glass reinforced PTFE seats, Blowout proof stem, Stainless steel disc and stem, Integrally cast disc stop, Dual offset design, Direct mount actuation, Operating mechanism: Bare stem, infinite position plate and lock, lever lock, manual gear operator and pneumatic/electric automation
MSS SP-68 (design) 100% production tested, MSS SP-25 (markings), API 609 seat pressure/temperature ratings/blow-out proof stem, ASME/ANSI B16.34A, body pressure/temperature ratings, ASME/ANSI B16.5 flange dimensions, ISO 5211 EN 12116 actuator mounting top works, ANSI Class 300

2. Thông số kỹ thuật LPB13 Butterfly Valve Lapar

Actuator	Electric, Pneumatic, Turbine, Handle
Control	On-off, Modulating, Inteligent
DN	50~1200mm
Pressure	150~300Lbs
Temperature	PTFE: -29~150°C
Temperature	Graphite: -40~425°C
Connection	Flange, Wafer, Lug
Structure	Double eccentric
Body Material	SS316, SS304, WCB
Disc Material	SS316, SS304, WCB
Seat Material	PTFE, Graphite
Medium	Gas, Water, Oil (High temperature applications)
Option	Limit Switch, Positioner, Solenoid Valve, Pressure-relief Valve

LPB13 High Performance Double Eccentric Butterfly Valve

LPB12 Triple Eccentric Metal Sealing Butterfly Valve

LPB13 High Performance Double Eccentric Butterfly Valve

The post LPB13 Double Eccentric Butterfly Valve Lapar | Van bướm đôi LPB13 Lapar appeared first on cuahangtudonghoa.com.

LPB12 Butterfly Valve Lapar | Van bướm LPB12 Lapar Việt Nam

cuahangtudonghoa — 2019-08-13 08:40:09

Công Ty TNHH TM và DV Tăng Minh Phát chuyên cung cấp Butterfly Valve Lapar tại Việt Nam

Data Sheet LPB12 Lapar

LPB12 Butterfly Valve Lapar

1. Tính năng van bướm LPB12 Lapar

Medium can flow through the body directly for little resistance and high flow capacity.
The body and upper cover could be made of carbon steel,austenitic stainless steel or special alloy material.
The sulfur-free flexible v-graphite is heat resisting,we shall ensure the service life of packing is long-term without maintenance by increasing pre-pressure on spring gasket.
The self-sealing packing structure is tested 100,000 times (full travel) to ensure zero leakage and constant friction.When the stem moves at low friction state,we can get the long-term steady precision of control valve .
The seat adopts multi-level structure, the sealing surface is composed of metal and special non-metal materials to ensure zero leakage.
The shaft center deviates from the valve center bi-directionally. The asymmetric design sealing surface allows the disc to revolve in 0-90° freely.
Triple offset with metal seat design.

2. Thông số kỹ thuật LPB12 Butterfly Valve Lapar

Actuator	Electric, Pneumatic, Handwheel, Handle
Actuator	Electric, Pneumatic, Handwheel, Handle
Control	On-off, Modulating, Inteligent
DN	50~1000mm
Pressure	1.6~6.4Mpa
Temperature	Body, STL (Stellite alloys) -40~425°C
Connection	Flange, Wafer
Structure	Three Eccentric (Triple offset)
Body Material	SS316L, SS316, SS304, SS304L, WCB, CE3MN
Disc Material	SS316L, SS316, SS304, SS304L, WCB, CE3MN
Seat Material	Body, STL (Stellite alloys)
Medium	Gas, Water, Oil and Liquid (High temperature applications)
Option	Limit Switch, Positioner, Solenoid Valve, Pressure-relief Valve

Butterfly Valve LPB12 Lapar

LPB12 Triple Eccentric Metal Sealing Butterfly Valve

LPB13 High Performance Double Eccentric Butterfly Valve

Butterfly Valve LPB11 Lapar

The post LPB12 Butterfly Valve Lapar | Van bướm LPB12 Lapar Việt Nam appeared first on cuahangtudonghoa.com.

Butterfly Valve LPB11 Lapar | Van bướm LPB11 Lapar

cuahangtudonghoa — 2019-08-12 20:54:28

Công Ty TNHH TM và DV Tăng Minh Phát chuyên cung cấp Butterfly Valve Lapar tại Việt Nam

Data Sheet LPB11 Lapar

LPB11 Rubber Seat Butterfly Valve

1. Đặc điểm, tính năng van bướm LPB11 Lapar

Optional multi-pressure stage
Special design will not cause death card
Torque and lighter, easy to replace the seat
Unique shape
Frame structure
Coated disc

2. Thông số kỹ thuật Butterfly Valve LPB11 Lapar

Actuator	Electric, Pneumatic, Handwheel, Handle
Actuator	Electric, Pneumatic, Handwheel, Handle
Control	On-off, Modulating, Inteligent
DN	40~1200mm
Pressure	1.0~2.5Mpa
Temperature	EPDM: -29~120°C, FPM: -29~150°C
	EPT: -20~140°C, CR: -29~80°C
	NBR: -29~80°C, SI: -29~200°C
Connection	Flange, Wafer
Structure	A Type, LT Type
Body Material	SS316L, SS316, SS304, SS304L, WCB, Casting Iron, Ductile Iron
Disc Material	SS316L, SS316, SS304L, Casting Iron, WCB, B148, Ductile Iron+Nylon 11, CE3MN
Seat Material	NBR, EPDM, EPT, FPM, CR, SI
Medium	Water, Liquid
Option	Limit Switch, Positioner, Solenoid Valve, Pressure-relief Valve

Lug type ELectric Actuated Butterfly Valve

Wafer ELectric Actuated Butterfly Valve

LPB12 Triple Eccentric Metal Sealing Butterfly Valve

LPB13 High Performance Double Eccentric Butterfly Valve