Van bướm LPB14 Lapar
1. Mô tả LPB14 Butterfly Valve Lapar
- Horizontal pin: Reduce the exploding possibility of stem effectively under the internal unbearable pressure.
- Disc: There is no stem through disc completely for less resistance and more flow capacity.
- Stem: The design of two section of stem, can enhance the stability and resistance of disc effectively.
- Guide bearing: It is made by nylon and can ensure that the shaft rotate in absolute center,to decrease friction and torque.
- The seat with backrest: It is consisted of inner backrest and outer rubber.the backrest can withstand the deformation of seat when it is scoured and squeezed to extend service life.
2. Tiêu chuẩn Van bướm LPB14 Lapar
- Tight sealing and zero leakage under rated pressure(1.0Mpa~1.6Mpa).
- Multi-sealing design separates valve body from working medium to ensure zero leakage.
- Main parts are designed to fit exactly into each other to ensure a better sealing, smaller torque, bigger flow, lower fluid resistance as well as flexible two-side flow.
- Scientific design for the sealing surface of valve seat makes a closed connection between the valve and the pipe flange without any additional ccessories.
- Designed and produced based on multi-standard system, so the valve could be applied to various of flange and enjoy excellent interchangability.
- All parts are embalmed, suitable for various complex work environment.
- Others: According to customer requirements.
3. Đặc tính kỹ thuật LPB14 Butterfly Valve Lapar
|Actuator||Electric, Pneumatic, Turbine, Handle|
|Control||On-off, Modulating, Inteligent|
|Temperature||EPDM: -29~120°C, FPM: -29~150°C|
|PTFE: -29~150°C, CR: -29~80°C|
|NBR: -29~80°C, SI: -29~200°C|
|Structure||A Type, LT Type|
|Body Material||SS304L, WCB, Casting Iron, Ductile Iron|
|Disc Material||SS316L, SS316, SS304, Casting Iron, Casting Iron+Nylon11|
|B148, FEP (Casting Iron+F46)|
|Seat Material||NBR, EPDM, PTFE, FPM, CR, SI|
|Medium||Gas, Water, Oil|
|Option||Limit Switch, Positioner, Solenoid Valve, Pressure-relief Valve|
Pneumatic High Performance Butterfly Valve