Cảm biến Schenck process Việt Nam

cuahangtudonghoa — 2019-10-11 13:52:48

Công Ty TNHH TM và DV Tăng Minh Phát chuyên cung cấp các thiết bị hãng Schenck process tại Việt Nam.

CONiQ® Condition Monitoring for Screens, Feeders and their Exciters

CONiQ Parts
Floor Unit VWG 25000 for each screen	V535650.B01
Processing Unit VCU 25010
Operator Panel VOP 25000

Top Screen Unit VME 25010 for each exciter	V535500.B01
Measuring hardware
Radio transmission hardware
Adapter plate
Piezoelectric accelerometer with cable	V607061.B01
Temperature sensor M16	V585380.B03
Temperature sensor M24	V585380.B04
Cable for temperature sensor	V585380.B05
System cable Top Screen Unit	V606057.B52
1 Mounting plate to fix the VME 25010 and cables
DF4xx	V535540.B02
DF5xx	V535541.B02
DF6xx	V535542.B02
DF7xx	V535543.B02
2 Cable ducts
DF4xx	V535544.B02
DF5xx	V535545.B02
DF6xx	V535546.B02
DF7xx	V535547.B02 and V535547.B52

CONiQ View PC program VPC 25000
Optional boards for industrial fieldbus:
PROFIBUS DP (VPB8020)	V081901.B01
DeviceNet (VCB8020)	V081903.B01
Serial Modbus (VSS8020)	V081902.B01
PROFINET (VPN8020)	V097103.B01

MULTISTREAM® G Solids Flow Meter

Variant	Order No.
MULTISTREAM® G, Solids Flow Meter
G 400, max. 400 m³/h	F021140.01
G 750, max. 750 m³/h	F021140.02
G 1250, max. 1250 m³/h	F021140.03

MULTISTREAM® B Solids Flow Meter

Variant	Order No.
MULTISTREAM B80, Solids Flow Meter, max. 80 m³/h	F018320.01

ProFlex® C500 / C3000 / C6000 Volumetric Feeder

Installation Size		C500C3000 C6000
Max. feed rate		759 dm³/h3891 dm³/h 9463 dm³/h
Adjustment range		1 : 201 : 20 1 : 20
Available discharge unit diameters	Single helix Single screw	19 / 25 / 35 / 44 mm35 / 44 / 57 / 76 mm 57 / 76 / 89 / 102 mm
	Twin shaft	22 mm- -
Discharge length from center of feeder		350 / 500 mm450 / 650 mm 600 / 800 mm
Extension hopper		50 dm³100 / 150 dm³ 200/400 dm³
Feed Hopper		EPDM / 20 dm³PUR / 60 dm³ PUR / 100 dm³
Weight, empty		about 70 kgca. 170 kg about 220 kg
Motor protection class		IP55
Connection voltage		230/400 VAC 3-phase (110/230 VAC 1-phase on request)
Ambient temperature		-20 °C … +50 °C
Bulk solids temperature		-30 °C … +50 °C (higher available on request)
Bulk material density		0.3 … 1.2 kg/dm³ (higher available on request)
Grain size		up to 5 mm
Flow properties		free flowing to slightly sluggish
Components in contact with the bulk material		Stainless steel 1.4301

Volumetric Feeders, AccuRate Series:

AccuRate Feeders – Series 300
AccuRate Feeders – Series 600
AccuRate Feeders – Series 900

Measuring Eye, DMA Type

Variants	Ordering No.
DMA-V Measuring eye with strain gauge full bridge	D 705 336.01
DMA-V-Ex (intrinsically safe) II 2G Ex ib IIC T6 Gb Measuring eye with strain gauge full bridge for use in ATEX/IECEx	D 724 987.02
DMA-V-Ex (not intrinsically safe) II 3G Ex nA IIC T6 Gc and II 2D Ex tb IIIC T85 °C Db Measuring eye with strain gauge full bridge for use in ATEX/IECEx	D 724 987.03
DMA-V-ÜS Measuring eye with strain gauge full bridge for use in railway tracks	D 705 336.08
DMA-V-ÜS-Ex (intrinsically safe) II 2G Ex ib IIC T6 Gb Measuring eye with strain gauge full bridge for use in ATEX/IECEx and overvoltage protection	D 724 987.10
DMA-V-ÜS-Ex (not intrinsically safe) II 3G Ex nA IIC T6 Gc and II 2D Ex tb IIIC T85 °C Db Measuring eye with strain gauge full bridge for use in ATEX/IECEx and overvoltage protection	D 724 987.11
DMA-H Measuring eye with strain gauge half bridge	D 705 226.01
DMA-H-Ex (intrinsically safe) II 2G Ex ib IIC T6 Gb Measuring eye with strain gauge half bridge for use in ATEX/IECEx	D 724 988.01
DMA-H-Ex (not intrinsically safe) II 3G Ex nA IIC T6 Gc and II 2D Ex tb IIIC T85 °C Db Measuring eye with strain gauge half bridge for use in ATEX/IECEx	D 724 988.03
DMA-V, 0.1 mm oversize Spare part for exchanged DMA-V	V030174.B01
DMA-V-ÜS for MULTIRAIL, 0.1 mm oversize Spare part for exchanged DMA-V-ÜS	V030174.B03
DMA-H, 0.1 mm oversize Spare part for exchanged DMA-H	V030174.B02
DMA-V-Ex, 0.1 mm oversize (intrinsically safe) II 2G Ex ib IIC T6 Gb Spare part for exchanged DMA-V-Ex	V030174.B04
DMA-V-Ex, 0.1 mm oversize (not intrinsically safe) II 3G Ex nA IIC T6 Gc and II 2D Ex tb IIIC T85 °C Db Spare part for exchanged DMA-V-Ex	V030174.B05
Mounting kit for pressing-in measuring eyes	D 705 046.01
Suitable for junction box, refer to data sheet BV-D2121
Closing device to protect measuring eyes against mechanical damage (not for type DMA-V-ÜS)	D 705 968.01
Manual DKI 206 DE, German Manual DKI 206 GB, English Manual DKI 206 FR, French Manual DKI 206 RU, Russian	D 707 200.01 D 707 204.01 D 707 200.02

SENSiQ® Weighbeam WB 40 t … 600 t

Design	Order number with straight plug outlet	Order number with lateral plug outlet on the right
WB 40 t	V711375.B03	V758596.B01
WB 50 t	V711375.B13	V758596.B11
WB 100 t	V711375.B23	V758596.B21
WB 150 t	V711375.B33	V758596.B31
WB 200 t	V711375.B43	V758596.B41
WB 600 t	V711375.B53	V758596.B51

Weighbeam DWB 11.5 ... 25t

Variants	Order No.
DWB 11.5 t	D 703 100.01
DWB 15 t	D 703 100.02
DWB 25 t	D 704 280.03
DWB 11.5 t HT	D 703 100.04
DWB 25 t HT	D 704 280.05

VDW Self-Centering Pressure Load Cell

Design	Material number
VDW 33t, C3 without mounting parts	V080434.B01
VDW 44t, C3 without mounting parts	V080434.B02
Set of mounting parts (2 thrust pieces) for load cell VDW	V080494.B01

Load Cells VBB and Load Cell Mounts VEB

Variants Load Cells	Order No.	Ex-Variants Load CellsOrder No. 2GD Order No. 2D/3G
VBB 5 kg D1	D 725 417.01
VBB 10 kg D1	D 725 417.02
VBB 10 kg СЗ	D 725 419.02	VBB 10 kg СЗ „Ex"D 725 419.32 D 725 419.42
VBB 20 kg D1	D 725 417.03
VBB 20 kg C3	D 725 419.03	VBB 20 kg C3 „Ex"D 725 419.33 D 725 419.43
VBB 50 kg D1	D 725 417.04
VBB 50 kg C3	D 725 419.04	VBB 50 kg C3 „Ex"D 725 419.34 D 725 419.44
VBB 0.1 t D1	D 725 409.01	VBB 0,1 t D1 „Ex"D 725 409.61 D 725 409.41
VBB 0.1 t C3	D 725 409.04	VBB 0,1 t C3 „Ex"D 725 409.64 D 725 409.44
VBB 0.1 t C4	D 726 370.01	VBB 0,1 t C4 „Ex"D 726 370.31 D 726 370.41
VBB 0.2 t D1	D 725 409.02	VBB 0,2 t D1 „Ex"D 725 409.62 D 725 409.42
VBB 0.2 t C3	D 725 409.05	VBB 0,2 t C3 „Ex"D 725 409.65 D 725 409.45
VBB 0.2 t C4	D 726 370.02	VBB 0,2 t C4 „Ex"D 726 370.32 D 726 370.42
VBB 0.2 t C6	D 726 370.04	VBB 0,2 t C6 „Ex"D 726 370.34 D 726 370.44
VBB 0.5 t D1	D 725 409.03	VBB 0,5 t D1 „Ex"D 725 409.63 D 725 409.43
VBB 0.5 t C3	D 725 409.06	VBB 0,5 t C3 „Ex"D 725 409.66 D 725 409.46
VBB 0.5 t C4	D 726 370.03	VBB 0,5 t C4 „Ex"D 726 370.33 D 726 370.43

RTN 1 t	D726173.04	D726173.02	D726173.10
RTN 2.2 t	D726174.04	D726174.02	D726174.10
RTN 4.7 t	D726175.04	D726175.02	D726175.10
RTN 10 t	D726176.04	D726176.02	D726176.10
RTN 15 t	D726177.04	D726177.02	D726177.10
RTN 22 t	D724781.04	D724781.02	D724781.10
RTN 33 t	D724754.04	D724754.02	D724754.10
RTN 47 t	D724782.04	D724782.02	D724782.10
RTN 68 t	D724783.04	D724783.02	D724783.10
RTN 100 t	D724784.04	D724784.02	D724784.10
RTN 150 t	D726178.04	D726178.02
RTN 220 t	D726179.04	D726179.02
RTN 330 t	D726180.04	D726180.02
RTN 470 t	D726181.04	D726181.02

RTB Ring torsion load cell

Design	Accuracy class
[t]	C3C5
0.13	V041085.B01—
0.25	V041086.B01—
0.50	V041087.B01V041087.B05
0.25 MR	V041086.B07—
0.50 MR	V041087.B07—
Order numbers model ATEX/IECEX II 1G Ex ia IIC T4 Ga/ II 1D Ex ia IIIC T73°C Da/ II 3G Ex nA IIC T4 Gc/ II 3D Ex tc IIIC T63°C DC*
0.13	V041085.B11—
0.25	V041086.B11—
0.50	V041087.B11V041087.B15

Type	Material number
SEM 1 t … 4.7 t	D733119.01
SEM 10 t … 22 t	D733119.02
SEM 33 t	D733119.03
SEM 47 t	V081425.B01
SEM 68 t	V081425.B02
SEM 100 t	V081425.B03
SEM 150 t	V081425.B04
SEM 220 t	V081425.B05
SEM 330 t	V081425.B06
SEM 470 t	V081425.B07
SSM 1 t … 4.7 t	V020696.B01
SSM 10 t … 22 t	V020696.B02
SSM 33 t	V020696.B05
SSM 47 t	V024275.B01

Type	Material number
SEM / SSM 1 t … 4.7 t	D733120.06
SEM / SSM 1 t … 4.7 t	D733120.01
SEM / SSM 10 t … 22 t	D733120.04
SEM / SSM 10 t … 22 t	D733120.02
SEM / SSM 33 t	D733120.03

Variants	Order number
10 t … 22 t	V554135.B02
33 t	V554136.B02
47 t	V554137.B02
68 t	V554138.B02
100 t	V554139.B02
150 t	V554140.B02
220 t	V554141.B02
330 t	V554142.B02

V021894.B02	V021894.B01
V021837.B02	V021837.B01
V021776.B02	V021776.B01
V021995.B02	V021995.B01
V021974.B02	V021974.B01
V021777.B02	V021777.B01
V022583.B02	V022583.B01
V022592.B02	V022592.B01
V038093.B03	V038093.B07
V049185.B02	V049185.B04

Variants Load Cells	Order No.	Ex-Variants Load Cells	Order No. 2GD	Order No. 2D/3G

VBB 5 kg D1	D 725 417.01
VBB 10 kg D1	D 725 417.02
VBB 10 kg СЗ	D 725 419.02	VBB 10 kg СЗ „Ex"	D 725 419.32	D 725 419.42
VBB 20 kg D1	D 725 417.03
VBB 20 kg C3	D 725 419.03	VBB 20 kg C3 „Ex"	D 725 419.33	D 725 419.43
VBB 50 kg D1	D 725 417.04
VBB 50 kg C3	D 725 419.04	VBB 50 kg C3 „Ex"	D 725 419.34	D 725 419.44
VBB 0.1 t D1	D 725 409.01	VBB 0,1 t D1 „Ex"	D 725 409.61	D 725 409.41
VBB 0.1 t C3	D 725 409.04	VBB 0,1 t C3 „Ex"	D 725 409.64	D 725 409.44
VBB 0.1 t C4	D 726 370.01	VBB 0,1 t C4 „Ex"	D 726 370.31	D 726 370.41
VBB 0.2 t D1	D 725 409.02	VBB 0,2 t D1 „Ex"	D 725 409.62	D 725 409.42
VBB 0.2 t C3	D 725 409.05	VBB 0,2 t C3 „Ex"	D 725 409.65	D 725 409.45
VBB 0.2 t C4	D 726 370.02	VBB 0,2 t C4 „Ex"	D 726 370.32	D 726 370.42
VBB 0.2 t C6	D 726 370.04	VBB 0,2 t C6 „Ex"	D 726 370.34	D 726 370.44
VBB 0.5 t D1	D 725 409.03	VBB 0,5 t D1 „Ex"	D 725 409.63	D 725 409.43
VBB 0.5 t C3	D 725 409.06	VBB 0,5 t C3 „Ex"	D 725 409.66	D 725 409.46
VBB 0.5 t C4	D 726 370.03	VBB 0,5 t C4 „Ex"	D 726 370.33	D 726 370.43

Variants	Order number without base plate	Order number with base plate	Variants	Order number without base plate	Order number with base plate
SPM 1 t	D 725565.16	D 725565.11	SPM 47 t	D 725565.08	D 725565.03
SPM 2.2 t	D 725565.17	D 725565.12	SPM 68 t	D 725565.09	D 725565.04
SPM 4.7 t	D 725565.18	D 725565.13	SPM 100 t	D 725565.10	D 725565.05
SPM 10 t	D 725565.19	D 725565.14	SPM 150 t		D 726616.01
SPM 15 t	D 725565.20	D 725565.15	SPM 220 t		D 726616.02
SPM 22 t	D 725565.06	D 725565.01	SPM 330 t		D 726616.03
SPM 33 t	D 725565.07	D 725565.02	SPM 470 t		D 726616.04

Variants	Order Number	Order Number
10 t … 22 t	V555055.B03	V555055.B02
33 t	V555063.B03	V555063.B02
47 t	V554145.B03	V554145.B02
68 t	V554775.B03	V554775.B02
100 t	V554152.B03	V554152.B02
150 t	V555070.B03	V555070.B02
220 t	V555077.B03	V555077.B02
330 t	V555085.B03	V555085.B02

Variants	Order Number
0.25 t	V041091.B01
0.50 t	V041092.B01
1 … 2.2 t	D 731186.01
4.7 t	D 731186.02
10 … 22 t	D 731353.01
33 t	D 731415.01
47 t	V654503.B01
68 t	V654503.B11
100 t	V654503.B21
150 t	V654503.B31
220 t	V654503.B41
330 t	V654503.B51
470 t	V654503.B61

V041386.B01	SEM 33	D 725575.02
V041387.B01	SEM 47	D 725575.03
D 726185.01	SEM 68	D 725575.04
D 726185.01	SEM 100	D 725575.05
D 726185.02	SEM 150	D 726186.01
D 725575.10	SEM 220	D 726186.02
*D 725575.11)**	SEM 330	D 726186.03

Multi-Idler Belt Weigher Variants

BMP 500 - 2000
Belt weigher with weighing platform, IEC belt widths from
500 to 2000 mm

2 BMP 500 - 1400
Belt weigher with weighing platform, IEC belt widths from
500 to 1400 mm

BMC 500 - 2000
Belt weigher with weighing platform, IEC belt widths from 500 to 2000 mm

Single-Idler Belt Weigher Variants

BEM 400 - 1400
Belt weigher of modular design, belt widths from 400 - 1400 mm

BEP 400 - 1400
Belt weigher with weighing platform, IEC-belt widths from
400 - 1400 mm

BED 1600 - 2000
Belt weigher with weighing platform, IEC-belt widths from
1600 - 2000 mm

V020538.B01	V068044.B01
V020538.B02
V020538.B03
V020538.B04	V068044.B04
V020538.B05	V068044.B05
V020538.B06	V068044.B06
V020538.B07	V068044.B07
V020538.B08	V068044.B08
V020538.B09	V068044.B09
V020538.B10	V068044.B10
V020538.B11	V068044.B11
V020538.B12	V068044.B12
V020538.B13	V068044.B13

V020546.B01

V020546.B02

V020546.B03

V020546.B04

V020546.B05

V020546.B06

V020546.B07

V020546.B08

V020546.B09

V020546.B10

V020546.B11

V020546.B12

V020546.B13

V020567.B01

V020567.B02

V020567.B03

V020567.B04

V020567.B05

V020567.B06

V020575.B01

V020575.B02

V020575.B03

V020575.B04

V020575.B05

V020575.B06

V020576.B01

V020577.B01

Equipment Supplied	Type	Material Nr.
Basic Units
DISOBOX base unit,A/D converter unit with8 measuring channels	VME 21080	V081000.B01
DISOBOX base unit, A/D converter unit with4 measuring channels	VME 21040	V081001.B01
DISOBOX, A/D converter unitwith 8 measuring channels for ATEX category 3D	VME 21080-3D	V081100.B01
DISOBOX, A/D converter unitwith 4 measuring channels for ATEX category 3D	VME 21040-3D	V081101.B01
DISOBOX, A/D converter unitwith 8 measuring channels for ATEX category 2D	VME 21080-2D	V081102.B01
DISOBOX basic unit,A/D converter unit with8 measuring channels and overvoltage protection for theload cell connections	VME 21081	V081003.B01
DISOBOX basic unit, A/D converter unit with4 measuring channels andovervoltage protection for the load cell connections	VME 21041	V081004.B01
DISOBOX basic unit,A/D converter unit with8 measuring channels, stainless steel housing	VME 21084	V081005.B01
DISOBOX basic unit,A/D converter unit with4 measuring channels, stainless steel housing	VME 21044	V081006.B01
Bus Cards
Optional PROFIBUS,mounted and wired	VPB 28020	V081904.B01
Optional PROFINET,mounted and wired	VPN 28020	V533496.B01
Optional DeviceNet,mounted and wired	VCB 28020	V081906.B01
Optional interface expansion,mounted and wired	VSS 28020	V081905.B01
Analog I/O
Analog Input	VAI 20100	V078800.B01
Analog Output 0 - 20 mA,max. 11 V	VAO 20100	V078801.B01
Analog Output 0 - 10 V,max. 50 mA	VAO 20101	V078802.B01
Accessories
Power supply unit/	VNT 20410	V028209.B01
Load cell simulator,8 channel	VWZ 21000	V081029.B01
DISOPLAN	VPL 20430	V029764.B01
Grounding angle for fitting thePEL connections of the load cells		V035403.B01

Variant	Ordering Nr.
DISOMAT Opus Maxi, VKG 20700 Zeus, Stainless steel unit IP65 for desk-top or wall instal- lation with an activated Zeus 'road weigh bridge' application package, remote keyboard, printer cable and operating manual.	V040081.B01 (de) V040081.B02 (gb)
DISOMAT Opus Maxi, VKG 20700 Zeus, as above, but with VMM 20700 legal-for-trade memory, no printer cable.	V040080.B01 (de) V040080.B02 (gb)
Activation for Zeus 'road weigh bridge' application package.	V040079.B01

V040000.B11	DISOMAT Opus maxi, VKG 20700, Stainless steel unit IP65
V040001.B11	DISOMAT Opus mini, VKG 20710, Stainless steel unit IP65
V040003.B11	DISOMAT Opus maxi, VKG 20740, Stainless steel unit IP65, 24 VDC supply
V040002.B01	DISOMAT Opus top-hat rail unit, VEG 20720
V063320.B01	DISOMAT Opus, Panel installation unit VEG 20700
V063321.B01	DISOMAT Opus, Panel installation unit VEG 20750, 24 VDC supply
V081990.B01	DISOMAT Opus maxi, stainless steel unit for ATEX category 3D, main supply
V095580.B01	DISOMAT Opus maxi, stainless steel unit for ATEX category 3D, 24 VDC supply
V535499.B01	PROFINET kit, VPN 28020 for VKG
V054033.B01	PROFIBUS DP kit, VPB 28020 for VKG
V081906.B01	DeviceNet kit, VCB 28020 for VKG
V081908.B01	PROFIBUS DP kit, VPB 28020 for VEG 20700
V081909.B01	DeviceNet kit, VCB 28020 for VEG 20700
V064721.B06	Procedure EtherNet/IP
V040045.B01	Remote PC keyboard (USB), German key assignment
V040045.B02	Remote PC keyboard (USB), English key assignment
V040026.B01	Legal-for-trade memory VMM 20407
V052188.B01	DISOMAT Satus VSE 20900 circuit board incl. front plate
V052188.B02	DISOMAT Satus VSE 20901 circuit board incl. front plate; with mounted PROFIBUS option
V053903.B01	DISOMAT Satus VSE 20910 circuit board incl. front plate, with integrated LED weight display
V055346.B01	VNG0900 19" rack
V053978.B01	Power supply unit VNT 20901 230 VAC, for up to 9 VSE 209xx
V068489.B01	VXB 20901 safety barriers for RTN/RTB/VBB/PWS load cells in potentially hazardous area of ATEX category 2G
V068493.B01	VXB 20911 safety barrier for RTK/DMA weigh cells
V053917.B02	PROFIBUS installation set for DISOMAT SATUS
V053918.B02	DeviceNet Satus installation set
V029764.B01	DISOPLAN VPL 20430 configuration software
Type	Material nummer

VSS 28020	V081902.B01
VPB 28020	V081901.B01
VCB 28020	V081903.B01
VET 20700	V040035.B01
VPN 28020	V097103.B01

VNT0650	V082050.B01
VEA 20451	V054098.B01
	V082039.B01

VPC 20150	E144541.01

VLD 20100	V090252.B01
VLZ 20045	V067304.B01
VLZ 20100	V066611.B01
Design	Material Number
VOP 28090 ATEX 2GD display and operating unit, front-of-panel unit, stainless steel, 24 VDC	V097000.B01
Keyboard VTT 28090 ATEX 2GD	V097001.B01
VFG 28090 ATEX 2GD display and operating unit field device, stainless steel, incl. VOP 28090 and VTT 28090	V559477.B01
Design	Material Number
VOP 28000 display and operating unit, front-of-panel unit, plastic front frame, 24 VDC	V078510.B01
VOP 28030 display and operating unit, front-of-panel unit, plastic front frame, 85 … 264 VAC	V078513.B01
VOP 28010 display and operating unit, hand-held unit (mobile version), plastic housing, 24 VDC	V078511.B01
VOP 28040 display and operating unit, desktop or wall-mounted, incl. wall bracket, stainless steel housing, 85 … 264 VAC	V078514.B01
VOP 28040-3D display and operating unit, ATEX category 3D (Zone 22), desktop or wall-mounted, incl. wall bracket, stainless steel housing, 85 … 264 VAC	V078529.B01
Keyboard VTT 28000	V081929.B01
VFG 28000 display and operating unit, field unit, stainless steel, incl. VOP 28000, VTT 28000 and 7 operating buttons	V577415.B01
VFG 28000 display and operating unit, field unit, stainless steel, incl. VOP 28030, VTT 28000 and 7 operating buttons	On request

The post Cảm biến Schenck process Việt Nam appeared first on cuahangtudonghoa.com.

Load Cell Schenck process | Cảm biến trọng lượng Schenck process

cuahangtudonghoa — 2019-10-11 10:45:46

Công Ty TNHH TM và DV Tăng Minh Phát chuyên cung cấp các thiết bị hãng Schenck process tại Việt Nam.

RTB Ring torsion load cell

Legal-for-trade design according to OIML
High accuracy, even for very small application areas (for legal-for-trade applications up to at least 15 %)
Low power consumption due to high input impedance of 1100 Ω
ATEX/IECEx approval for category 1GD intrinsically safe)
Protection class IP68

Design	Accuracy class
[t]	C3	C5
0.13	V041085.B01	—
0.25	V041086.B01	—
0.50	V041087.B01	V041087.B05
0.25 MR	V041086.B07	—
0.50 MR	V041087.B07	—
Order numbers model ATEX/IECEX II 1G Ex ia IIC T4 Ga/ II 1D Ex ia IIIC T73°C Da/ II 3G Ex nA IIC T4 Gc/ II 3D Ex tc IIIC T63°C DC*
0.13	V041085.B11	—
0.25	V041086.B11	—
0.50	V041087.B11	V041087.B15

Ring-Torsion Load Cells RTN

Variants

Accuracy class

0.05

C5 / C4 Mi 7.5

RTN 1 t

D726173.04

D726173.02

D726173.10

RTN 2.2 t

D726174.04

D726174.02

D726174.10

RTN 4.7 t

D726175.04

D726175.02

D726175.10

RTN 10 t

D726176.04

D726176.02

D726176.10

RTN 15 t

D726177.04

D726177.02

D726177.10

RTN 22 t

D724781.04

D724781.02

D724781.10

RTN 33 t

D724754.04

D724754.02

D724754.10

RTN 47 t

D724782.04

D724782.02

D724782.10

RTN 68 t

D724783.04

D724783.02

D724783.10

RTN 100 t

D724784.04

D724784.02

D724784.10

RTN 150 t

D726178.04

D726178.02

RTN 220 t

D726179.04

D726179.02

RTN 330 t

D726180.04

D726180.02

RTN 470 t

D726181.04

D726181.02

VDW Self-Centering Pressure Load Cell

Design

Material number

VDW 33t,
C3 without mounting parts

V080434.B01

VDW 44t,
C3 without mounting parts

V080434.B02

Set of mounting parts
(2 thrust pieces)
for load cell VDW

V080494.B01

Weighbeam DWB 11.5 ... 25t

Variants

Order No.

DWB 11.5 t

D 703 100.01

DWB 15 t

D 703 100.02

DWB 25 t

D 704 280.03

DWB 11.5 t HT

D 703 100.04

DWB 25 t HT

D 704 280.05

The post Load Cell Schenck process | Cảm biến trọng lượng Schenck process appeared first on cuahangtudonghoa.com.

Cảm biến trọng lượng VBB Schenck process | Load cell VBB Schenck process

cuahangtudonghoa — 2019-10-11 10:08:06

Công Ty TNHH TM và DV Tăng Minh Phát chuyên cung cấp các thiết bị hãng Schenck process tại Việt Nam.

Load cell VBB Schenck process

Variants
Load Cells

Order No.

Ex-Variants
Load Cells

Order No. 2GD

Order No. 2D/3G

VBB 5 kg D1

D 725 417.01

VBB 10 kg D1

D 725 417.02

VBB 10 kg СЗ

D 725 419.02

VBB 10 kg СЗ „Ex"

D 725 419.32

D 725 419.42

VBB 20 kg D1

D 725 417.03

VBB 20 kg C3

D 725 419.03

VBB 20 kg C3 „Ex"

D 725 419.33

D 725 419.43

VBB 50 kg D1

D 725 417.04

VBB 50 kg C3

D 725 419.04

VBB 50 kg C3 „Ex"

D 725 419.34

D 725 419.44

VBB 0.1 t D1

D 725 409.01

VBB 0,1 t D1 „Ex"

D 725 409.61

D 725 409.41

VBB 0.1 t C3

D 725 409.04

VBB 0,1 t C3 „Ex"

D 725 409.64

D 725 409.44

VBB 0.1 t C4

D 726 370.01

VBB 0,1 t C4 „Ex"

D 726 370.31

D 726 370.41

VBB 0.2 t D1

D 725 409.02

VBB 0,2 t D1 „Ex"

D 725 409.62

D 725 409.42

VBB 0.2 t C3

D 725 409.05

VBB 0,2 t C3 „Ex"

D 725 409.65

D 725 409.45

VBB 0.2 t C4

D 726 370.02

VBB 0,2 t C4 „Ex"

D 726 370.32

D 726 370.42

VBB 0.2 t C6

D 726 370.04

VBB 0,2 t C6 „Ex"

D 726 370.34

D 726 370.44

VBB 0.5 t D1

D 725 409.03

VBB 0,5 t D1 „Ex"

D 725 409.63

D 725 409.43

VBB 0.5 t C3

D 725 409.06

VBB 0,5 t C3 „Ex"

D 725 409.66

D 725 409.46

VBB 0.5 t C4

D 726 370.03

VBB 0,5 t C4 „Ex"

D 726 370.33

D 726 370.43

The post Cảm biến trọng lượng VBB Schenck process | Load cell VBB Schenck process appeared first on cuahangtudonghoa.com.

Cảm biến lực SENSiQ® | Đại Lý Schenck process

cuahangtudonghoa — 2019-10-11 09:37:27

Công Ty TNHH TM và DV Tăng Minh Phát chuyên cung cấp các thiết bị hãng Schenck process tại Việt Nam.

Type

SEM

Nominal load

0.25 t ... 0.50 t

1 t ... 100 t

150 t ... 470 t

Weight
(including load cell)

SEM 0.25 … 0.50 2.8 kg

SEM 1 … 4.7 2.9 kg SEM 10 … 22 5.3 kg SEM 33 14 kg SEM 47 26 kg SEM 68 29 kg SEM 100 43 kg

SEM 150 120 kg SEM 220 170 kg SEM 330 250 kg SEM 470 410 kg

Standard SEM

SEM for Extended Temperature Range

Materials

SEM 0.25 t … 4.7 t

SEM 10 t … 470 t

SEM 0.25 t … 4.7 t

SEM 10 t … 470 t

Metal parts

entirely of stainless steel

S235 galvanized

entirely of stainless steel

S355 galvanized

Elastomer

Neoprene (CR)

Silicone (VMQ)

other materials are available refer to data sheet DDP8483

Nominal temperature
(restricted by the load cell)

-10 °C … +40 °C

Service temperature
(restricted by the load cell)

-30 °C … +100 °C

-50 °C … +110 °C

Compression stroke

approx. ≤ 0.8 mm at nominal load

max. permissible inclination of the substructure

0.2°

max. permissible angle between upper and lower connecting structure

0.6°

Standard SEM

SEM with silicone (VMQ)

Model/Order numbers

SEM 0.25

V041386.B01

SEM 33

D 725575.02

SEM 1/2.2

D 726185.11

SEM 100

D 725575.25

SEM 0.50

V041387.B01

SEM 47

D 725575.03

SEM 4.7

D 726185.12

SEM 150

D 726186.11

SEM 1

D 726185.01

SEM 68

D 725575.04

SEM 10 … 22

D 725575.20

SEM 220

D 726186.12

SEM 2.2

D 726185.01

SEM 100

D 725575.05

SEM 10 … 22

D 725575.21*)

SEM 330

D 726186.13

SEM 4.7

D 726185.02

SEM 150

D 726186.01

SEM 33

D 725575.22

SEM 470

D 726186.14

SEM 10 … 22

D 725575.10

SEM 220

D 726186.02

SEM 47

D 725575.23

SEM 10 … 22

D 725575.11*)

SEM 330

D 726186.03

SEM 68

D 725575.24

SEM 470

D 726186.04

Variants

Order Number

0.25 t

V041091.B01

0.50 t

V041092.B01

1 … 2.2 t

D 731186.01

4.7 t

D 731186.02

10 … 22 t

D 731353.01

33 t

D 731415.01

47 t

V654503.B01

68 t

V654503.B11

100 t

V654503.B21

150 t

V654503.B31

220 t

V654503.B41

330 t

V654503.B51

470 t

V654503.B61

Accessories

Thermal protection plate, splash water protection, weld-on plates
See BV-D2228

SENSiQ Secure Mount PLUS

Permissible maximum forces

with SENSiQ Elastomer Mount
and weld-on plate

without SENSiQ Elastomer Mount and without weld-on plate

max. horizontal force

kN

max. vertical force
(lift force)
kN

Variants

Order Number

10 t … 22 t

V555055.B03

V555055.B02

33 t

V555063.B03

V555063.B02

132

47 t

V554145.B03

V554145.B02

188

68 t

V554775.B03

V554775.B02

272

100 t

V554152.B03

V554152.B02

400

150 t

V555070.B03

V555070.B02

600

220 t

V555077.B03

V555077.B02

880

330 t

V555085.B03

V555085.B02

1320

Accessories

Thermal protection plate, splash water protection, weld-on plates

Variants

Order number without base plate

Order number with base plate

Variants

Order number without base plate

Order number with base plate

SPM 1 t

D 725565.16

D 725565.11

SPM 47 t

D 725565.08

D 725565.03

SPM 2.2 t

D 725565.17

D 725565.12

SPM 68 t

D 725565.09

D 725565.04

SPM 4.7 t

D 725565.18

D 725565.13

SPM 100 t

D 725565.10

D 725565.05

SPM 10 t

D 725565.19

D 725565.14

SPM 150 t

D 726616.01

SPM 15 t

D 725565.20

D 725565.15

SPM 220 t

D 726616.02

SPM 22 t

D 725565.06

D 725565.01

SPM 330 t

D 726616.03

SPM 33 t

D 725565.07

D 725565.02

SPM 470 t

D 726616.04

Design	Order number with straight plug outlet	Order number with lateral plug outlet on the right
WB 40 t	V711375.B03	V758596.B01
WB 50 t	V711375.B13	V758596.B11
WB 100 t	V711375.B23	V758596.B21
WB 150 t	V711375.B33	V758596.B31
WB 200 t	V711375.B43	V758596.B41
WB 600 t	V711375.B53	V758596.B51

The post Cảm biến lực SENSiQ® | Đại Lý Schenck process appeared first on cuahangtudonghoa.com.

Speed Sensor FGA 30R2 | Cảm biến tốc độ FGA 30R2 Schenck process

cuahangtudonghoa — 2019-10-10 16:41:19

Công Ty TNHH TM và DV Tăng Minh Phát chuyên cung cấp các thiết bị hãng Schenck process tại Việt Nam.

Speed Sensor FGA 30R2 | Cảm biến tốc độ FGA 30R2

High degree of reliability
Robust design
Maintenance-free storage and seals
Made completely from steel
Legal-for-trade variant for MULTIBELT-type belt weighers
Designed for operation with friction wheel and rocker
Drive system with coupling available
Successor to the FGA 30R with identical connection dimensions
ATEX optional category 2GD (Zone 21, 22, 1 or 2)

FGA 30R2 speed sensors are designed for measuring the belt speed of belt conveyor systems. They are used as optional equipment for MULTIBELT® -type belt weighers. A customized speed sensor can be used in ATEX zones 21, 22, 1 or 2.

The speed sensor consists of a housing with an internal impulse wheel mounted on a drive shaft. The angular velocity of the shaft is measured as a frequency signal through windows in the measuring wheel and with one or two (legal-for-trade) proximity sensor/s and processed using an evaluation device.

The FGA 30R2 speed sensor is made entirely of steel with a powder-coated surface. The FGA 30R2 can be fitted with a rocker and a friction wheel for use as a friction wheel speedometer for registering the speed of the returning belt. Alternatively, with a coupling the FGA 30R2 can be run by e.g. the tail pulley of a belt feeder system.

Operational temperature

-25 °C … +60 °C

Operational temperature, ATEX

-25 °C … +60 °C

Belt speed

< 5 m/s

Max. rotational speed

3000 min-1

Pulses

30 Pulses/revolution

Output signal

Namur

Weight

3,2 kg

Standard design

1 Proximity sensor

Legal for trade design

2 Proximity sensors

ATEX (option)

Zone 21, 22, 1 or 2

The post Speed Sensor FGA 30R2 | Cảm biến tốc độ FGA 30R2 Schenck process appeared first on cuahangtudonghoa.com.

Cảm biến tốc độ FGA 20RSLE Schenck process | Speed Sensor FGA 20RSLE

cuahangtudonghoa — 2019-10-10 16:16:53

Các cảm biến tốc độ FGA 20RSLE được thiết kế để đo tốc độ băng tải.

Công Ty TNHH TM và DV Tăng Minh Phát chuyên cung cấp các thiết bị hãng Schenck process tại Việt Nam.

Cảm biến tốc độ FGA 20RSLE | Speed Sensor FGA 20RSLE

The FGA 20RSLE speed sensors are designed for measuring the belt speed of belt conveyor systems. They are used as optional equipment for MULTIBELT® -type belt weighers. A customized speed sensor can be used in ATEX zones 21, 22, 1 or 2.

The speed sensor consists of a rocker that can be pivoted around an axis. The axis is mounted in a bracket that is attached to the machine (belt conveyor) to be monitored. The measuring wheel is attached to this rocker and runs slipfree on the belt to be measured. The belt speed is measured as a frequency signal through windows in the measuring wheel and with one or two (legal-for-trade) proximity sensor/s and processed using an evaluation device.

The FGA 20RSLE speed sensor is manufactured entirely of a highly corrosion-resistant galvanized steel and in the ATEX – certified model made of 1.4301 stainless steel.

Cost-efficient integration
High reliability
Maintenance-free storage and sealings
Easy handling
Completely made of galvanized steel or stainless steel
Legal-for-trade variant for MULTIBELT® -type belt weighers
ATEX optional category 2GD (zones 21, 22, 1 or 2)

Operating temperature

-20 °C … +50 °C

Operating temperature, ATEX

-20 °C … +50 °C

Belt speed

< 3.5 m/s

Pulses

20 pulses per revolution
= 33.5 pulses per meter of belt

Output signal

Namur

Weight

4.55 kg

Legal-for-trade type

2 proximity sensors

ATEX (option)

Zone 21, 22, 1 or 2

The post Cảm biến tốc độ FGA 20RSLE Schenck process | Speed Sensor FGA 20RSLE appeared first on cuahangtudonghoa.com.

Bộ giá đỡ 3 con lăn Schenck process

cuahangtudonghoa — 2019-10-10 15:39:38

Công Ty TNHH TM và DV Tăng Minh Phát chuyên cung cấp các thiết bị hãng Schenck process tại Việt Nam.

Bộ giá đỡ con lăn Schenck process

MULTIBELT® Single-Idler Belt Weighers

Single-Idler Belt Weigher Variants

BEM 400 - 1400
Belt weigher of modular design, belt widths from 400 - 1400 mm

BEP 400 - 1400
Belt weigher with weighing platform, IEC-belt widths from
400 - 1400 mm

BED 1600 - 2000
Belt weigher with weighing platform, IEC-belt widths from
1600 - 2000 mm

MULTIBELT® Multi-Idler Belt Weighers

Multi-Idler Belt Weigher Variants

BMP 500 - 2000
Belt weigher with weighing platform, IEC belt widths from
500 to 2000 mm

2 BMP 500 - 1400
Belt weigher with weighing platform, IEC belt widths from
500 to 1400 mm

BMC 500 - 2000
Belt weigher with weighing platform, IEC belt widths from 500 to 2000 mm

The post Bộ giá đỡ 3 con lăn Schenck process appeared first on cuahangtudonghoa.com.

Cân điện tử DVC/DVM Schenck process | Platform scales DVC/DVM

cuahangtudonghoa — 2019-10-10 14:03:01

Công Ty TNHH TM và DV Tăng Minh Phát chuyên cung cấp các thiết bị hãng Schenck process tại Việt Nam.

Platform scales DVC/DVM

Size [mm]

Material

Nominal load

Quality

Material No. DVC

Material No. DVM

Platform scales

800 x 600

1.4307

300

V020538.B01

V068044.B01

1000 x 1000

1.4307

600

V020538.B02

1250 x 1000

1.4307

600

V020538.B03

1000 x 1000

1.4307

1500

V020538.B04

V068044.B04

1250 x 1000

1.4307

1500

V020538.B05

V068044.B05

1500 x 1250

1.4307

1500

V020538.B06

V068044.B06

1500 x 1500

1.4307

1500

V020538.B07

V068044.B07

2000 x 1500

1.4307

1500

V020538.B08

V068044.B08

1000 x 1000

1.4307

3000

V020538.B09

V068044.B09

1250 x 1000

1.4307

3000

V020538.B10

V068044.B10

1500 x 1250

1.4307

3000

V020538.B11

V068044.B11

1500 x 1500

1.4307

3000

V020538.B12

V068044.B12

2000 x 1500

1.4307

3000

V020538.B13

V068044.B13

Platform scales Ex-i Zone 1

800 x 600

1.4307

300

V020546.B01

1000 x 1000

1.4307

600

V020546.B02

1250 x 1000

1.4307

600

V020546.B03

1000 x 1000

1.4307

1500

V020546.B04

1250 x 1000

1.4307

1500

V020546.B05

1500 x 1250

1.4307

1500

V020546.B06

1500 x 1500

1.4307

1500

V020546.B07

2000 x 1500

1.4307

1500

V020546.B08

1000 x 1000

1.4307

3000

V020546.B09

1250 x 1000

1.4307

3000

V020546.B10

1500 x 1250

1.4307

3000

V020546.B11

1500 x 1500

1.4307

3000

V020546.B12

2000 x 1500

1.4307

3000

V020546.B13

Foundation Frame

800 x 600

1.0038

V020567.B01

1000 x 1000

1.0038

V020567.B02

1250 x 1000

1.0038

V020567.B03

1500 x 1250

1.0038

V020567.B04

1500 x 1500

1.0038

V020567.B05

2000 x 1500

1.0038

V020567.B06

Foundation Frame

800 x 600

1.4307

V020575.B01

1000 x 1000

1.4307

V020575.B02

1250 x 1000

1.4307

V020575.B03

1500 x 1250

1.4307

V020575.B04

1500 x 1500

1.4307

V020575.B05

2000 x 1500

1.4307

V020575.B06

Small scales

400 x 500

1.4307

V020576.B01

400 x 500

1.4307 Ex-i

V020577.B01

Xem thêm các sản phẩm Schenck process

The post Cân điện tử DVC/DVM Schenck process | Platform scales DVC/DVM appeared first on cuahangtudonghoa.com.

Bộ chuyển đổi DISOBOX® Plus Schenck process | A/D Converter DISOBOX® Plus

cuahangtudonghoa — 2019-10-10 11:24:22

Công Ty TNHH TM và DV Tăng Minh Phát chuyên cung cấp các thiết bị hãng Schenck process tại Việt Nam.

A/D Converter DISOBOX® Plus

Equipment Supplied

Type

Material Nr.

Basic Units

DISOBOX base unit,
A/D converter unit with
8 measuring channels

VME 21080

V081000.B01

DISOBOX base unit, A/D converter unit with
4 measuring channels

VME 21040

V081001.B01

DISOBOX, A/D converter unit
with 8 measuring channels for ATEX category 3D

VME 21080-3D

V081100.B01

DISOBOX, A/D converter unit
with 4 measuring channels for ATEX category 3D

VME 21040-3D

V081101.B01

DISOBOX, A/D converter unit
with 8 measuring channels for ATEX category 2D

VME 21080-2D

V081102.B01

DISOBOX basic unit,
A/D converter unit with
8 measuring channels and overvoltage protection for the
load cell connections

VME 21081

V081003.B01

DISOBOX basic unit, A/D converter unit with
4 measuring channels and
overvoltage protection for the load cell connections

VME 21041

V081004.B01

DISOBOX basic unit,
A/D converter unit with
8 measuring channels, stainless steel housing

VME 21084

V081005.B01

DISOBOX basic unit,
A/D converter unit with
4 measuring channels, stainless steel housing

VME 21044

V081006.B01

Bus Cards

Optional PROFIBUS,
mounted and wired

VPB 28020

V081904.B01

Optional PROFINET,
mounted and wired

VPN 28020

V533496.B01

Optional DeviceNet,
mounted and wired

VCB 28020

V081906.B01

Optional interface expansion,
mounted and wired

VSS 28020

V081905.B01

Analog I/O

Analog Input

VAI 20100

V078800.B01

Analog Output 0 - 20 mA,
max. 11 V

VAO 20100

V078801.B01

Analog Output 0 - 10 V,
max. 50 mA

VAO 20101

V078802.B01

Accessories

Power supply unit/

VNT 20410

V028209.B01

Load cell simulator,
8 channel

VWZ 21000

V081029.B01

DISOPLAN

VPL 20430

V029764.B01

Grounding angle for fitting the
PEL connections of the load cells

V035403.B01

DISOMAT® Opus - ZEUS Weighbridge | DISOMAT® Opus Weight Indicators

The post Bộ chuyển đổi DISOBOX® Plus Schenck process | A/D Converter DISOBOX® Plus appeared first on cuahangtudonghoa.com.

DISOMAT® Opus - ZEUS Weighbridge | Schenck process Việt Nam

cuahangtudonghoa — 2019-10-10 10:43:52

Công Ty TNHH TM và DV Tăng Minh Phát chuyên cung cấp các thiết bị hãng Schenck process tại Việt Nam.

DISOMAT® Opus - ZEUS Weighbridge

DISOMAT® Opus Road/Rail
Weighbridge application package
Easy operation
Legal-for-trade measurement value transducer for use in PC controlled scale workplaces
Integrable legal-for-trade memory
Separate strike-key keyboard for alphanumeric input
Also suitable for use as static rail weighing system

Chức năng DISOMAT® Opus - ZEUS Weighbridge

First-/ Second Weighing
The vehicle is weighed upon plant entrance.
The weight is put into intermediate storage under the truck license or wagon number.
First weighing data are transferred to printer interface or registered in the legal-for-trade memory.
The outgoing vehicle is weighed again.
The stored weight is identified using the truck or wagon number.
The difference in weight equals the material amount loaded or unloaded in plant.
When a printer is connected, the weights from first and second weighing are finally printed out on the weighing certificate including the calculated net weight (see below).
Querying the vehicle number / wagon number and sort number can be suppressed by configuration for simple applications that have to be done quickly.
The data record of first weighing is maintained as long as possible even after second weighing. This makes it possible to repeat second weighing, for instance if
there is an overload. If first weighing is done for the vehicle again or if the firstweighings file is full, the data record is deleted.

Variant

Ordering Nr.

DISOMAT Opus Maxi, VKG 20700 Zeus,
Stainless steel unit IP65 for desk-top or wall instal- lation with an activated Zeus 'road weigh bridge'
application package, remote keyboard, printer cable and operating manual.

V040081.B01 (de) V040081.B02 (gb)

DISOMAT Opus Maxi, VKG 20700 Zeus,
as above, but with VMM 20700 legal-for-trade memory, no printer cable.

V040080.B01 (de) V040080.B02 (gb)

Activation for Zeus 'road weigh bridge' application package.

V040079.B01

DISOMAT® Opus Weight Indicators | DISOMAT® Satus Weighing Transmitter

The post DISOMAT® Opus - ZEUS Weighbridge | Schenck process Việt Nam appeared first on cuahangtudonghoa.com.

DISOMAT® Opus Weight Indicators | Schenck process Việt Nam

cuahangtudonghoa — 2019-10-10 10:13:20

Công Ty TNHH TM và DV Tăng Minh Phát chuyên cung cấp các thiết bị hãng Schenck process tại Việt Nam

DISOMAT® Opus Weight Indicators

Legal for trade weighing indicator for a wide variety of applications
Stainless steel - at a high protection class for table-top and wall mounting
Top-hat rail design
Panel installation version
Built-in legal-for trade memory (optional)
Fieldbus interface
Ethernet interface, can also be used for
configuration
USB cable for optional α/n PC keyboard
All components can be exchanged without re-verification
For hazardous areas according to ATEX category 3D

DISOMAT® Opus

Compact and economical for logistics applications

The cost-effective solution for legal-for-trade applications: DISOMAT® Opus

The basic solution that pays off in legal-for-trade applications. It registers weight values, displays them, prints them out, and forwards them to a higher-level system if desired. The DISOMAT® Opus offers two housing options, which include a tabletop device and a wall-mounted device both in stainless steel design. Problem-free interaction is achieved due to optimal hardware and software technology.

The DISOMAT® Opus is ideal for platform scales, container scales or single-component dosing. The selection of different interfaces enables a wide range of simple process applications.

V040000.B11

DISOMAT Opus maxi, VKG 20700,
Stainless steel unit IP65

V040001.B11

DISOMAT Opus mini, VKG 20710,
Stainless steel unit IP65

V040003.B11

DISOMAT Opus maxi, VKG 20740,
Stainless steel unit IP65, 24 VDC supply

V040002.B01

DISOMAT Opus top-hat rail unit,
VEG 20720

V063320.B01

DISOMAT Opus, Panel installation unit
VEG 20700

V063321.B01

DISOMAT Opus, Panel installation unit
VEG 20750, 24 VDC supply

V081990.B01

DISOMAT Opus maxi, stainless steel unit for
ATEX category 3D, main supply

V095580.B01

DISOMAT Opus maxi, stainless steel unit for
ATEX category 3D, 24 VDC supply

V535499.B01

PROFINET kit, VPN 28020 for VKG

V054033.B01

PROFIBUS DP kit, VPB 28020 for VKG

V081906.B01

DeviceNet kit, VCB 28020 for VKG

V081908.B01

PROFIBUS DP kit, VPB 28020 for VEG 20700

V081909.B01

DeviceNet kit, VCB 28020 for VEG 20700

V064721.B06

Procedure EtherNet/IP

V040045.B01

Remote PC keyboard (USB), German key assignment

V040045.B02

Remote PC keyboard (USB),
English key assignment

V040026.B01

Legal-for-trade memory VMM 20407

DISOMAT® Satus | DISOMAT® Parvus

The post DISOMAT® Opus Weight Indicators | Schenck process Việt Nam appeared first on cuahangtudonghoa.com.

DISOMAT® Satus Weighing Transmitter | Schenck process Việt Nam

cuahangtudonghoa — 2019-10-09 20:16:57

Công Ty TNHH TM và DV Tăng Minh Phát chuyên cung cấp thiết bị Schenck process tại Việt Nam.

DISOMAT® Satus Digital Weighing Transmitter

Digital Weighing Transmitter
Level Control
Single-Component Feed Control System
System-Compatible with Fieldbus,
Serial Interface, Analog Output and Binary Inputs and Outputs
Ethernet Connection
Comfortable commissioning with the DISOPLAN Program
Four 230 VAC Relay Outputs
Three Binary Inputs
Optional Weight Display
Model Designed for Connecting Scales in Hazardous Areas

1. Mô tả DISOMAT® Satus Weighing Transmitter

The inexpensive solution for decentralised measuring and control
Excellent cost-effectiveness and variety of applications are what single out the DISOMAT® Satus digital scale transmitter. It is suitable for a large number of simple, standard weighing tasks.

2. Ứng dụng DISOMAT® Satus

Weight monitoring and control of single-component feeding processes. Together with Schenck Process DMA measuring eyes, it can be used easily and inexpensively for fill level measurements with lower accuracy requirements.

V052188.B01

DISOMAT Satus VSE 20900
circuit board incl. front plate

V052188.B02

DISOMAT Satus VSE 20901
circuit board incl. front plate; with mounted
PROFIBUS option

V053903.B01

DISOMAT Satus VSE 20910
circuit board incl. front plate,
with integrated LED weight display

V055346.B01

VNG0900 19" rack

V053978.B01

Power supply unit VNT 20901 230 VAC,
for up to 9 VSE 209xx

V068489.B01

VXB 20901 safety barriers for
RTN/RTB/VBB/PWS load cells in potentially hazardous area of ATEX category 2G

V068493.B01

VXB 20911 safety barrier for RTK/DMA
weigh cells

V053917.B02

PROFIBUS installation set for
DISOMAT SATUS

V053918.B02

DeviceNet Satus installation set

V029764.B01

DISOPLAN VPL 20430 configuration
software

DISOMAT® Parvus | INTECONT Tersus

The post DISOMAT® Satus Weighing Transmitter | Schenck process Việt Nam appeared first on cuahangtudonghoa.com.

DISOMAT® Parvus Schenck process | Schenck process Việt Nam

cuahangtudonghoa — 2019-10-09 13:43:34

Công Ty TNHH TM và DV Tăng Minh Phát chuyên cung cấp thiết bị Schenck process tại Việt Nam.

1. Giới thiệu DISOMAT® Parvus

DISOMAT® Parvus

Simple and cost-effective
The DISOMAT Parvus is the perfect evaluation device for simple, non-legal-for-trade scales. This low-cost weighing indicator for displaying weights without ignoring the high quality standards of Schenck Process is the perfect addition to the Schenck Process range of weighing and feeding electronics.

Light and more reliable handling
The device has a large, clear weight display. The technical weighing functions can be controlled directly via the keypad: The membrane keypad for basic scales functions has nine keys, making it very simple to use. The DISOMAT Parvus is especially well suited to work with container and platform scales or other applications of a similar complexity.

DISOMAT Parvus

The VEG 21 100 is the DISOMAT Parvus variant for installing in switch panels, control cabinet doors or in the front of control housings. The installation frame is made from stainless steel, the seal on the rear satisfies protection class IP65. Spring terminals are used for the electrical connections and the power supply has protection against accidental contact.

2. Ưu điểm DISOMAT® Parvus

Stainless steel front frame
Backlit LCD
Plain text operator guidance
Configuration using the DISOPLAN service tool (PC-based)
Limit value contacts
Analog output
Two limit value contacts, for example, for monitoring container levels
Two binary outputs provide an alternative form of control from the keypad
Analog output for issuing weight values
Serial interfaces for controlling auxiliary displays.

Material Number

DISOMAT Parvus panel mounted unit VEG 21100, Stainless steel face, power supply 85 … 250 VAC

V090000.B01

INTECONT® Tersus | INTECONT® Satus

The post DISOMAT® Parvus Schenck process | Schenck process Việt Nam appeared first on cuahangtudonghoa.com.

Bộ điều khiển INTECONT Tersus Schenck process

cuahangtudonghoa — 2019-10-09 13:18:09

Công Ty TNHH TM và DV Tăng Minh Phát chuyên cung cấp thiết bị Schenck process tại Việt Nam.

Bộ điều khiển INTECONT Tersus Schenck process

Display

LCD graphic display with adjustable brightness

Keyboard

22 buttons

Supply voltage

24 VDC +50 % / -25 %, max. 20 VA

Temperature range

Operation temperature:
Standard device: -25 °C … +60 °C Able for legal-for-trade and ATEX device: -20 °C … +40 °C Storage temperature (all devices): -40 °C … +80 °C

Scales connection

Power supply:                                   12 V alternating voltage
Load cell impedance:                      Rmin. 80 Ω
Cable length:                                     max. 1000 m

Housing

Operating panel rack model IP54, optional bracket for IP65
Protect keyboard and display against longer, direct sunlight.

Binary inputs

5 x optocouplers 18 … 36 VDC, type 5 mA
1 x NAMUR and 1 x NAMUR/voltage 0.04 … 3,000 Hz

Binary outputs

8 x relays, max. 230 V, 8 A ohm / 1 A inductive

Impulse output

1 optocoupler for totalizing counter 24 V, 0.1 A, max. 10 Hz

Analog outputs

2 x 0(4) ... 20 mA, load max. 500 Ω, galvanically isolated

Analog input

Current 0(4) … 20 mA, input impedance 100 Ω, galvanically separated, or voltage 0 … 10 V

Serial interfaces

Interface 1: EasyServe / Interface 2: Printer / Interface 3: Large display

Power supply VNT0650 internal (optional)

85 … 264 VAC / 24 VDC

Fieldbus (optional)

Can be selected from: Modbus-RTU, PROFIBUS DP, DeviceNet, Modbus-TCP, EtherNet/IP, PROFINET IO

Analog signal card
(optional) VEA0451

2 Analog outputs 0(4) … 20 mA, load max. 500 Ω, galvanically isolated, common potential
2 analog inputs 0(4) … 20 mA, input impedance 100 Ω
galvanically isolated, common potential

ATEX

Optional approval for use in explosive atmosphere (zone 22) at front

Type Code

ITE:

aa.

bb.

cc.

dd.

ee. ff

Product name

Software

Housing

Fieldbus

Input/output
extension

Power Proximity sensors supply supply

INTECONT® Tersus

BW: Belt weigher
BWLFT: Legal-for-trade belt weigher
MC: Coriolis mass flow meter
IF: MULTISTREAM solids flow meter

EG: Panel mount unit
EG3D: Panel mount unit for frontal installation in EX zone 22

0: Standard Modbus TCP
SS: Modbus-RTU PB: PROFIBUS DP PN: PROFINET IO CB: DeviceNet
EI: EtherNet/IP

0: No extension
EA: Extension VEA0451

0: No internal power supply
NT: Internal power supply VNT0650

No specification: Standard
[3G] [3D] Ex-i: Ex-i-supply for sensors in EX
zone 2 or 22

Accessories

Description

Type

Material nummer

Fieldbuscommunication modules

Modbus-RTU

VSS 28020

V081902.B01

PROFIBUS DP (Slave)

VPB 28020

V081901.B01

DeviceNet

VCB 28020

V081903.B01

EtherNet/IP activation

VET 20700

V040035.B01

PROFINET IO (Slave)

VPN 28020

V097103.B01

Further Options

Installed power supply

VNT0650

V082050.B01

Analog signal card with 2 analog inputs and 2 analog outputs

VEA 20451

V054098.B01

Operating panel installation kit for protection class IP65 for device front

V082039.B01

Service software

EasyServe

VPC 20150

E144541.01

Large displays

Large 5-digit display, LED, 100 mm digit height

VLD 20100

V090252.B01

Large 6-digit display, LCD, 45 mm digit height

VLZ 20045

V067304.B01

Large 5-digit display, LCD, 100 mm digit height

VLZ 20100

V066611.B01

INTECONT Satus | INTECONT® Tersus | Schenck process Việt Nam

The post Bộ điều khiển INTECONT Tersus Schenck process appeared first on cuahangtudonghoa.com.

INTECONT® Satus Bộ điều khiển cân băng tải Schenck process

cuahangtudonghoa — 2019-10-09 11:04:31

Công Ty TNHH TM và DV Tăng Minh Phát chuyên cung cấp thiết bị Schenck process tại Việt Nam.

INTECONT® Satus

Systems	Type	Material number
INTECONT® Satus, Stainless steel housing IP65	VKG 20790	V040007.B11
INTECONT® Satus with Profibus Fieldbus card	VKG 20792	V040007.B11
INTECONT® Satus with DeviceNet Fieldbus card	VKG 20793	V060128.B11
INTECONT® Satus with Ethernet/IP Interface	VKG 20795	V060129.B11
INTECONT® Satus, Stainless steel housing IP65, 24 VDC	VKG 20796	V084590.B11
INTECONT® Satus with Profibus Fieldbus card, 24 VDC	VKG 20797	V084720.B01
INTECONT® Satus with DeviceNet Fieldbus card, 24 VDC	VKG 20798	V084721.B01
INTECONT® Satus with Ethernet/IP Interface, 24 VDC	VKG 20799	V084722.B01
Options
Profibus Fieldbus card	VPB 8020	V054033.B01
DeviceNet Fieldbus card	VCB 8020	V081906.B01
Ethernet/IP activating	VET 20700	V040035.B01
Spare parts
Load cell plug (dongle)	VDO 20700	V040013.B01
EasyServe
Software (CD)	VPC 20150	E144541.01
Cable for EasyServe, 9p/3p		V052410.B01

INTECONT Satus | INTECONT® Tersus | Schenck process Việt Nam

The post INTECONT® Satus Bộ điều khiển cân băng tải Schenck process appeared first on cuahangtudonghoa.com.

Màn hình hiển thị Load Cell Schenck process

cuahangtudonghoa — 2019-10-09 10:39:13

Công Ty TNHH TM và DV Tăng Minh Phát chuyên cung cấp thiết bị Schenck process tại Việt Nam.

Màn hình hiển thị Load Cell Schenck process

Model

VLD 20100

DLS 160

DLS 250

VLZ 20100

VLZ 20045

Display principle

LED

LCD

Display colour

Red

Black, white backlight

Black, amber backlight

Number of digits

Digit height [mm]

100

160

250

100

Unit

g, kg, t
(Adhesive symbols)

g, kg, t

g, kg, t, lb

----

Status display

Zero, tare, net

Zero, tare, net, no-motion

Zero, tare, net

----

Reading distance

40 m

60 m

100 m

40 m

15 m

Protection type

IP54

IP65

Temperature range

-20 °C ... +45 °C

0 °C ... +55 °C

-30 °C … +60 °C

-10 °C - +60 °C

Legal-for-trade

Yes

Mounting variant

Floor, wall and ceiling mounting

Wall or ceiling mounting

Weight approx.

7.4 kg

21 kg

40 kg

4.5 kg

0.8 kg

Swivel-mounted

Yes

No, bracket for swivel- mounting available as option

Yes

Data interface

RS423, RS232

RS232

RS232, RS485, TTY 20 mA

Power supply

100 ... 240 VAC (47 ... 63 Hz); max. 40 W

230 VAC +15/-10 % (47 ... 63 Hz)

24 VDC,
100 mA

24 VDC,
60 mA

Max. cable length approx.

100 m

600 m

Order No.

V090252.B01

E909054.02/04

V066611.B01

V067304.B01

Model

VLZ 20151

VLZ 20250

DLS 030E / DLZ 030EF / DLZ 050EF

VAG 20200-D

Display principle

LED, 7-Segment

LCD

Colour

Red

Black

Number of digits

Digit height [mm]

30 / 30 / 50

Unit

g, kg, t

Selectable

kg, t, lb

Protection type

IP40, optional IP65

IP40

IP40 / IP65 / IP65

IP54 front

Temperature range

0 °C ... 60 °C

-10 °C … 50 °C / 65 °C / T5

-10 °C … +50 °C

Legal-for-trade

Yes

Explosion-proof design

Ex ib IIC T6 for ATEX Zone 1

Mounting variant

Panel-mounting

Panel-mounting/filed housing/filed housing

Panel-mounting

Data interface

RS232, RS422 / RS485 / TTY 20 mA

Analog 4 … 20 mA

RS232

Power supply

16 … 30 VDC,
230 VAC optional

---

12 … 24 VDC

Max. cable length approx.

100 m

750 m

15 m

Order No.

V036225. B01/B02

E054593.01

E909034.01 / E909034.02 / E909033.01

V070449.B01

Bảng điều khiển DISOMAT® /DISOBOX® Schenck process | Schenck process Việt Nam

The post Màn hình hiển thị Load Cell Schenck process appeared first on cuahangtudonghoa.com.

Bảng điều khiển DISOMAT® /DISOBOX® Schenck process

cuahangtudonghoa — 2019-10-09 10:27:38

Công Ty TNHH TM và DV Tăng Minh Phát chuyên cung cấp thiết bị Schenck process tại Việt Nam.

Display and Operator Panels VOP 280xx/VFG 28000 Keyboard VTT 28000

Design

Material Number

VOP 28000 display and operating unit,
front-of-panel unit, plastic front frame, 24 VDC

V078510.B01

VOP 28030 display and operating unit,
front-of-panel unit, plastic front frame, 85 … 264 VAC

V078513.B01

VOP 28010 display and operating unit,
hand-held unit (mobile version), plastic housing, 24 VDC

V078511.B01

VOP 28040 display and operating unit,
desktop or wall-mounted, incl. wall bracket, stainless steel housing, 85 … 264 VAC

V078514.B01

VOP 28040-3D display and operating unit, ATEX category 3D (Zone 22),
desktop or wall-mounted, incl. wall bracket, stainless steel housing, 85 … 264 VAC

V078529.B01

Keyboard VTT 28000

V081929.B01

VFG 28000 display and operating unit,
field unit, stainless steel, incl. VOP 28000, VTT 28000 and 7 operating buttons

V577415.B01

VFG 28000 display and operating unit,
field unit, stainless steel, incl. VOP 28030, VTT 28000 and 7 operating buttons

On request

Display and Operating Panels VOP 28090/VFG 28090 ATEX 2GD Keyboard VTT 28090 ATEX 2GD

Design

Material Number

VOP 28090 ATEX 2GD display and operating unit, front-of-panel unit, stainless steel, 24 VDC

V097000.B01

Keyboard VTT 28090 ATEX 2GD

V097001.B01

VFG 28090 ATEX 2GD display and operating unit
field device, stainless steel, incl. VOP 28090 and VTT 28090

V559477.B01

Màn hình hiển thị Load Cell Schenck process | Schenck process Việt Nam

The post Bảng điều khiển DISOMAT® /DISOBOX® Schenck process appeared first on cuahangtudonghoa.com.

Measuring, Data and Control Cables Schenck process Việt Nam

cuahangtudonghoa — 2019-10-09 10:12:13

Công Ty TNHH TM và DV Tăng Minh Phát chuyên cung cấp thiết bị Schenck process tại Việt Nam.

Cable (Cores x Cross Section)	Application	Outer Diameter [mm]	Weight per 100 m [kg]	Ordering Number
Measuring cable 1 x 2 x 0.5 mm2 + 2 x 2 x 0.25 mm2. Shielded in pairs and totally shielded	Standard measuring cable for connection of load cells for discontinuous weighing systems (DISOMAT) Temperature range: moved -5 … +70 °C rigid installation -20 … +70 °C	9	11.3	Standard gray V085231.B01
				Blue, for intrinsically safe circuits V087819.B01
Measuring and sensor cable 5 x 2 x 0.5 mm2	Standard measuring cable for connection of load cells for continuous weighing systems. In addition, a speed sensor can be connected.	12	20	3849.059
Measuring cable 7 x 0.5 mm2, screened	Measuring cable for trailing cable installation and energy chains min. 80 mm bending radius Ozone- and UV-resistant For use in energy chains: max. trailing distance 20 m max. trailing speed 10 m/s Temperature range: moved -25 … +80 °C at rest -40 … +80 °C	10.7	16	V063682.B01
Measuring cable 7 x 0.5 mm2, screened	Strain-relieved measuring cable for cable drum, tensile strength 300 N Temperature range: moved -25 … +80 °C at rest -40 … +80 °C	9.8	15.8	3849.711
Measuring cable 4 x 2 x 0.5 mm2, screened	Silicone cable for ambient temperatures -65 °C … +180 °C and fixed installation. (Supply only in certain lengths)	9.3	14	V080372.B01 (50 m) V080372.B02 (100 m)
Measuring and data cable 4 x 2 x 0.23 mm2, shielded in pairs and totally shielded	Connection of DISOMAT DT display and control terminal to the DISOMAT weighing electronics. Also suitable for load-cell connection Temperature range: moved -5 … +70 °C rigid installation -20 … +70 °C	8	7.5	3849.009
Measuring and data cable 3 x 2 x 0.23 mm2, screened	Universal data or fieldbus cable for medium-speed bus systems; CAN, PROFIBUS to 0.5 MBit/s, or other serial connections. Also suitable for load-cell connection (length max. 100 m).	6.8	5.7	3849.306
Fieldbus cable for DeviceNet and Local Bus 2 x 0.33 mm2 + 2 x 0.2 mm2, screened	Special cable for DeviceNet fieldbus and Local Bus with DISOCONT (thin cable)	7		3849.074
Fieldbus cable for PROFIBUS 2 x 0.64 mm2, screened	Special cable for PROFIBUS DP up to 12 MBit/s	7.7	2.5	3849.219
Data cable, 2 x 2 x 0.14 mm2, screened	Universal data cable for serial connection of displays and printers	6	3.8	3849.420
Control cable 12 x 0.22 mm2, screened	Connection of binary inputs and outputs	9	10.6	3849.01
Control cable 14 x 0.25 mm2, screened	Connection of binary inputs and outputs, e. g. for connection to VLG	8	6.5	3849.073

The post Measuring, Data and Control Cables Schenck process Việt Nam appeared first on cuahangtudonghoa.com.

Hộp điện Types VAK and VKK Schenck process

cuahangtudonghoa — 2019-10-08 20:01:59

Công Ty TNHH TM và DV Tăng Minh Phát chuyên cung cấp thiết bị Schenck process tại Việt Nam.

Terminal Boxes Types VAK and VKK for Sensors

Xem chi tiết tại hãng Schenck process

Variant

Order No. Standard Design

Order No. Model
ATEX 2G, 2D

IECEx
*)

EAC
*)

VKK 28001
Cable box, polyester housing, spring terminals

V053956.B01

VKK 28011
Cable box, aluminium housing, spring terminals

V053957.B01

V595989.B01

VKK 28021
Cable box, stainless steel housing, spring terminals

V053958.B01

V649087.B01

VKK 28004
Cable summation box for max. 4 load cells, polyester housing, spring terminals

V053953.B01

VKK 28014
Cable summation box for max. 4 load cells, aluminium housing, spring terminals

V053954.B01

V595988.B01

VKK 28024
Cable summation box for max. 4 load cells, stainless steel housing, spring terminals

V053955.B01

V512515.B01

VKK 28006
Cable summation box for max. 6 load cells, polyester housing, spring terminals

V076863.B01

VKK 28016
Cable summation box for max. 6 load cells, aluminium housing, spring terminals

V649089.B01

VKK 28026
Cable summation box for max. 6 load cells, stainless steel housing, spring terminals

V649085.B01

VKK 28008
Cable summation box for max. 8 load cells, polyester housing, integrated overvoltage protection, screw terminals

V041675.B01

VKK 28018
Cable summation box for max. 8 load cells, aluminium housing, screw terminals

V649086.B01

VKK 28028
Cable summation box for max. 8 load cells, stainless steel housing, screw terminals

V649088.B01

VBS 28011
Overvoltage protection module with aluminium housing, to protect the load cell resp. the control electronics

V053969.B01

V053969.B51 (only 2D)

VAK 28040
Junction box with 14 terminals, extension 1 load cell + 2 sensors or 2 load cells without corner adjustment, polyester housing

V029901.B01

VAK 28040-2GD
Junction box with 14 terminals, extension 1 load cell + 2 sensors or 2 load cells without corner adjustment, aluminium housing

V583197.B01

VAK 28040-2GD-SS
Junction box with 14 terminals, extension 1 load cell + 2 sensors or 2 load cells without corner adjustment, stainless steel housing

V653900.B01

VAK 28080
Junction box with 18 terminals, 4 load cell + 2 sensors (without corner adjustment), polyester housing

V583558.B01

VAK 28080-2GD
Junction box with 18 terminals, 4 load cell + 2 sensors (without corner adjustment), aluminium housing

V580943.B01

VAK 28080-2GD-SS
Junction box with 18 terminals, 4 load cell + 2 sensors (without corner adjustment), stainless steel housing

V654495.B01

VAK 28051
Junction box with 16 terminals for the connection of motors, polyester housing

V583561.B01

VAK 28051-2GD
Junction box with 16 terminals for the connection of motors, aluminium housing

V580776.B01

VAK 28051
Junction box with 16 terminals for the connection of motors, stainless steel housing

V654496.B01

VAK 20120
Junction box with 15 terminals for the connection of motors, incl. the motor protective switch, polyester housing

F217763.03
**)

VAK 20120-2GD
Junction box with 15 terminals for the connection of motors, incl. the motor protective switch, aluminium housing

V657753.B01 (only 2D)
**)

**) This order number refers to the standard terminal boxe with no motor protection.
The motor protection is included on an order-specific basis.

*)
X = available
- = not available

DBS6
Overvoltage protection module for retrofit of a VKK 28006

D707465.01

VBS001
Overvoltage protection module without housing (printed circuit board)

V039944.B01

VKK 28001

VKK 28011

VBS 28011

VKK 28021

VKK 28004

VKK 28014

VKK 28024

VKK 28006

VKK 28016

VKK 28026

VKK 28008

VKK 28018

VKK 28028

VAK 28040-(2GD)

VAK 28040-2GD-SS

VAK 28080-(2GD) VAK 28051-(2GD)

VAK 28080-2GD-SS VAK 28051-2GD-SS

VAK 20120-(2GD)

DISOTEST 11 and VWZ 20410 | Schenck process Việt Nam

The post Hộp điện Types VAK and VKK Schenck process appeared first on cuahangtudonghoa.com.

DISOTEST 11 and VWZ 20410 | Schenck process Việt Nam

cuahangtudonghoa — 2019-10-08 15:37:32

Công Ty TNHH TM và DV Tăng Minh Phát chuyên cung cấp thiết bị Schenck process tại Việt Nam

DISOTEST 11 and VWZ 20410

Simulation of 2 complete scales, or 8 single load cells.
Presetting of input signals.
Display of output signals.
Compatible with all DISOMAT weighing electronics.
Designed for functional testing of system and testing of configuration outside the plant.

Application

Designed to simulate all peripherals of the weighing electronics, Scale
Simulators DISOTEST 11 and VWZ 20410 enable a measuring system to be tested outside the plant without disruption to normal operations.
Furthermore, settings and/or configured sequences can be tested and optimised outside the plant.

Equipment

DISOTEST 11 simulates max.

- 2 scales
- 8 binary inputs
- 12 binary outputs.

Using adapter cables, the base unit is adjusted to the different DISOMAT variants. VWZ 20410 is designed to simulate up to 8 load cells for the local A/D converter unit, the so-called DISOBOX.

VFM 28000 Radio Module | Đại Lý Schenck process Việt Nam

The post DISOTEST 11 and VWZ 20410 | Schenck process Việt Nam appeared first on cuahangtudonghoa.com.

VFM 28000 Radio Module | Schenck process Việt Nam

cuahangtudonghoa — 2019-10-08 14:38:11

Công Ty TNHH TM và DV Tăng Minh Phát chuyên cung cấp thiết bị Schenck process tại Việt Nam

The VFM 28000 radio module is used as a substitute for cable connections in situations in which installation of cables would be unnecessarily expensive, if cables could be easily damaged or if cables cannot be used.
Typical applications are:
- Coupling of weighing electronics to a crane crossbeam (replacing a cable drum or a trailing cable installation)
- Connections between mobile plant components, containers free to move to a degree, or operating panels in vehicles
- Connections over long distances between plant components, in particular across open spaces
- Communication between a DISOMAT and a mirror device or a VOP display device or communication with a DISOBOX (with the RF modules only)
- Control of a large display or a printer Combined with the DISOMAT and DISOBOX series analysis devices, the VFM modems are also certified for the transfer of legal-for-trade data.
As radio frequency modems the VFM devices require no broadcast licenses anywhere in
Europe – national legislation must be referred to outside Europe.
The Bluetooth version can be used worldwide.

VFM 28000 Radio Module

Radio modem substitute for cable connections between scales system components or between scales and plant system
RF modems, broadcast-license free Europewide Frequency band: 869 MHz
Radio range 250 m (with clear line of sight)
Multi-channel compliant
Bluetooth radio module (class 1) range 100 m
Protection class IP65
Approved for legal-for-trade operation

External dimensions
L x W x H [mm]

220 x 120 x 91

Interfaces

1 x RS422-4-wire for communication over longer distances
1 x RS232
Can be operated as an RS232 ó RS422 converter

Supply voltage DC

24 VDC (range: 18 ... 36 VDC); typically 10 W

Max. data rate (HF side)

38,400 Baud (LR design: 19,200 Baud)

Supply voltage AC

85 … 264 VAC

Protection class

IP65, NEMA 4X

Operating temperature range

-20 °C … 60 °C

Type

Description

Material Number

VFM 28000
Basic unit

Suitable as a 100 … 240 VAC è 24 VDC,
10 W power supply and as an RS232 ó RS422 inter- face converter

V081931.B01

VFM 28000 BT

Bluetooth radio module class 1; range 100 m

V081932.B01

VFM 28000 RF

Short range radio module, 869 MHz, 50 mW, range 250 m

V081933.B01

DISOTEST 11 and VWZ 20410 | Schenck process Việt Nam

The post VFM 28000 Radio Module | Schenck process Việt Nam appeared first on cuahangtudonghoa.com.