GSAV-4000 Venturi Flowmeter Kometer | Lưu lượng kế GSAV-4000 Kometer

cuahangtudonghoa — 2019-08-20 08:54:59

Công Ty TNHH TM và DV Tăng Minh Phát là đại lý phân phối Venturi Flowmeter Kometer tại Việt Nam

GSAV-4000 Venturi Flowmeter Kometer

1. Mô tả lưu lượng kế GSAV-4000 Kometer

GSAV-4000 is a venturi tube flow meter, specially designed to be applied to fluids sensitive to pressure loss, whose feature is a lower pressure loss compared with orifice type or nozzle type flow meter. Able to transmit the flow rate signal to the outside for checking, it can be controlled while interlocked with several peripheral devices.

2. Tính chất GSAV-4000 Venturi Flowmeter

• Applicable to most of fluids
• Special design to minimize pressure loss
• Can be used for high temperature and pressure fluids and their piping conditions
• Momentary flow and integrated flow can be easily checked on the monitor
• The output signal can be linked with various devices
• Can be freely installed horizontally and vertically
• Can be manufactured with a small diameter up to a large diameter

3. Thông số kỹ thuật đồng hồ đo lưu lượng GSAV-4000

Size

10A (3/8") - 300A (12")

Process Connection

Flange type - KS / JIS / ANSI / ASME / DIN Std.
Taper Pipe Thread type (PT)

Flow Ranges

Water - 0.1 ㎥/h ~ 1600 ㎥/h
Air - 0.8 N㎥/h ~ 15600 N㎥/h

Accuracy

±1.0 % F.S (Option ±0.5 % F.S)

Fluid Temperature

Max 120 ℃

Max. Pressure

Max. 30 kgf/㎠.G

Power Supply

DV 24V (2-Wire), AC 110/220 V

Output

DC 4-20 mA, Pulse

GSAV-4000 Kometer | Kometer Việt Nam

The post GSAV-4000 Venturi Flowmeter Kometer | Lưu lượng kế GSAV-4000 Kometer appeared first on cuahangtudonghoa.com.

Đồng hồ đo lưu lượng NDPE Kometer | NDPE Differential Pressure Flowmeter Kometer

cuahangtudonghoa — 2019-08-18 18:57:44

Công Ty TNHH TM và DV Tăng Minh Phát là đại lý phân phối Differential Pressure Flowmeter Kometer tại Việt Nam

Đồng hồ đo lưu lượng NDPE Kometer

1. Mô tả Differential Pressure Flowmeter Kometer NDPE

NDPE-S is a differential pressure flow meter which can check the momentary flow rate and the integrated flow rate at the site using differential pressure transmitter installed into the orifice body.

It can be utilized at nearly most of industrial sites as it can be used for most of fluids (liquids, gases and saturated vapor) and also can be used at sites with high temperature and pressure. In applying to the piping it can be easily installed horizontally and vertically with a high degree of freedom having a small diameter up to a large diameter.

2. Đặc tính lưu lượng kế Kometer NDPE

• Applicable to most of fluids
• Can be used for high temperature and pressure fluids and their piping conditions
• Momentary flow and integrated flow can be easily checked on the monitor
• High precision even under fluctuating temperature and pressure conditions
• The output signal can be linked with various devices
• Can be freely installed horizontally and vertically
• Can be manufactured with a small diameter up to a large diameter

3. Thông số kỹ thuật đồng hồ đo lưu lượng NDPE Kometer

Size

10A (3/8") - 500A (20")

Process Connection

Flange type - KS / JIS / ANSI / ASME / DIN Std. Taper Pipe Thread type (PT)

Measured Fluid

Gas and Liquid

Flow Ranges

Water - 0.1 ㎥/h ~ 2500 ㎥/h
Air - 0.8 N㎥/h ~ 24000 N㎥/h

Range Ability

10 : 1

Accuracy

±2.0 % F.S (Option ±1.0 % F.S)

Fluid Temperature

Max 120 ℃ (Option 350 ℃)

Ambient Temperature

-10 ℃ ~ 60 ℃

Max. Pressure

Max. 20 kgf/㎠.G (Option 50 kgf/㎠.G)

Power Supply

DC 24 V (2-Wire)

Output

DC 4-20 mA

4. Kích thước lưu lượng kế Kometer NDPE

size		Water (m3/h)	Air (Nm3/h)	Flange	Screw
10A	3/8 B	0.05 - 0.5	0.4 - 4	350 벤츄리관	70
15A	1/2 B	0.1 - 1.0	1 - 10	350	70
20A	3/4 B	0.25 - 2.5	2.5 - 25	FLOW 350	70
25A	1 B	0.5 - 5	5 - 50	350	70
32A	1-1/4 B	1 - 10	6 - 60	350	70
40A	1-1/2 B	1.5 - 15	10 - 100	350	74
50A	2 B	2.5 - 25	20 - 200	350	85
65A	2-1/2 B	3.5 - 35	30 - 300	350	100
80A	3 B	5 - 50	40 - 400	350	100
100A	4 B	8 - 80	80 - 800	350	-
125A	5 B	12.5 - 125	125 -1250	350	-
150A	6 B	20 - 200	170 -1700	350	-
200A	8 B	30 - 300	280 - 2800	400	-
250A	10 B	50 - 500	500 - 5000	400	-
300A	12 B	80 - 800	780 - 7800	400	-
350A	14 B	100 - 1000	950 - 9500	400	-
400A	16 B	150 - 1500	1450 - 14500	400	-
450A	18 B	200 - 2000	1900 - 19000	400	-
500A	20 B	250 - 2500	2400 - 24000	400	-

tim

Description

Material

Transmitter

ADC12

3-Way Valve

304SS

316SS

Orifice Body

SS400

304SS

316SS

Orifice

304SS

316SS

DP Seal

316SS

Model Code

N D P E

□

Specification

Flow rate + DC 4-20 mA

Flow rate, Totalizer + DC 4-20 mA, Pulse

Ex - proof

The post Đồng hồ đo lưu lượng NDPE Kometer | NDPE Differential Pressure Flowmeter Kometer appeared first on cuahangtudonghoa.com.

DPE-S-PT Đồng hồ đo lưu lượng chênh lệch Kometer | DPE-S-PT Differential Pressure Flow meter Kometer

cuahangtudonghoa — 2019-08-18 12:30:16

DPE-S-PT là máy đo lưu lượng chênh áp, có thể kiểm tra tốc độ dòng chảy tạm thời và tốc độ dòng chảy tích hợp tại vị trí bằng cách sử dụng bộ truyền áp suất chênh lệch được lắp đặt vào ống.

Công Ty TNHH TM và DV Tăng Minh Phát là đại lý phân phối Differential Pressure Flowmeter Kometer tại Việt Nam

DPE-S-PT Differential Pressure Flow meter Kometer

1. Mô tả DPE-S-PT đồng hồ đo lưu lượng chênh lệch Kometer

DPE-S-PT is a differential pressure flow meter which can check the momentary flow rate and the integrated flow rate at the site using differential pressure transmitter installed into the orifice body. Able to transmit the flow rate signal to the outside for checking, it can be controlled while interlocked with several peripheral devices.

DPE-S-PT Kometer can be applied to almost all industrial sites including chemicals, oil and gas, power plants, metal processing, etc. Also, it can keep a high accuracy at a site where the temperature and pressure inside the piping is not constant, for the temperature and pressure is automatically compensated.

2. Đặc điểm DPE-S-PT Differential Pressure Flow meter

• Automatic correction of temperature and pressure
• Applicable to most of fluids
• Can be used for high temperature and pressure fluids and their piping conditions
• Momentary flow and integrated flow can be easily checked on the monitor
• High precision even under fluctuating temperature and pressure conditions
• The output signal can be linked with various devices
• Can be freely installed horizontally and vertically
• Can be manufactured with a small diameter up to a large diameter

3. Thông số kỹ thuật đồng hồ đo lưu lượng chênh lệch DPE-S-PT Kometer

Size				10A (3/8") - 500A (20")
Process Connection				Flange type - KS / JIS / ANSI / ASME / DIN Std. Taper Pipe Thread type (PT)
Measured Fluid				Gas and Liquid
Flow Ranges				Water - 0.1 ㎥/h ~ 2500 ㎥/h Air - 0.8 N㎥/h ~ 24000 N㎥/h
Range Ability				10 : 1
Accuracy				±2.0 % F.S (Option ±1.0 % F.S)
Fluid Temperature				Max 120 ℃ (Option 350 ℃)
Ambient Temperature				-10 ℃ ~ 60 ℃
Max. Pressure				Max. 20 kgf/㎠.G (Option 50 kgf/㎠.G)
Power Supply				AC 110/220 V (50~60 Hz)
Display				4 Lines LCD Mass Flow, Volume Flow in Standard Condition, Totalizer, Velocity, Time
Output				DC 4-20 mA, Pulse, RS485 and HART, Contact (High, Low)

4. Size lưu lượng kế chênh áp DPE-S-PT Kometer

10A	3/8 B	0.05 - 0.5	0.4 - 4	350	70
15A	1/2 B	0.1 - 1.0	1 - 10	350	70
20A	3/4 B	0.25 - 2.5	2.5 - 25	350	70
25A	1 B	0.5 - 5	5 - 50	350	70
32A	1-1/4 B	1 - 10	6 - 60	350	70
40A	1-1/2 B	1.5 - 15	10 - 100	350	74
50A	2 B	2.5 - 25	20 - 200	350	85
65A	2-1/2 B	3.5 - 35	30 - 300	350	100
80A	3 B	5 - 50	40 - 400	350	100
100A	4 B	8 - 80	80 - 800	350	-
125A	5 B	12.5 - 125	125 -1250	350	-
150A	6 B	20 - 200	170 -1700	350	-
200A	8 B	30 - 300	280 - 2800	400	-
250A	10 B	50 - 500	500 - 5000	400	-
300A	12 B	80 - 800	780 - 7800	400	-
350A	14 B	100 - 1000	950 - 9500	400	-
400A	16 B	150 - 1500	1450 - 14500	400	-
450A	18 B	200 - 2000	1900 - 19000	400	-
500A	20 B	250 - 2500	2400 - 24000	400	-

The post DPE-S-PT Đồng hồ đo lưu lượng chênh lệch Kometer | DPE-S-PT Differential Pressure Flow meter Kometer appeared first on cuahangtudonghoa.com.

KTR-550-F-SA Đồng hồ đo lưu lượng turbine Kometer | Turbine Flowmeter Kometer KTR-550-F-SA

cuahangtudonghoa — 2019-08-18 10:38:22

KTR-550-F-SA là máy đo lưu lượng tuabin được thiết kế đặc biệt để sử dụng trong thực phẩm, đồ uống và dược phẩm...

Công Ty TNHH TM và DV Tăng Minh Phát là đại lý phân phối Turbine Flowmeter Kometer tại Việt Nam

KTR-550-F-SA Kometer Đồng hồ đo lưu lượng turbine

1. Mô tả KTR-550-F-SA Kometer Turbine Flowmeter

KTR-550-F-SA is a specially designed turbine flow meter for being used in foods, drinks, and pharmaceutical fields. It has been specially designed so that it can be kept in a clean and aseptic condition with no crevice, cracked space, or sanitary defect. Because its driving part is mechanical, it can be applied for all fluids of low temperature to high temperature with relatively high accuracy and excellent reproducibility.

Turbine Flowmeter KTR-550-F-SA can be applied to alcohol, toluene, etc. which are not electrically conductive. And it can be used in high-tech hygienic facilities, foods and drinks industry, pharmaceutical industry, etc. However, it is recommended to not use for fluids containing sludge or highly viscous fluids. Also, it can be manufactured in sanitary clamp type, sanitary male type and with varied standard hygiene end connection as well to cope with various piping conditions.

>>> Xem thêm Flowmeter Kometer <<<

2. Đặc tính KTR-550-F-SA đồng hồ đo lưu lượng Kometer

• CE - LVD(2014/35/EC), EMC(2014/30/EU), RoHS(2011/65/EU)
• Specific installation length and various sanitary connection options available
• Selectable Sanitary Clamp or Sanitary Male type
• Relatively low cost
• DC / AC power type or battery type is selectively available
• Wide range of application to fluids at low temperature to high temperature
• Capable of providing outputs of varied signals outward
• Can be freely installed horizontally and vertically
• Can be manufactured from small to large diameter

3. Thông số kỹ thuật lưu lượng kế turbine KTR-550-F-SA

Size

10A (0.5S) - 80A (3S)

Process Connection

Tri-Clamp Ferrule

Flow Ranges

Water - 0.04 ㎥/h ~ 100 ㎥/h

Accuracy

±0.5 % F.S (Option ±0.2 % F.S)

Fluid Temperature

-20 ℃ ~ 120 ℃ (Option -200 ℃ ~ 450 ℃)

Ambient Temperature

-25 ℃ ~ 60 ℃

Max. Pressure

Under 1S - Max. 350 kgf/㎠.G
More than 1-1/2S - Max. 60 kgf/㎠.G

Power Supply

AC 220 V / DC 24 V / 3.6 V battery

Display

3-1/2 LCD (Flow rate), 7 Digit LCD (Integration)

Output

DC 4-20 mA, Pulse
RS-485, Contact 2P High, Low

Protection Class

Ex d IIC T5 / IP67

4. Kích thước đồng hồ đo lưu lượng Kometer KTR-550-F-SA

Size

L
(mm)

Flow ranges
(m3/h)

10A

0.5S

100

0.12 – 1.2

15A

1S
~
1-1/2S

0.3 – 4

20A

0.6 – 6

25A

110

0.6 – 10

32A

1-1/2S

140

1.5 – 15

40A

140

1.5 – 20

50A

2S-1/2S

150

2 – 40

65A

200

5 – 60

80A

5 – 100

5. Vật liệu thiết kế KTR-550-F-SA lưu lượng kế turbine

Indicator

ADC12

Pickup case

ADC12

Body

304SS

316SS

Rotor

CD4MCH

Rotor shaft

TUNGSTEN CARBIDE

316LSS

Support

304SS

316SS

Bushing

TUNGSTEN CARBIDE

HIGH DENSITY PLASTIC

Retaining ring

304SS

316SS

6. Model Code máy đo lưu lượng tuabin KTR-550-F-SA

K T R - 5 5 0

□

Specification

Output DC 4-20 mA without Indicator

AD 110/220V or DC 24V (4-Wire) type with Indicator

3.6 V battery type with Indicator

Connection - Sanitary Clamp

Connection - Sanitary Male

KTR-550-S-SA

KTR-550-F-SA

KTR-550-MF-SA

KTR-550-S-ST

KTR-550-F-ST

KTR-550-MF-ST

The post KTR-550-F-SA Đồng hồ đo lưu lượng turbine Kometer | Turbine Flowmeter Kometer KTR-550-F-SA appeared first on cuahangtudonghoa.com.

KTR-550 Turbine Flowmeter Kometer | Lưu lượng kế KTR-550 Kometer

cuahangtudonghoa — 2019-08-18 09:59:31

KTR-550 là đồng hồ đo lưu lượng tuabin có màn hình hiển thị tốc độ dòng chảy. KTR-550 có thể được áp dụng cho tất cả các chất lỏng ở nhiệt độ thấp đến nhiệt độ cao với độ chính xác tương đối cao.
Công Ty TNHH TM và DV Tăng Minh Phát là đại lý phân phối Flowmeter Kometer tại Việt Nam

KTR-550 Turbine Flowmeter Kometer

1. Mô tả lưu lượng kế KTR-550 Kometer

KTR-550-F-F is a turbine flow meter having a mechanical section combined with electronic board displaying the flow rate, the end connection of which is finished with a flange. Because its driving part is mechanical, it can be applied for all fluids of low temperature to high temperature with relatively high accuracy and excellent reproducibility.

>>> Xem thêm Flowmeter Kometer <<<

Turbine Flowmeter KTR-550 can be applied to alcohol, toluene, etc. which are not electrically conductive. And it can be used also in oil and gas, power plants, pharmaceutical and pulp & paper-making industry. However, it is recommended to not use for fluids containing sludge or highly viscous fluids. Also, it can be provided in flange type or screw (male or female) type while being able to cope with various piping conditions.

2. Đặc điểm, tính chất máy đo lưu lượng KTR-550 Kometer

• CE - LVD(2014/35/EC), EMC(2014/30/EU), RoHS(2011/65/EU)

• Flange type or screw (male or female) type is selectively available.

• Relatively low cost

• DC / AC power type or battery type is selectively available

• Wide range of application to fluids at low

temperature to high temperature

• Applicable to varied fluids such as liquids, gases, etc.

• Capable of providing outputs of varied signals outward

• Can be freely installed horizontally and vertically

• Can be manufactured from small to large diameter

3. Thông số kỹ thuật KTR-550 đồng hồ đo lưu lượng tuabin Kometer

Size

6A (1/4") - 250A (10")

Process Connection

Flange type - KS / JIS / ANSI / ASME / DIN Std. Taper Pipe Thread type (PT)

Measured Fluid

Gas and Liquid

Flow Ranges

Water - 0.04 ㎥/h ~ 1000 ㎥/h
Air - 0.7 N㎥/h ~ 500 N㎥/h

Accuracy

±0.5 % F.S (Option ±0.2 % F.S)

Fluid Temperature

-20 ℃ ~ 120 ℃ (Option -200 ℃ ~ 450 ℃)

Ambient Temperature

-25 ℃ ~ 60 ℃

Max. Pressure

Under 1B - Max. 350 kgf/㎠.G More than 1-1/2B - Max. 60 kgf/㎠.G

Power Supply

AC 220 V / DC 24 V / 3.6 V battery

Display

3-1/2 LCD (Flow rate), 7 Digit LCD (Integration)

Output

DC 4-20 mA, Pulse
RS-485, Contact 2P High, Low

Explosion Proof Class

Ex d IIC T5

Ingress Protection Grade

IP67

4. Model Code KTR-550 Turbine Flowmeter Kometer

K T R - 5 5 0

□

Specification

Output DC 4-20 mA without Indicator

AD 110/220V or DC 24V (4-Wire) type with Indicator

3.6 V battery type with Indicator

Connection - Flange Type

Connection - Screw Type (Male, Female)

KTR-550-S-F

KTR-550-F-F

KTR-550-MF-F

KTR-550-S-T

KTR-550-F-T

KTR-550-MF-T

5. Kích thước lưu lượng kế KTR-550

Size

L
(mm)

Flow ranges

Water(m3/h)

Air(Nm3/h)

1/8B

150

0.04 – 0.4

–

1/4B

150

0.06 – 0.6

–

10A

3/8B

150

0.12 – 1.2

–

15A

1/2B

150

0.3 – 4

0.7 – 7

20A

3/4B

150

0.6 – 6

–

25A

150

0.6 – 10

4 – 40

32A

1-1/4B

150

1.5 – 15

–

40A

1-1/2B

150

1.5 – 20

8 – 80

50A

150

2 – 40

16 – 160

65A

2-1/2B

200

5 – 60

–

80A

200

5 – 100

34 – 340

100A

220

15 – 200

50 – 500

125A

250

25 - 250

–

150A

300

30 – 300

–

200A

360

50 – 500

–

6. Vật liệu thiết kế KTR-550 Flowmeter Kometer | máy đo lưu lượng KTR-550

No.

Description

Material

Normal

Option

Indicator

ADC12

Pickup case

ADC12

Body

304SS

316SS

Rotor

CD4MCH

Rotor shaft

TUNGSTEN CARBIDE

316LSS

Support

304SS

316SS

Bushing

TUNGSTEN CARBIDE

HIGH DENSITY PLASTIC

Retaining ring

304SS

316SS

The post KTR-550 Turbine Flowmeter Kometer | Lưu lượng kế KTR-550 Kometer appeared first on cuahangtudonghoa.com.

Displacement Flowmeter KTP-500 | Lưu lượng kế KTP-500 Kometer

cuahangtudonghoa — 2019-08-15 13:30:35

Công Ty TNHH TM và DV Tăng Minh Phát là đại lý phân phối Displacement Flow meter Kometer tại Việt Nam

Lưu lượng kế KTP-500 Kometer

1. Mô tả đồng hồ đo lưu lượng KTP-500 Kometer

KTP-500 volume flow meter of oval gear type for a ultra small flow rate, measures the flow by continuously running 2 elliptical gears using the energy of the fluid.

Measures flow rate by repeating fluid inflow to and outflow from a fixed volume container and calculating the number of inflows and outflows per unit time and the volume of the container. Measures flow rate not in an indirect manner of using fluid speed or pressure but in a direct manner of using the volume, which has a high accuracy of measurement.

2. Đặc tính lưu lượng kế KTP-500 Kometer

• Capable of measuring a variety of fluids including water, oil, and chemicals

• Pulse (Hall Effect, Reed Switch) output type

• Suitable for corrosive fluids or for a high temperature

• No need for a straight piping section

• Possible to measure highly viscous fluids

• High accuracy of measurement and capability of measuring minute flow rates

• Customized piping installation length

3. Thông số kỹ thuật đồng hồ đo lưu lượng KTP-500

Size				6A (1/4")
Process Connection				Taper Pipe Thread type (PT)
Flow Ranges				Over 5 cP : 20 L/h ~ 500 L/h (Option 15 L/h ~ 500 L/h)
Accuracy				±0.5 % F.S
Fluid Temperature				Max. 120 ℃
Ambient Temperature				-25 ℃ ~ 60 ℃
Max. Pressure				Max. 20 kgf/㎠.G (Option 350 kgf/㎠.G)
Max. Viscosity				1000 Centipoise
Pulse per Liter				400
Display				LCD Display with Backlight (Flow rate, Totalizer)
Output				Pulse (Hall effect sensor or Reed switch)
Mesh Strainer Size				200 MESH
Dimensions				50 x 50 mm

Displacement Flowmeter KTP-5000-F

Displacement Flowmeter KTP-3000-F

Displacement Flowmeter KTPA-2000-F

Displacement Flowmeter KTP-500

Displacement Flowmeter KTP-100

The post Displacement Flowmeter KTP-500 | Lưu lượng kế KTP-500 Kometer appeared first on cuahangtudonghoa.com.

KTPA-2000-F Displacement Flow Meter Kometer | Đồng hồ đo lưu lượng KTPA-2000-F

cuahangtudonghoa — 2019-08-15 09:33:42

Công Ty TNHH TM và DV Tăng Minh Phát là đại lý phân phối Displacement Flow meter Kometer tại Việt Nam

KTPA-2000-F Displacement Flow Meter Kometer

1. Mô tả lưu lượng kế KTPA-2000 Kometer

KTPA-2000-F volume flow meter of oval gear type for a small flow rate, measures the flow by continuously running 2 elliptical gears using the energy of the fluid.
Measures flow rate by repeating fluid inflow to and outflow from a fixed volume container and calculating the number of inflows and outflows per unit time and the volume of the container. Measures flow rate not in an indirect manner of using fluid speed or pressure but in a direct manner of using the volume, which has a high accuracy of measurement.

2. Đặc điểm đồng hồ đo lưu lượng KTPA-2000 Kometer

• Capable of measuring a variety of fluids including water, oil, and chemicals

• Flange type or screw type can be selected

• DC / AC power type or battery type is selectively available

• No need for a straight piping section

• Possible to measure highly viscous fluids

• High accuracy of measurement and capability of measuring minute flow rates

• Customized piping installation length

3. Thông số kỹ thuật KTPA-2000 Flow Meter Kometer

Size

25A (1") - 50A (2")

Process Connection

Flange type - KS / JIS / ANSI / ASME / DIN Std. Taper Pipe Thread type (PT)

Flow Ranges

6 L/min ~ 350 L/min

Accuracy

±0.5 % F.S

Repeatability

0.03 %

Fluid Temperature

Max. 80 ℃

Ambient Temperature

-25 ℃ ~ 60 ℃

Max. Pressure

Max. 20 kgf/㎠.G

Max. Viscosity

1000 Centipoise

Power Supply

AC 220 V / DC 24 V / 3.6 V battery

Display

LCD Display with Backlight (Flow rate, Totalizer)

Output

DC 4-20 mA, Pulse

4. Model Code KTPA-2000-F Flow Meter Kometer

K T P A- 2 0 0 0

□

Specification

Pulse type without Indicator

AD 110/220V or DC 24V (4-Wire) type with Indicator

3.6 V battery type with Indicator

Connection - Flange Type

Connection - Screw Type

KTPA-2000-S-F

KTPA-2000-S-T

KTPA-2000-F-F

KTPA-2000-F-T

KTPA-2000-M-F

KTPA-2000-M-T

Displacement Flowmeter KTP-5000-F

Displacement Flowmeter KTP-3000-F

Displacement Flowmeter KTPA-2000-F

Displacement Flowmeter KTP-500

Displacement Flowmeter KTP-100

The post KTPA-2000-F Displacement Flow Meter Kometer | Đồng hồ đo lưu lượng KTPA-2000-F appeared first on cuahangtudonghoa.com.

Đồng hồ đo lưu lượng KTP-3000 Kometer | KTP-3000 Displacement Flowmeter Kometer

cuahangtudonghoa — 2019-08-15 08:49:17

Công Ty TNHH TM và DV Tăng Minh Phát là đại lý phân phối Displacement Flowmeter Kometer tại Việt Nam

Đồng hồ đo lưu lượng KTP-3000

1. Giới thiệu lưu lượng kế KTP-3000 Kometer

KTP-3000 volume flow meter of oval gear type for a small flow rate, measures the flow by continuously running 2 elliptical gears using the energy of the fluid.
Measures flow rate by repeating fluid inflow to and outflow from a fixed volume container and calculating the number of inflows and outflows per unit time and the volume of the container. Measures flow rate not in an indirect manner of using fluid speed or pressure but in a direct manner of using the volume, which has a high accuracy of measurement.

2. Đặc điểm Flowmeter KTP-3000 Kometer

• Capable of measuring a variety of fluids including water, oil, and chemicals

• Flange type or screw type can be selected

• DC / AC power type or battery type is selectively available

• No need for a straight piping section

• Possible to measure highly viscous fluids

• High accuracy of measurement and capability of measuring minute flow rates

• Customized piping installation length

3. Thông số kỹ thuật đồng hồ đo lưu lượng KTP-3000

Size

15A (1/2") - 50A (2")

Process Connection

Flange type - KS / JIS / ANSI / ASME / DIN Std. Taper Pipe Thread type (PT)

Flow Ranges

Excess 5cP - 2 L/min ~ 350 L/min
Under 5cP - 3 L/min ~ 300 L/min

Accuracy

±0.5 % F.S

Repeatability

0.03 %

Fluid Temperature

Max. 120 ℃ (Option 200 ℃)

Ambient Temperature

-25 ℃ ~ 60 ℃

Max. Pressure

Max. 20 kgf/㎠.G (Option 55 kgf/㎠.G)

Max. Viscosity

1000 Centipoise

Power Supply

AC 220 V / DC 24 V / 3.6 V battery

Display

LCD Display with Backlight (Flow rate, Totalizer)

Output

DC 4-20 mA, Pulse

4. Kích thước lưu lượng kế KTP-3000 Kometer

Connector Size

L(mm)

Flange

Screw

15A

1/2B

180

95/140

25A

220

170

40A

1-1/2B

250

200

50A

280

230

Vật liệu thiết kế KTP-3000

No.

Description

Material

Indicator

ADC12

Body

316SS

Gear

316SS

5. Model Code KTP-3000 Displacement Flowmeter

K T P - 3 0 0 0

□

Specification

Pulse type without Indicator

AD 110/220V or DC 24V (4-Wire) type with Indicator

3.6 V battery type with Indicator

Connection - Flange Type

Connection - Screw Type

KTP-3000-S-F

KTP-3000-S-T

KTP-3000-F-F

KTP-3000-F-T

KTP-3000-M-F

KTP-3000-M-T

Displacement Flowmeter KTP-5000-F

Displacement Flowmeter KTP-3000-F

Displacement Flowmeter KTPA-2000-F

Displacement Flowmeter KTP-500

Displacement Flowmeter KTP-100

The post Đồng hồ đo lưu lượng KTP-3000 Kometer | KTP-3000 Displacement Flowmeter Kometer appeared first on cuahangtudonghoa.com.

Displacement Flowmeter KTP-5000-F | Lưu lượng kế KTP-5000-F Kometer Việt Nam

cuahangtudonghoa — 2019-08-14 19:57:11

Công Ty TNHH TM và DV Tăng Minh Phát là đại lý phân phối Displacement Flowmeter Kometer tại Việt Nam

Displacement Flowmeter KTP-5000-F Kometer

1. Mô tả Flowmeter KTP-5000-F Kometer

KTP-5000-F volume flow meter of roots blower type, measures flow rate by continuously running a pair of gears which are shaped to peanuts.
Measures flow rate by repeating fluid inflow to and outflow from a fixed volume container and calculating the number of inflows and outflows per unit time and the volume of the container. Measures flow rate not in an indirect manner of using fluid speed or pressure but in a direct manner of using the volume, which has a high accuracy of measurement.

2. Đặc tính kỹ thuật đồng hồ đo lưu lượng KTP-5000-F Kometer

• Capable of measuring a variety of fluids including water, oil, and chemicals

• Flange type or screw type can be selected

• DC / AC power type or battery type is selectively available

• More resistant to foreign materials compared with common volume flow meter

• No need for a straight piping section

• Possible to measure highly viscous fluids

• High accuracy of measurement and capability of measuring minute flow rates

• Customized piping installation length

3. Thông số kỹ thuật lưu lượng kế KTP-5000-F Kometer

Size

15A (1/2") - 50A (2")

Process Connection

Flange type - KS / JIS / ANSI / ASME / DIN Std. Taper Pipe Thread type (PT)

Flow Ranges

Excess 5cP - 2 L/min ~ 350 L/min
Under 5cP - 3 L/min ~ 300 L/min

Accuracy

±0.5 % F.S

Repeatability

0.03 %

Fluid Temperature

Max. 150 ℃

Ambient Temperature

-25 ℃ ~ 60 ℃

Max. Pressure

Max. 20 kgf/㎠.G (Option 55 kgf/㎠.G)

Max. Viscosity

1000 Centipoise

Power Supply

AC 220 V / DC 24 V / 3.6 V battery

Display

LCD Display with Backlight (Flow rate, Totalizer)

Output

DC 4-20 mA, Pulse

4. Kích thước lưu lượng kế KTP-5000-F

Connector Size		Dimensions (mm)
		L	D	H	h1	h2	A
15A	1/2 B	200	120	140	41	99	77
20A	3/4 B	200	120	140	41	99	77
25A	1 B	200	120	150	46	104	82
32A	1-1/4 B	250	140	170	56	114	92
40A	1-1/2 B	250	150	200	71	129	107
50A	2 B	300	170	230	86	144	122

5. Model Code Flowmeter KTP-5000

KTP-5000-S-F

KTP-5000-S-T

KTP-5000-F-F

KTP-5000-F-T

KTP-5000-M-F

KTP-5000-M-T

Displacement Flowmeter KTP-5000-F

Displacement Flowmeter KTP-3000-F

Displacement Flowmeter KTPA-2000-F

Displacement Flowmeter KTP-500

Displacement Flowmeter KTP-100

The post Displacement Flowmeter KTP-5000-F | Lưu lượng kế KTP-5000-F Kometer Việt Nam appeared first on cuahangtudonghoa.com.

Thermal Mass Flowmeter KMSG-9000MI Kometer | Kometer Viet Nam

cuahangtudonghoa — 2019-08-14 17:19:51

Công Ty TNHH TM và DV Tăng Minh Phát là đại lý phân phối lưu lượng kế nhiệt Kometer tại Việt Nam

Flow meter KMSG-9000MI Kometer

1. Mô tả lưu lượng kế KMSG-9000MI Kometer

KMSG-9000MI has been specially manufactured with driving part and indication part showing the flow rate separated. Flow meter with top-notch technology integrated is suitable for sites with especially highly difficult condition or difficult access.

KMSG-9000MI having no driving part is excellent in durability with a long life and able to provide a much larger flow ratio (200:1) than mechanical flow meters. And it is suitable to piping where the field conditions are not stable because the temperature and pressure is automatically compensated.

2. Đặc tính kỹ thuật đồng hồ đo lưu lượng KMSG-9000MI

• Measures mass flow rate using two temperatur sensors

• Temperature & Pressure are automatically calibrated

• High accuracy and excellent reproducibility

• Applicable to most of gases

• Varied materials can be used for the sensor

• Wide range of measurement (200: 1)

• No maintenance is necessary because there are no driving parts, impediments, or wear.

• Applicable to various piping environment

• Can be used with driving part and indicating part separated

• Explosion Proof Certification : Ex d IIC T5 / IP67)

3. Thông số kỹ thuật Flowmeter KMSG-9000MI

Size

10A (3/8") - 4000A (160")

Process Connection

Insertion Type

Flow Velocity

0.1 Nm/s ~ 100 Nm/s

Measured Flow

Most of Gas

Accuracy

±0.5 % F.S

Fluid Temperature

-40 ℃ ~ 220 ℃

Ambient Temperature

-20 ℃ ~ 45 ℃

Max. Pressure

1.6 MPa

Power Supply

AC 85-250 V (50~60) Hz
DC 24 V

Display

4 Lines LCD
Mass Flow, Volume Flow in Standard Condition, Totalizer, Velocity, Time

Output

DC 4-20 mA, Pulse, RS485 and HART, Contact (High, Low)

Explosion Proof Grade

Ex d IIC T5

Ingress Protection Grade

IP 67

4. MODEL CODE Thermal Mass Flowmeter KMSG-9000MI

K M S G

□□□

□□

Specification

010
~
800

Connection Size (KMSG-8000MT Series)
10A ~ 800A

In-Line Type

Insertion Type

Ex d IIC T5
IP 67

5. Thiết kế lưu lượng kế KMSG-9000MI

No.

Descriction

Material

Indicator

ADC 12T

Top Connector

316SS

Safety ring

304SS

316SS

Bottom Connector

316SS

Valve

304SS

316SS

Socket

304SS

316SS

Probe

316SS

Themal Sensor

316SS

Body (In-line)

304SS

316SS

5. Kích thước đồng hồ đo lưu lượng KMSG-9000MI

Connection size		(L)Length	(H)Height
10A	3/8 B	350	236
15A	1/2 B	350	240
20A	3/4 B	350	243
25A	1 B	350	247
32A	1-1/4 B	350	251
40A	1-1/2 B	350	254
50A	2 B	350	260
65A	2-1/2 B	350	268
80A	3 B	350	274
100A	4 B	350	287
125A	5 B	350	300
150A	6 B	350	312
200A	8 B	400	338
250A	10 B	400	363
300A	12 B	400	389
350A	14 B	400	407
400A	16 B	400	433
450A	18 B	400	458
500A	20 B	400	484
550A	22 B	-	509
600A	24 B	-	534
650A	26 B	-	560
700A	28 B	-	585
750A	30 B	-	611
800A	32 B	-	636

Thermal Mass Flowmeter KMSG-8000MT

Thermal Mass Flowmeter KMSG-8000MI

Thermal Mass Flowmeter KMSG-9000MT

Thermal Mass Flowmeter KMSG-9000MI

The post Thermal Mass Flowmeter KMSG-9000MI Kometer | Kometer Viet Nam appeared first on cuahangtudonghoa.com.

Lưu lượng kế KMSG-9000MT Kometer | Thermal Mass Flowmeter KMSG-9000MT Kometer

cuahangtudonghoa — 2019-08-14 16:58:51

Công Ty TNHH TM và DV Tăng Minh Phát là đại lý phân phối lưu lượng kế nhiệt Kometer tại Việt Nam

Thermal Mass Flowmeter KMSG-9000MT Kometer

1. Mô tả lưu lượng kế KMSG-9000MT Kometer

KMSG-9000MT has been specially manufactured with driving part and indication part showing the flow rate separated. Flow meter with top-notch technology integrated is suitable for sites with especially highly difficult condition or difficult access.

KMSG-9000MT having no driving part is excellent in durability with a long life and able to provide a much larger flow ratio (200:1) than mechanical flow meters. And it is suitable to piping where the field conditions are not stable because the temperature and pressure is automatically compensated.

2. Đặc điểm, tính năng đồng hồ đo lưu lượng KMSG-9000MT Kometer

• Measures mass flow rate using two temperature sensors

• Temperature & Pressure are automatically calibrated

• High accuracy and excellent reproducibility

• Applicable to most of gases

• Varied materials can be used for the sensor

• Wide range of measurement (200: 1)

• No maintenance is necessary because there are

no driving parts, impediments, or wear.

• Customized piping installation length

• Can be used with driving part and indicating part separated

• Explosion Proof Certification : Ex d IIC T5 / IP67)

3. Thông số kỹ thuật Flowmeter KMSG-9000MT Kometer

Size

10A (3/8") - 800A (32")

Process Connection

Flange type - Standard JIS10K RF
(Option. KS 10K, ANSI 150#, DIN 16 bar)

Flow Velocity

0.1 Nm/s ~ 100 Nm/s

Measured Flow

Most of Gas

Accuracy

±0.5 % F.S

Fluid Temperature

-40 ℃ ~ 220 ℃

Ambient Temperature

-20 ℃ ~ 45 ℃

Max. Pressure

1.6 MPa

Power Supply

AC 85-250 V (50~60) Hz
DC 24 V

Display

4 Lines LCD
Mass Flow, Volume Flow in Standard Condition, Totalizer, Velocity, Time

Output

DC 4-20 mA, Pulse, RS485 and HART, Contact (High, Low)

Explosion Proof Grade

Ex d IIC T5

Ingress Protection Grade

IP 67

4. Vật liệu thiết kế lưu lượng kế KMSG-9000MT

No.

Descriction

Material

Indicator

ADC 12T

Top Connector

316SS

Safety ring

304SS

316SS

Bottom Connector

316SS

Valve

304SS

316SS

Socket

304SS

316SS

Probe

316SS

Themal Sensor

316SS

Body (In-line)

304SS

316SS

5. Kích thước flow meter KMSG-9000MT

Connection size		(L)Length	(H)Height
10A	3/8 B	350	236
15A	1/2 B	350	240
20A	3/4 B	350	243
25A	1 B	350	247
32A	1-1/4 B	350	251
40A	1-1/2 B	350	254
50A	2 B	350	260
65A	2-1/2 B	350	268
80A	3 B	350	274
100A	4 B	350	287
125A	5 B	350	300
150A	6 B	350	312
200A	8 B	400	338
250A	10 B	400	363
300A	12 B	400	389
350A	14 B	400	407
400A	16 B	400	433
450A	18 B	400	458
500A	20 B	400	484
550A	22 B	-	509
600A	24 B	-	534
650A	26 B	-	560
700A	28 B	-	585
750A	30 B	-	611
800A	32 B	-	636

6. Model đồng hồ đo lưu lượng KMSG-9000MT

K M S G

□□□

□□

Specification

010
~
800

Connection Size (KMSG-8000MT Series)
10A ~ 800A

In-Line Type

Insertion Type

Ex d IIC T5
IP 67

Thermal Mass Flowmeter KMSG-8000MT

Thermal Mass Flowmeter KMSG-8000MI

Thermal Mass Flowmeter KMSG-9000MT

Thermal Mass Flowmeter KMSG-9000MI

The post Lưu lượng kế KMSG-9000MT Kometer | Thermal Mass Flowmeter KMSG-9000MT Kometer appeared first on cuahangtudonghoa.com.

Đồng hồ đo lưu lượng KMSG-8000MI Kometer | Thermal Mass Flowmeter KMSG-8000MI Kometer

cuahangtudonghoa — 2019-08-14 16:39:25

Công Ty TNHH TM và DV Tăng Minh Phát là đại lý phân phối lưu lượng kế nhiệt Kometer tại Việt Nam

Đồng hồ đo lưu lượng KMSG-8000MI Kometer

1. Mô tả Flowmeter KMSG-8000MI Kometer

KMSG-8000MI is so designed that it can be applied/used onto existing piping regardless of the pipe size. The product does not need any additional piping design for convenience in use, does not have any driving part, and causes a small pressure loss.

KMSG-8000MI having no driving part is excellent in durability with a long life and able to provide a much larger flow ratio (200:1) than mechanical flow meters. And it is suitable to piping where the field conditions are not stable because the temperature and pressure is automatically compensated.

2. Đặc tính kỹ thuật lưu lượng kế KMSG-8000MI Kometer

Size

10A (3/8") - 4000A (160")

Process Connection

Insertion Type

Flow Velocity

0.1 Nm/s ~ 100 Nm/s

Measured Flow

Most of Gas

Accuracy

±0.5 % F.S

Fluid Temperature

-40 ℃ ~ 220 ℃

Ambient Temperature

-20 ℃ ~ 45 ℃

Max. Pressure

1.6 MPa

Power Supply

AC 85-250 V (50~60) Hz / 20 W DC 24 V

Display

4 Lines LCD
Mass Flow, Volume Flow in Standard Condition, Totalizer, Velocity, Time

Output

DC 4-20 mA, Pulse, RS485 and HART, Contact (High, Low)

Explosion Proof Grade

Ex d IIC T5

Ingress Protection Grade

IP 67

3. Thiết kế đồng hồ đo lưu lượng KMSG-8000MI

No.

Descriction

Material

Indicator

ADC 12T

Top Connector

316SS

Safety ring

304SS

316SS

Bottom Connector

316SS

Valve

304SS

316SS

Socket

304SS

316SS

Probe

316SS

Themal Sensor

316SS

Body (In-line)

304SS

316SS

5. Kích thước lưu lượng kế KMSG-8000MI

Connection size		(L)Length	(H)Height
10A	3/8 B	350	236
15A	1/2 B	350	240
20A	3/4 B	350	243
25A	1 B	350	247
32A	1-1/4 B	350	251
40A	1-1/2 B	350	254
50A	2 B	350	260
65A	2-1/2 B	350	268
80A	3 B	350	274
100A	4 B	350	287
125A	5 B	350	300
150A	6 B	350	312
200A	8 B	400	338
250A	10 B	400	363
300A	12 B	400	389
350A	14 B	400	407
400A	16 B	400	433
450A	18 B	400	458
500A	20 B	400	484
550A	22 B	-	509
600A	24 B	-	534
650A	26 B	-	560
700A	28 B	-	585
750A	30 B	-	611
800A	32 B	-	636

6. Model flow meter KMSG-8000MI

K M S G

□□□

□□

Specification

010
~
800

Connection Size (KMSG-8000MT Series)
10A ~ 800A

In-Line Type

Insertion Type

Ex d IIC T5 (방폭구조)
IP 67 (방수 / 방진구조)

Thermal Mass Flowmeter KMSG-8000MT

Thermal Mass Flowmeter KMSG-8000MI

Thermal Mass Flowmeter KMSG-9000MT

Thermal Mass Flowmeter KMSG-9000MI

The post Đồng hồ đo lưu lượng KMSG-8000MI Kometer | Thermal Mass Flowmeter KMSG-8000MI Kometer appeared first on cuahangtudonghoa.com.

Thermal Mass Flowmeter KMSG-8000MT | Lưu lượng kế nhiệt KMSG-8000MT Kometer

cuahangtudonghoa — 2019-08-14 15:55:57

Công Ty TNHH TM và DV Tăng Minh Phát là đại lý phân phối lưu lượng kế nhiệt Kometer tại Việt Nam

Flowmeter KMSG-8000MT Kometer

1. Giới thiệu lưu lượng kế KMSG-8000MT Kometer

KMSG-8000MT is a thermal mass flow meter specially designed for measuring flow rate in processes using gas as fluid. Flow meter with top-notch technology integrated is suitable for use in the field where especially high accuracy and varied self-diagnosis is required.

KMSG-8000MT having no driving part is excellent in durability with a long life and able to provide a much larger flow ratio (200:1) than mechanical flow meters. And it is suitable to piping where the field conditions are not stable because the temperature and pressure is automatically compensated.

2. Thông số kỹ thuật Flow meter KMSG-8000MT

Size

10A (3/8") - 800A (32")

Process Connection

Flange type - Standard JIS10K RF
(Option. KS 10K, ANSI 150#, DIN 16 bar)

Flow Velocity

0.1 Nm/s ~ 100 Nm/s

Measured Flow

Most of Gas

Accuracy

±0.5 % F.S

Fluid Temperature

-40 ℃ ~ 220 ℃

Ambient Temperature

-20 ℃ ~ 45 ℃

Max. Pressure

1.6 MPa

Power Supply

AC 85-250 V (50~60) Hz / 20 W DC 24 V

Display

4 Lines LCD
Mass Flow, Volume Flow in Standard Condition, Totalizer, Velocity, Time

Output

DC 4-20 mA, Pulse, RS485 and HART, Contact (High, Low)

Explosion Proof Grade

Ex d IIC T5

Ingress Protection Grade

IP 67

3. Model Thermal Mass Flowmeter KMSG-8000MT

K M S G

□□□

□□

Specification

010
~
800

Connection Size (KMSG-8000MT Series)
10A ~ 800A

In-Line Type

Insertion Type

Ex d IIC T5 (방폭구조)
IP 67 (방수 / 방진구조)

4. Vật liệu thiết kế đồng hồ đo lưu lượng KMSG-8000MT

No.

Descriction

Material

Indicator

ADC 12T

Top Connector

316SS

Safety ring

304SS

316SS

Bottom Connector

316SS

Valve

304SS

316SS

Socket

304SS

316SS

Probe

316SS

Themal Sensor

316SS

Body (In-line)

304SS

316SS

5. Kích thước lưu lượng kế KMSG-8000MT

Connection size		(L)Length	(H)Height
10A	3/8 B	350	236
15A	1/2 B	350	240
20A	3/4 B	350	243
25A	1 B	350	247
32A	1-1/4 B	350	251
40A	1-1/2 B	350	254
50A	2 B	350	260
65A	2-1/2 B	350	268
80A	3 B	350	274
100A	4 B	350	287
125A	5 B	350	300
150A	6 B	350	312
200A	8 B	400	338
250A	10 B	400	363
300A	12 B	400	389
350A	14 B	400	407
400A	16 B	400	433
450A	18 B	400	458
500A	20 B	400	484
550A	22 B	-	509
600A	24 B	-	534
650A	26 B	-	560
700A	28 B	-	585
750A	30 B	-	611
800A	32 B	-	636

Thermal Mass Flowmeter KMSG-8000MT

Thermal Mass Flowmeter KMSG-8000MI

Thermal Mass Flowmeter KMSG-9000MT

Thermal Mass Flowmeter KMSG-9000MI

The post Thermal Mass Flowmeter KMSG-8000MT | Lưu lượng kế nhiệt KMSG-8000MT Kometer appeared first on cuahangtudonghoa.com.

Coriolis Mass Flowmeter KMS-2000 | Lưu lượng kế KMS-2000 Kometer

cuahangtudonghoa — 2019-08-11 12:31:14

Công Ty TNHH TM và DV Tăng Minh Phát là đại lý phân phối đồng hồ đo lưu lượng Kometer tại Việt Nam

Thông tin đồng hồ đo lưu lượng KMS-2000 Kometer tại hãng

Data Sheet KMS-2000

Lưu lượng kế KMS-2000 Kometer

1. Mô tả ngắn về đồng hồ đo lưu lượng KMS-2000 Kometer

KMS-2000 is a standard type high performance Coriolis mass flow meter to be used for process industry. The flow meter, having two curved tubes installed, provides excellent performance and high accuracy practically in all applications.

This product enables to continuously measure mass flow, volume flow, density, and temperature even under difficult process conditions. The flow meter, multifariously approved for use in dangerous places, provides varied standard hygienic connections to be used in foods and drinks industry in addition to basic flange connection.

KMS-2000 a Coriolis mass flow meter of lowest cost and highest efficiency while providing a high flow ratio (500:1), can be basically used in various industries with gas and liquid flows and is excellent in durability with a long life thanks to no driving part present.

Coriolis Mass Flowmeter KMS-2000 Kometer

Coriolis Mass Flowmeter KMS-2000 (6A) Kometer

Coriolis Mass Flowmeter KMS-2000 (15A) Kometer

Coriolis Mass Flowmeter KMS-2000 (25A) Kometer

Coriolis Mass Flowmeter KMS-2000 (40A) Kometer

Coriolis Mass Flowmeter KMS-2000 (50A) Kometer

Coriolis Mass Flowmeter KMS-2000 (80A) Kometer

Coriolis Mass Flowmeter KMS-2000 (100A) Kometer

2. Tính năng lưu lượng kế KMS-2000 Kometer

• Design with two curved tubes

• With temperature measurement integrated (with a temperature sensor built in)

• Highly accurate measurement of mass, density and volume

• Applicable to most of gases, liquids and slurry fluids

• Superb stability, accuracy and reproducibility with low flow rate

• Wide range of measurement (500: 1)

• High measurement reliability of liquid ± 0.1% (R.D), gas ± 0.5% (R.D)

• Customized piping installation length

• Explosion Proof Certification : Ex d IIC T5 / IP67

3. Thông số kỹ thuật đồng hồ đo lưu lượng KMS-2000 Kometer

Model Code

KMS-2000 6A

Tube Inner Diameter

6 mm

Process Connection

Flange type - Standard JIS10K RF (Option. ANSI 150#, DIN 16 bar)

Measuring Range

18 kg/min

Measured Flow

Liquid, Gas, Slurry

Liquid Accuracy

±0.15 % Reading Scale (Rangeability 1:10)

±0.3 % Reading Scale (Rangeability 1:20)

Gas Accuracy

±0.5 % Reading Scale

Density Accuracy

±0.002 g/cm3

Fluid Temperature

-200 ℃ ~ 200 ℃

Temperature Accuracy

±1.0 ℃ ±0.5 % Reading Scale

Max. Pressure

25 MPa

Loss of Pressure

≤ 0.2 MPa

Zero Stability

0.04 kg/h

Repeatability

0.05 %

Power Supply

AC 85-250 V (50~60) Hz
DC 24 V – (Option)

Power Consumption

15 VA

Display

OLED Display
Flowrate : Mass / Volume Flowrate, Flow Total, Density, Temperature

Output

Analog : DC 4-20 mA / Pulse

Digital : RS-485 Modbus RTU

Explosion Proof Grade

Ex d IIC T5

Ingress Protection Grade

IP 67

4. Kích thước lưu lượng kế KMS-2000

Shape	Size		Flow Range (kg/h)		Dimensions (mm)
			Min.	Max.	A	B	C
Triangle Type	6A	1/4B	10	1200	200	205	240
	15A	1/2B	15	3000	240	265	295
	25A	1B	24	12000	210	450	460
	40A	1-1/2B	60	30000	261	560	570
U-Type	50A	2B	120	60000	556	620	495
	80A	3B	300	150000	830	970	501
	100A	4B	480	240000	997	1032	832

5. Vật liệu chế tạo Flowmeter KMS-2000 Kometer

No.	Description	Material
		Normal	Option
1	Indicator	CAST ALUMINUM
2	Junction Box	CAST ALUMINUM
3	Flange	SUS304	316SS / 316LSS
4	Tube	316SS
5	Housing	SUS304

The post Coriolis Mass Flowmeter KMS-2000 | Lưu lượng kế KMS-2000 Kometer appeared first on cuahangtudonghoa.com.

Vortex Flowmeter KTV-700 | Lưu lượng kế KTV-700 Kometer

cuahangtudonghoa — 2019-08-10 21:49:32

Công Ty TNHH TM và DV Tăng Minh Phát chuyên cung cấp đồng hồ đo lưu lượng Kometer tại Việt Nam

Data sheet KTV-700 Series

Thông tin chính hãng KTV-700

Vortex Flowmeter KTV-700

1. Mô tả Lưu lượng kế KTV-700 Kometer

KTV-700 is most suitable for measuring flow rate of fluids, dry or wet gas, saturated or superheated steam while maintaining a high accuracy even with fluids at a high temperature.
This product is applicable to industrial sites such as oil or gas fields, power plants, pharmaceutical, pulp, and paper-making plants while maintaining excellent durability and a long life with no driving part needed.

2. Đặc điểm Vortex Flowmeter KTV-700 Kometer

• Installation and maintenance costs are lower than those of other products

• Flange type or space-saving wafer type is selectively available

• Reduce Tube Size compared to Connection Size

• Excellent durability and long life thanks to no driving part present

• Applicable to varied fluids such as liquids, gases, steam, etc.

• Wide range of flow measurement and relatively low pressure loss

3. Thông số kỹ thuật Flowmeter KTV-700 Kometer

Size

15A (1/2") - 300A (12")

Process Connection

Flange type - Standard JIS10K RF (Option. ANSI 150#, DIN 16 bar)
Wafer type

Measuring Range

Water - 0.7 m3/h – 1800 m3/h
Gas - 3.5 Nm3/h – 11000 Nm3/h

Accuracy

±1.0 % F.S (Option ±0.5 %)

Fluid Temperature

-40 ℃ ~ 250 ℃ (Option 350 ℃)

Ambient Temperature

-25 ℃ ~ 60 ℃

Max Pressure

20 kgf/㎠.G (Option 40 kgf/㎠.G)

Power Supply

DC 24 V (2-Wire)

Display

LCD Display (Flowrate, Totalizer, Temperature, Pressure)

Output

DC 4-20 mA, Pulse (Option RS-485)

Protection Class

Ex d IIC T5 / IP67

4. Bản vẽ kích thước Lưu lượng kế KTV-700 Kometer

Size		L	H1	H2
mm	inch
15	1/2"	200	200	195
20	3/4"	200
25	1"	200
40	1-1/2"	200
50	2"	200
65	2-1/2"	200	220
80	3"	200
100	4"	250	240
125	5"	250	250
150	6"	300	260
200	8"	350	300
250	10"	400	320
300	12"	500	340

5. Vật liệu thiết kế Vortex Flowmeter KTV-700 Kometer

No.

Descriction

Material

Flange

304SS

316SS

Body

304SS

316SS

Bar

304SS

Indicator

CAST ALUMINUM

Flow Sensor

304SS

316SS

6. Các loại đồng hồ đo lưu lượng KTV Kometer

Lưu lượng kế KTV-700 Kometer

The post Vortex Flowmeter KTV-700 | Lưu lượng kế KTV-700 Kometer appeared first on cuahangtudonghoa.com.

Electromagnetic Flowmeter KTMI-700 Kometer | Lưu lượng kế KTMI-700 Kometer

cuahangtudonghoa — 2019-08-10 21:01:25

Công Ty TNHH TM và DV Tăng Minh Phát chuyên cung cấp đồng hồ đo lưu lượng Kometer tại Việt Nam

Data sheet KTMI-700 Series

Thông tin chính hãng KTMI-700

Electromagnetic Flowmeter KTMI-700 Kometer

1. Mô tả về Flowmeter KTMI-700

KTMI-700 electromagnetic flow meter of pipe-inserting type, is so designed that it can be applied/used onto existing piping regardless of the pipe size. The product does not need any additional piping design, does not have any driving part, and causes a small pressure loss.

The feature of this product is that it can be used without any additional change in the piping arrangement when it is hard to modify the piping in current use. It can be applied to various industrial fields including water and sewage, agriculture, etc.

KTMI-700 having no driving part is excellent in durability with a long life and able to provide a much larger flow ratio (100:1). Moreover, it can be used in a place with a high level of vibration and noise. And its maintenance is easy and simple.

2. Ưu điểm lưu lượng kế KTMI-700

• Its design with a light weight enables to easily install in a narrow place.
• No maintenance is necessary because no driving parts, mpediments, or wear.
• Applicable to various piping environment
• High durability to most of corrosive or abrasive fluids
• Able to apply various electrodes to the sensor
• Provides superb stability and accuracy for a long time
• Maintains a stable accuracy even at a site with a high level of noise and vibration

3. Thông số kỹ thuật Electromagnetic Flowmeter KTMI-700

Size			100A - 3000A
Process Connection			Insertion Type (Required Fitting)
Measuring Velocity			0.1 m/s – 10 m/s
Flow Velocity			0.3 m/s – 10 m/s
Accuracy			±0.5 % F.S (0.3 m/s ~ 10 m/s) ±1.0 % F.S (0.01 m/s ~ 0.3 m/s)
Ambient Temperature			-10 ℃ ~ 60 ℃
Conductivity			Over 5 ㎲ / ㎝
Power Supply			AC 85-250 V (50~60) Hz DC 24 V – (Option)
Power Consumption			15 VA
Display			LCD Display Flowrate : 5-digit Display Total : 9-digit Display / With Back light
Output			Analog : DC 4-20 mA Pulse : DC (8~30) V (Open collector pulse)
			Digital : RS-485
Protection Class			IP67

4. Hình vẽ Flowmeter KTMI-700

5. Vật liệu thiết kế Lưu lượng kế KTMI-700 Kometer

No.	Description	Material
		Normal	Option
1	Indicator	CAST ALUMINUM
2	Handle	SUS304	316SS, 316LSS
3	Fixing Screws	SUS304	316SS, 316LSS
4	Pipe Connector	SUS304	316SS, 316LSS
5	Probe	SUS304	316SS, 316LSS
6	Electrode	316LSS	Platinum Titanium Tantalum Hasteloy-C

The post Electromagnetic Flowmeter KTMI-700 Kometer | Lưu lượng kế KTMI-700 Kometer appeared first on cuahangtudonghoa.com.

Electromagnetic Flowmeter KTM-100 | Kometer Viet Nam

cuahangtudonghoa — 2019-08-10 20:38:38

Lưu lượng kế điện từ KTM-100 Kometer có kích thước nhỏ ngọn.

Chi tiết KTM-100 tại hãng Kometer

Data sheet KTM-100

Electromagnetic Flowmeter KTM-100

1. Mô tả flowmeter KTM-100 Kometer:

KTM-100 is an electromagnetic flow meter specially manufactured to be of small dimension so that it can be easily applied in a narrow space for installation. With no indicating part provided, flow rate is found using the output of 4~20 mA or a flow monitor.

This product can replace the flow meter of paddle wheel type when measuring waste water or contaminated fluid. Also, it is good for facilities with small flow rate and can continuously measure flows in a wide range of areas.

KTM-100, having no driving part, is excellent in durability with a long life, easy to maintain, and superb in cost performance ratio.

2. Đặc tính Flowmeter KTM-100

Its design with a light weight enables to easily install in a narrow place.
No maintenance is necessary because no driving parts, mpediments, or wear.
Special design suitable for measuring small flow rates
High durability to most of corrosive or abrasive fluids
Provides superb stability and accuracy for a long time
Maintains a stable accuracy even at a site with a high level of noise and vibration
Specific installation length and various sanitary connection options available

3. Thông số kỹ thuật Electromagnetic Flowmeter KTM-100

Size			DN 2 - DN 25
Process Connection			PT
Measuring Range			0.1 L/min – 300 L/min
Flow Velocity			0.3 m/s – 10 m/s
Accuracy			±1.0 % F.S
Ambient Temperature			-10 ℃ ~ 60 ℃
Conductivity			Over 5 ㎲ / ㎝
Power Supply			DC 24 V (3 -Wire)
Output			Frequency / DC 4-20 mA
Body Material			Aluminium

Electromagnetic Flowmeter KTM-100

The post Electromagnetic Flowmeter KTM-100 | Kometer Viet Nam appeared first on cuahangtudonghoa.com.

Electromagnetic Flowmeter KTMS-500 Kometer | Kometer Việt Nam

cuahangtudonghoa — 2019-08-10 19:26:42

Công Ty TNHH TM và DV Tăng Minh Phát chuyên cung cấp đồng hồ đo lưu lượng Kometer tại Việt Nam

Data sheet KTMS-500 Series

Thông tin chính hãng KTMS-500

Electromagnetic Flowmeter KTMS-500 Kometer

1. Mô tả Đồng hồ đo lưu lượng KTMS-500

KTMS-500 is an electromagnetic flow meter for sanitary arrangements in food industry. It has been specially designed so that it can be kept in a clean and aseptic condition with no crevice, cracked space, or sanitary defect and can be used even for low conductivity fluids.

2. Đặc điểm, tính chất lưu lượng kế KTMS-500 Kometer

Capable of measuring flows in both directions
No maintenance is necessary because no driving parts, mpediments, or wear.
PFA or PTFE liners with high chemically durability is used
High durability to most of corrosive or abrasive fluids
Provides superb stability and accuracy for a long time
Housing material can be chosen
Maintains a stable accuracy even at a site with a high level of noise and vibration
Suitable for fluids with high solid content such as pieces of fruit and vegetable
Specific installation length and various sanitary connection options available

3. Thông số kỹ thuất đồng hồ đo lưu lượng KTMS-500

Size

10A (0.5 S) - 80A (3 S)

Process Connection

Tri- Clamp Ferrule

Measuring Range (Velocity)

0.005 m3/h – 180.0 m3/h (0.1 m/s – 10 m/s)

Flow Velocity

0.3 m/s – 10 m/s

Accuracy

±0.5 % R.D (0.3 m/s ~ 10 m/s)
±1.0 % R.D (0.01 m/s ~ 0.3 m/s)

Fluid Temperature

PTFE (-10 ℃ ~ 160 ℃) Hard rubber (-10 ℃ ~ 70 ℃)
CR (-10 ℃ ~ 150 ℃) - Option

Ambient Temperature

-10 ℃ ~ 60 ℃

Conductivity

Over 5 ㎲ / ㎝

Power Supply

AC 85-250 V (50~60) Hz
DC 24 V – (Option)

Power Consumption

15 VA

Display

LCD Display
Flowrate : 5-digit Display
Total : 9-digit Display / With Back light

Output

Analog : DC 4-20 mA
Pulse : DC (8~30) V (Open collector pulse)

Digital : RS-485

Protection Class

IP67

Electromagnetic Flowmeter KTMS-500

The post Electromagnetic Flowmeter KTMS-500 Kometer | Kometer Việt Nam appeared first on cuahangtudonghoa.com.

Lưu lượng kế KTM-800-Ex Kometer | Flowmeter KTM-800-Ex Kometer

cuahangtudonghoa — 2019-08-10 17:47:58

Công Ty TNHH TM và DV Tăng Minh Phát chuyên cung cấp đồng hồ đo lưu lượng Kometer tại Việt Nam

Data sheet KTM-800-Ex

Thông tin chính hãng KTM-800-Ex

Lưu lượng kế KTM-800-Ex Kometer

1. Mô tả đồng hồ đo lưu lượng KTM-800-Ex:

KTM-800-Ex is an electromagnetic flow meter which is used specially at sites having explosive atmosphere or risk of it for preventing gas explosion. Flow meter with safety certification based on explosion-proof design can be applied in a place having a risk of explosion.

2. Đặc điểm lưu lượng kế KTM-800-Ex:

Capable of measuring flows in both directions
No maintenance is necessary because no driving parts, mpediments, or wear.
PFA or PTFE liners with high chemically durability is used
High durability to most of corrosive or abrasive fluids
Able to apply various electrodes to the sensor
Provides superb stability and accuracy for a long time
Housing material can be chosen
Maintains a stable accuracy even at a site with a high level of noise and vibration
Explosion Proof Certification : Ex d IIB T4

3. Thông số chung Flowmeter KTM-800-Ex Kometer

Size

10A (3/8") - 2000A (80")

Process Connection

Flange type - Standard JIS10K RF (Option. ANSI 150#, DIN 16 bar)

Measuring Range

0.028 m3/h – 113040.0 m3/h

Flow Velocity

0.1 m/s – 10 m/s

Accuracy

±0.5 % R.D (0.3 m/s ~ 10 m/s)
±1.0 % R.D (0.01 m/s ~ 0.3 m/s)

Fluid Temperature

PTFE (-10 ℃ ~ 160 ℃) Hard rubber (-10 ℃ ~ 70 ℃)
CR (-10 ℃ ~ 150 ℃) - Option

Ambient Temperature

-10 ℃ ~ 60 ℃

Conductivity

Over 5 ㎲ / ㎝

Power Supply

AC 85-250 V (50~60) Hz
DC 24 V – (Option)
Battery (Option), Battery Life 2 year

Power Consumption

15 VA

Display

LCD Display
Flowrate : 5-digit Display
Total : 9-digit Display / With Back light

Output

Analog : DC 4-20 mA
Pulse : DC (8~30) V (Open collector pulse)

Digital : RS-485

Protection Class

Ex d IIB T4

Electromagnetic Flowmeter KTM-800-Ex Kometer

The post Lưu lượng kế KTM-800-Ex Kometer | Flowmeter KTM-800-Ex Kometer appeared first on cuahangtudonghoa.com.

Đồng hồ đo lưu lượng KTM-900 Kometer | Electromagnetic Flowmeter KTM-900 Kometer

cuahangtudonghoa — 2019-08-10 17:17:57

Công Ty TNHH TM và DV Tăng Minh Phát chuyên cung cấp đồng hồ đo lưu lượng Kometer tại Việt Nam

Data sheet KTM-900

Thông tin chính hãng KTM-900

Electromagnetic Flowmeter KTM-900 Kometer

1. Mô tả đồng hồ đo lưu lượng KTM-900:

KTM-900 has been specially manufactured with driving part and indication part showing the flow rate separated for occasions when it is hard to check flow rate at a site. Flow meter with top-notch technology integrated is suitable for use in the field where especially high accuracy and varied self-diagnosis are required.

2. Đặc tính lưu lượng kế KTM-900:

Capable of measuring flows in both directions
No maintenance is necessary because no driving parts, mpediments, or wear.
PFA or PTFE liners with high chemically durability is used
High durability to most of corrosive or abrasive fluids
Able to apply various electrodes to the sensor
Provides superb stability and accuracy for a long time
Housing material can be chosen
Maintains a stable accuracy even at a site with a high level of noise and vibration
Driving part and the Indicating part can be used separately

3. Thông số kỹ thuật chung đồng hồ đo lưu lượng KTM-900 Kometer:

Size

10A (3/8") - 2000A (80")

Process Connection

Flange type - Standard JIS10K RF (Option. ANSI 150#, DIN 16 bar)

Measuring Range

0.028 m3/h – 113040.0 m3/h

Flow Velocity

0.1 m/s – 10 m/s

Accuracy

±0.5 % R.D (0.3 m/s ~ 10 m/s)
±1.0 % R.D (0.01 m/s ~ 0.3 m/s)

Fluid Temperature

PTFE (-10 ℃ ~ 160 ℃) Hard rubber (-10 ℃ ~ 70 ℃)
CR (-10 ℃ ~ 150 ℃) - Option

Ambient Temperature

-10 ℃ ~ 60 ℃

Conductivity

Over 5 ㎲ / ㎝

Power Supply

AC 85-250 V (50~60) Hz
DC 24 V – (Option)
Battery (Option), Battery Life 2 year

Power Consumption

15 VA

Display

LCD Display
Flowrate : 5-digit Display
Total : 9-digit Display / With Back light

Output

Analog : DC 4-20 mA
Pulse : DC (8~30) V (Open collector pulse)

Digital : RS-485

Electrode Signal Cable

Standard length 10 m (Max. 30 m)

Electromagnetic Flowmeter KTM-900

5. Các sản phẩm KTM khác:

Đồng hồ đo lưu lượng KTM-800 KOMETER

Đồng hồ đo lưu lượng KTMI-700 KOMETER

Đồng hồ đo lưu lượng KTM-900 KOMETER

Đồng hồ đo lưu lượng KTMS-500 KOMETER

Đồng hồ đo lưu lượng KTM-100 KOMETER

Đồng hồ đo lưu lượng KTM-800-EX KOMETER

The post Đồng hồ đo lưu lượng KTM-900 Kometer | Electromagnetic Flowmeter KTM-900 Kometer appeared first on cuahangtudonghoa.com.

Thiết bị đo lưu lượng bằng siêu âm GSA-500P, KOMETER VIỆT NAM

cuahangtudonghoa — 2019-04-05 14:58:38

Công Ty TNHH TM và DV Tăng Minh Phát là nhà phân phối chính thức của hãng KOMETER tại Việt Nam.

Thông tin Máy đo lưu lượng GSA-500P Kometer tại hãng

Data sheet GSA-500P

Ultrasonic Flowmeter GSA-500P Kometer

1. Mô tả ngắn về lưu lượng kế GSA-500P Kometer

GSA-500P Kometer panel type ultrasonic flow meter for liquids having an ultrasound sensor mounted outside the piping, is a highly precise measuring instrument with a high accuracy and a high reproducibility.

It is applicable to a wide range of piping diameter from 15A to 6000A and suitable to control and apply depending on user environment based on special design enabling at the site to not only inspect and indicate integrating flow measured but also output various kinds of signals outward.

GSA-500 measures the flow externally without cutting the pipe, so it can be very easily installed initially or moved later on and it is convenient for installing without having to shut off the flow. Moreover, it can be used in a place with a high level of vibration and noise. And its maintenance is easy and simple.

2. Đặc điểm, tính chất Flowmeter GSA-500P Kometer

• Capable of measuring a variety of fluids including water, oil, and chemicals

• Application of ceramic sensor resistant to corrosion and high temperature.

• No piping cut required

• Capable of measuring fluids with low flow rate and low flow speed

• Low failure rate and no pressure loss thanks to no driving parts present

• Provides superb stability and accuracy for a long time

• Capable of providing outputs of varied signals outward

• Capable of measuring small to large flow rate

3. Thông số kỹ thuật lưu lượng kế GSA-500P

Size

15A - 6000A

Repeatability

≤0.2 %

Fluid

Most of Liquid

Accuracy

±1.0 % F.S

Fluid Temperature

-40 ℃ ~ 160 ℃

Ambient Temperature

-40 ℃ ~ 80 ℃

Max. Pressure

10 kgf/㎠.G

Power Supply

AC 220 V / DC 24 V

Display

LCD Display (Flowrate, Totalizer, Flow Velocity, Total Time etc.)

Output

DC 4-20 mA, OCT Output, Relay

4. Model Code Ultrasonic Flowmeter GSA-500P Kometer

Output

DC 4-20 mA, OCT Output, Relay

G S A - 5 0 0 P

□

Specification

Small pipe / 15A ~ 100A

Medium Piping / 50A ~ 1000A

Large piping / 300A ~ 6000A

GSA-500P-ST

GSA-500P-MT

GSA-500P-LT

5. Ultrasonic Flowmeter Kometer

Ultrasonic Flowmeter GSA-250 (Flange Type)

Ultrasonic Flowmeter GSA-250 (Sanitary Type)

Ultrasonic Flowmeter GSA-500 (Clamp on Type)

Ultrasonic Flowmeter GSA-500P

Ultrasonic Flowmeter GSA-100P

Ultrasonic Flowmeter FLUXUS F601 / F608

Ultrasonic Flowmeter FLUXUS G601 / G608

Ultrasonic Flowmeter FLUXUS F/G 721

Ultrasonic Flowmeter FLUXUS F/G 80X Series

Máy đo lưu lượng siêu âm GSA-500P

The post Thiết bị đo lưu lượng bằng siêu âm GSA-500P, KOMETER VIỆT NAM appeared first on cuahangtudonghoa.com.

Máy đo lưu lượng siêu âm GSA-500 KOMETER, KOMETER Việt Nam

cuahangtudonghoa — 2019-04-05 14:49:36

Công Ty TNHH TM và DV Tăng Minh Phát là nhà phân phối chính thức của hãng KOMETER tại Việt Nam.

Ultrasonic Flowmeter GSA-500 Data Sheet

Thông tin máy đo lưu lượng GSA-500 Kometer tại hãng

Ultrasonic Flowmeter GSA-500 Kometer

1. Mô tả máy đo lưu lượng GSA-500 Kometer

GSA-500 KOMETER máy đo lưu lượng siêu âm cho chất lỏng có cảm biến siêu âm được gắn bên ngoài đường ống, là một dụng cụ đo có độ chính xác cao.

GSA-500 đo dòng chảy bên ngoài mà không cần cắt ống, do đó, nó có thể được sử dụng hoặc di chuyển rất dễ dàng và thuận tiện cho việc cài đặt mà không cần phải tắt dòng chảy. Hơn nữa, nó có thể được sử dụng ở một nơi có độ rung và tiếng ồn cao, bảo trì dễ dàng và đơn giản.

2. Đặc điểm nổi bật Ultrasonic Flowmeter GSA-500

• Capable of measuring a variety of fluids including water, oil, and chemicals
• Application of ceramic sensor resistant to corrosion and high temperature.
• No piping cut required
• Capable of measuring fluids with low flow rate and low flow speed
• Low failure rate and no pressure loss thanks to no driving parts present
• Provides superb stability and accuracy for a long time
• Capable of providing outputs of varied signals outward
• Capable of measuring small to large flow rate

3. Thông số kỹ thuật Flowmeter GSA-500

Size

15A - 6000A

Repeatability

≤0.2 %

Fluid

Most of Liquid

Accuracy

±1.0 % F.S

Fluid Temperature

-40 ℃ ~ 160 ℃

Ambient Temperature

-40 ℃ ~ 80 ℃

Max. Pressure

10 kgf/㎠.G

Power Supply

AC 220 V / DC 24 V

Display

LCD Display (Flowrate, Totalizer, Flow Velocity, Total Time etc.)

Output

DC 4-20 mA, OCT Output, Relay

4. Model Code lưu lượng kế GSA-500 Kometer

GSA-500-ST

GSA-500-MT

GSA-500-LT

G S A - 5 0 0

□

Specification

Small pipe / 15A ~ 100A

Medium Piping / 50A ~ 1000A

Large piping / 300A ~ 6000A

5. Kích thước máy đo lưu lượng GSA-500 Kometer

6. Ultrasonic Flowmeter Kometer

Ultrasonic Flowmeter GSA-250 (Flange Type)

Ultrasonic Flowmeter GSA-250 (Sanitary Type)

Ultrasonic Flowmeter GSA-500 (Clamp on Type)

Ultrasonic Flowmeter GSA-500P

Ultrasonic Flowmeter GSA-100P

Ultrasonic Flowmeter FLUXUS F601 / F608

Ultrasonic Flowmeter FLUXUS G601 / G608

Ultrasonic Flowmeter FLUXUS F/G 721

Ultrasonic Flowmeter FLUXUS F/G 80X Series

Ultrasonic Flowmeter GSA-500 Kometer

The post Máy đo lưu lượng siêu âm GSA-500 KOMETER, KOMETER Việt Nam appeared first on cuahangtudonghoa.com.

Ultrasonic Flowmeter GSA-250 (Sanitary Type) KOMETER VIỆT NAM

cuahangtudonghoa — 2019-04-05 14:28:06

Công ty TNHH TM và DV Tăng Minh Phát là đại lý chính hãng KOMETER tại Việt Nam

Thông tin máy đo lưu lượng GSA-250 tại hãng

Data sheet GSA-250

Ultrasonic Flowmeter GSA-250 (Sanitary Type) Kometer

1. Mô tả lưu lượng kế GSA-250 (Sanitary Type)

Máy đo lưu lượng siêu âm GSA-250 KOMETER cho các chất lỏng có cảm biến siêu âm được lắp bên trong đường ống, là một dụng cụ đo có độ chính xác cao, ít hư hỏng và dễ dàng lắp đặt, sửa chữa.

2. Đặc điểm Ultrasonic Flowmeter GSA-250 (Sanitary Type) Kometer

• Capable of measuring a variety of fluids including water, oil, and chemicals

• Application of ceramic sensor resistant to corrosion and high temperature.

• Flange type or clamp type can be selected

• Capable of measuring fluids with low flow rate and low flow speed

• Low failure rate and no pressure loss thanks to no driving parts present

• Low failure rate due to no moving parts and no pressure loss

• Capable of providing outputs of varied signals outward

• Capable of measuring small to large flow rate

3. Thông số kỹ thuật lưu lượng kế GSA-250 Kometer

4. Bản vẽ kích thước máy đo lưu lượng GSA-250 Kometer

5. Vật liệu thiết kế đồng hồ đo lưu lượng GSA-250 Kometer

No.	Description	Material
1	Body	304SS
2	Flange	304SS
3	Bolt, Nut	304SS
4	Indicator	ALUMINUM

6. Ultrasonic Flowmeter Kometer

Ultrasonic Flowmeter GSA-250 (Flange Type)

Ultrasonic Flowmeter GSA-250 (Sanitary Type)

Ultrasonic Flowmeter GSA-500 (Clamp on Type)

Ultrasonic Flowmeter GSA-500P

Ultrasonic Flowmeter GSA-100P

Ultrasonic Flowmeter FLUXUS F601 / F608

Ultrasonic Flowmeter FLUXUS G601 / G608

Ultrasonic Flowmeter FLUXUS F/G 721

Ultrasonic Flowmeter FLUXUS F/G 80X Series

Ultrasonic Flowmeter GSA-250 (Sanitary Type) Kometer

The post Ultrasonic Flowmeter GSA-250 (Sanitary Type) KOMETER VIỆT NAM appeared first on cuahangtudonghoa.com.

Lưu lượng kế siêu âm GSA-250 (Flange Type) KOMETER

cuahangtudonghoa — 2019-04-05 14:10:02

Công ty TNHH TM và DV Tăng Minh Phát là đại lý chính hãng KOMETER tại Việt Nam

Thông tin đồng hồ đo lưu lượng GSA-250 Kometer tại hãng

Data sheet GSA-250

Ultrasonic Flowmeter GSA-250

1. Mô tả lưu lượng kế GSA-250 KOMETER

GSA-250 KOMETER ultrasonic flow meter for liquids having an ultrasound sensor inserted inside the piping, is a highly precise measuring instrument with a high accuracy and a high reproducibility.

It is applicable to a wide range of piping diameter from 15A to 1000A and suitable to control and apply depending on user environment based on special design enabling at the site to not only inspect and indicate integrating flow measured but also output various kinds of signals outward.

GSA-250 having no driving part is excellent in durability with a long life and able to provide a much larger flow ratio (100:1). Moreover, it can be used in a place with a high level of vibration and noise. And its maintenance is easy and simple.

2. Đặc điểm Ultrasonic Flowmeter GSA-250 Kometer

• Capable of measuring a variety of fluids including water, oil, and chemicals

• Application of ceramic sensor resistant to corrosion and high temperature.

• Flange type or clamp type can be selected

• Capable of measuring fluids with low flow rate and low flow speed

• Low failure rate and no pressure loss thanks to no driving parts present

• Low failure rate due to no moving parts and no pressure loss

• Capable of providing outputs of varied signals outward

• Capable of measuring small to large flow rate

3. Thông số kỹ thuật lưu lượng kế GSA-250

Size			15A (1/2") - 1000A (40")
Process Connection			Flange type - Standard JIS10K RF (Option. KS, ANSI 150#, DIN 16 bar)
Fluid			Most of Liquid
Measuring Range			0.063 m3/h – 28260.0 m3/h
Flow Velocity			0.1 m/s – 10 m/s
Accuracy			±1.0 % F.S (Option ±0.5 % F.S)
Fluid Temperature			-40 ℃ ~ 160 ℃
Ambient Temperature			-40 ℃ ~ 80 ℃
Max. Pressure			10 kgf/㎠.G
Power Supply			DC 24 V
Display			LCD Display (Flowrate, Totalizer, Battery Level etc.)
Output			DC 4-20 mA, NEG/POS/NET Totalizer Pulse Two OCT Output, RS-485

4. Bản vẽ kích thước Flowmeter GSA-250 Kometer

Size		Flow Range		Dimensions (mm)
		Flow rate (m3/h)	Flow rate (m3/h)	L	H
15A	1/2B	0.063	6.358	320	285
20A	3/4B	0.113	11.304	360	285
25A	1B	0.176	17.662	390	292
32A	1-1/4B	0.289	28.938	450	292
40A	1-1/2B	0.452	45.216	300	275
50A	2B	0.706	70.65	320	281
65A	2-1/2B	1.194	119.398	360	289
80A	3B	1.808	180.864	250	295
100A	4B	2.82	282.6	280	308
125A	5B	4.41	441.56	300	320
150A	6B	6.35	635.85	320	333
200A	8B	11.3	1130.4	380	359
250A	10B	17.66	1766.25	420	384
300A	12B	25.43	2543.4	460	410
350A	14B	34.61	3461.85	500	428
400A	16B	45.21	4521.6	550	454
450A	18B	57.22	5722.65	600	479
500A	20B	70.6	7065	650	504
600A	24B	101.7	10173.6	750	555
700A	28B	138.4	13847.4	850	606
800A	32B	180.8	18086.4	950	657
900A	36B	228.9	22890.6	1050	708
1000A	40B	282.6	28260	1150	758

5. Vật liệu thiết kế đồng hồ đo lưu lượng GSA-250 Kometer

No.	1	2	3	4	5
Description	Body	Flange	Bolt, Nut	Sensor	Indicator
Material	304SS	304SS	304SS	Ceramics	ABS

6. Ultrasonic Flowmeter Kometer

Ultrasonic Flowmeter GSA-250 (Flange Type)

Ultrasonic Flowmeter GSA-250 (Sanitary Type)

Ultrasonic Flowmeter GSA-500 (Clamp on Type)

Ultrasonic Flowmeter GSA-500P

Ultrasonic Flowmeter GSA-100P

Ultrasonic Flowmeter FLUXUS F601 / F608

Ultrasonic Flowmeter FLUXUS G601 / G608

Ultrasonic Flowmeter FLUXUS F/G 721

Ultrasonic Flowmeter FLUXUS F/G 80X Series

Ultrasonic Flowmeter GSA-250

The post Lưu lượng kế siêu âm GSA-250 (Flange Type) KOMETER appeared first on cuahangtudonghoa.com.

ĐỒNG HỒ ĐO LƯU LƯỢNG KTVP-750 KOMETER | Vortex Flowmeter KTVP-750

cuahangtudonghoa — 2019-04-05 13:37:29

Công ty TNHH TM và DV Tăng Minh Phát là đại lý chính hãng KOMETER tại Việt Nam

Flowmeter KTVP-750

Data sheet KTVP-750

Vortex Flowmeter KTVP-750

1. Mô tả Lưu lượng kế KTVP-750 KOMETER

KTVP-750 KOMETER is a flow meter of eddy-current type with a temperature and a pressure sensor built in. With a temperature and pressure compensating function integrated in flow measuring mechanism in the same body, it can be applied to an environment with the piping in a floating condition in various industrial sites. This product is most suitable for measuring flow rate of fluids, dry or wet gas, saturated or superheated steam while maintaining a high accuracy even with fluids at a high temperature.

KTVP-750 is applicable to industrial sites such as oil or gas fields, power plants, pharmaceutical, pulp, and paper-making plants while maintaining excellent durability and a long life with no driving part needed. It is possible to supply with the tube size reduced compared with the connection size and possible to provide flange type or flangeless wafer type to cope with various piping conditions.

2. Ưu điểm Vortex Flowmeter KTVP-750

• Temperature, pressure, and flow sensors all-in- one product

• Installation and maintenance costs are lower than those of other products

• Flange type or space-saving wafer type is selectively available

• Reduce Tube Size compared to Connection Size

• Excellent durability and long life thanks to no driving part present

• Applicable to varied fluids such as liquids, gases, steam, etc.

• Wide range of flow measurement and relatively low pressure loss

3. Thông số kỹ thuật Flowmeter KTVP-750

Size

15A (1/2") - 300A (12")

Process Connection

Flange type - Standard JIS10K RF (Option. ANSI 150#, DIN 16 bar)
Wafer type

Measuring Range

Water - 0.7 m3/h – 1800 m3/h
Gas - 3.5 Nm3/h – 11000 Nm3/h

Accuracy

±1.0 % F.S (Option ±0.5 %)

Fluid Temperature

-40 ℃ ~ 250 ℃ (Option 350 ℃)

Ambient Temperature

-25 ℃ ~ 60 ℃

Max Pressure

20 kgf/㎠.G (Option 40 kgf/㎠.G)

Power Supply

DC 24 V (2-Wire)

Display

LCD Display (Flowrate, Totalizer, Temperature, Pressure)

Output

DC 4-20 mA, Pulse (Option RS-485)

Protection Class

Ex d IIC T5 / IP67

4. Hình vẽ KTVP-750

5. Kích thước đồng hồ lưu lượng KTVP 750

Size		L	H1	H2
mm	inch
15	1/2"	200	200	195
20	3/4"	200
25	1"	200
40	1-1/2"	200
50	2"	200
65	2-1/2"	200	220
80	3"	200
100	4"	250	240
125	5"	250	250
150	6"	300	260
200	8"	350	300
250	10"	400	320
300	12"	500	340

6. Vật liệu Flowmeter KTVP-750

Flange

304SS

316SS

Body

304SS

316SS

Bar

304SS

Press' Sensor Housing

304SS

316SS

Indicator

CAST ALUMINUM

Flow & Temp' Sensor

304SS

316SS

Press' Tube

316SS

Valve

304SS

NORMAL FLOW RANGES

Size		Water (m3/h)	Gas (Nm3/h)
mm	inch	Water (m3/h)	*1 atm / 20℃ 기준
15	1/2"	0.7 - 7	3.5 - 35
20	3/4"	1 - 10	5 - 50
25	1"	1.6 - 16	7 - 70
40	1-1/2"	2.5 - 25	22 - 220
50	2"	3.5 - 35	32 - 320
65	2-1/2"	6.8 - 68	48 - 480
80	3"	10 - 100	64 - 640
100	4"	15 - 150	110 - 1100
125	5"	27.5 - 275	170 - 1700
150	6"	40 - 400	224 - 2240
200	8"	80 - 800	496 - 4960
250	10"	120 - 1,200	800 - 8000
300	12"	180 - 1,800	1100 - 11000

GAS FLOW RANGES

Size		Max. Flow ranges (Nm3/h) (1 atm/20 ℃)
mm	inch	1 kg/cm2.G	2 kg/cm2.G	4 kg/cm2.G	6 kg/cm2.G	8 kg/cm2.G	10 kg/cm2.G
15	1/2"	80	110	180	250	310	380
20	3/4"	110	150	250	350	440	540
25	1"	150	210	350	480	620	760
40	1-1/2"	440	650	1080	1510	1930	2360
50	2"	630	950	1570	2190	2810	3420
65	2-1/2"	950	1420	2350	3270	4200	5130
80	3"	1270	1890	3130	4360	5600	6840
100	4"	2170	3240	5370	7500	9620	11750
125	5"	3350	5000	8290	11580	14870	18160
150	6"	4420	6580	10920	15260	19590	23930
200	8"	9770	14570	24170	33770	43370	52970
250	10"	15750	23490	38980	54470	69950	85440
300	12"	21650	32300	53590	74890	96180	117470

SATURATED STEAM FLOW RANGES

Size		Max. Flow ranges (kg/h)
mm	inch	1 kg/cm2.G	2 kg/cm2.G	4 kg/cm2.G	6 kg/cm2.G	8 kg/cm2.G	10 kg/cm2.G
15	1/2"	39	57	92	126	160	194
20	3/4"	55	81	131	180	229	277
25	1"	78	113	183	252	320	387
40	1-1/2"	244	357	577	792	1005	1217
50	2"	355	519	839	1152	1462	1771
65	2-1/2"	532	778	1258	1728	2194	2656
80	3"	710	1037	1677	2304	2925	3542
100	4"	1220	1783	2883	3960	5027	6087
125	5"	1885	2756	4456	6120	7769	9408
150	6"	2484	3631	5871	8064	10237	12396
200	8"	5501	8040	13000	17856	22667	27449
250	10"	8872	12968	20968	28800	36560	44272
300	12"	12199	17831	28831	39600	50270	60874

7. Các loại đồng hồ đo lưu lượng KTV Kometer

Vortex Flowmeter KTVP-750

The post ĐỒNG HỒ ĐO LƯU LƯỢNG KTVP-750 KOMETER | Vortex Flowmeter KTVP-750 appeared first on cuahangtudonghoa.com.

Đồng hồ đo lưu lượng KTM-800 KOMETER

cuahangtudonghoa — 2019-04-05 13:05:37

Công ty TNHH TM và DV Tăng Minh Phát là đại lý chính hãng KOMETER tại Việt Nam

DATA SHEET KTM 800 Series

Thông tin KTM-800 tại hãng KOMETER

FLOW METER KTM-800 KOMETER

1. Mô tả đồng hồ đo lưu lượng KTM-800 Kometer

Electromagnetic Flowmeter KTM-800 là máy đo lưu lượng điện từ được thiết kế đặc biệt để đo tốc độ dòng chảy trong quá trình sử dụng chất lỏng. Đồng hồ đo lưu lượng với công nghệ đỉnh cao được tích hợp phù hợp để sử dụng trong lĩnh vực đòi hỏi độ chính xác cao và khả năng tự chẩn đoán đa dạng.
Sản phẩm này thể được áp dụng cho ngành năng lượng nguyên tử, công nghiệp hóa chất và công nghiệp chế biến khác, công nghiệp khoáng sản và khai thác mỏ, và công nghiệp tài nguyên nước, vv và cũng có thể được áp dụng cho các chất lỏng có độ dẫn thấp.

KTM-800 có độ bền tuyệt vời có thể làm việc trong các môi trường khắc nhiệt.

KTM-800 điện từ được tạo ra khi một chất lỏng chảy trong từ trường

Nó dựa trên luật của Faraday rằng nó tỷ lệ thuận với tốc độ dòng chảy. Với độ chính xác cao

Chính xác và bền, nó được sử dụng rộng rãi trong các cơ sở nghiên cứu và các khu công nghiệp.

. Được thực hiện với các thông số kỹ thuật cơ bản phổ quát, độ chính xác đo lường và hợp lý

Nó là một sản phẩm đáp ứng yêu cầu của người dùng về chất lượng.

Thông số kỹ thuật Đồng hồ đo lưu lượng KTM-800 KOMETER

- Độ chính xác và độ tái lập cao

- Tín hiệu dòng là đầu ra kỹ thuật số

- Độ bền tuyệt vời và tuổi thọ cao do không có bộ phận chuyển động

- Phạm vi lưu lượng đo cao và không mất áp suất

Size

10A (3/8") - 2000A (80")

Process Connection

Flange type - Standard JIS10K RF (Option. ANSI 150#, DIN 16 bar)

Measuring Range

0.028 m3/h – 113040.0 m3/h

Flow Velocity

0.1 m/s – 10 m/s

Accuracy

±0.5 % R.D (0.3 m/s ~ 10 m/s)
±1.0 % R.D (0.01 m/s ~ 0.3 m/s)

Fluid Temperature

PTFE (-10 ℃ ~ 160 ℃) Hard rubber (-10 ℃ ~ 70 ℃)
CR (-10 ℃ ~ 150 ℃) - Option

Ambient Temperature

-10 ℃ ~ 60 ℃

Conductivity

5 ㎲ / ㎝ 이상

Power Supply

AC 85-250 V (50~60) Hz
DC 24 V – (Option)
Battery (Option), Battery Life 2 year

Power Consumption

15 VA

Display

LCD Display
Flowrate : 5-digit Display
Total : 9-digit Display / With Back light

Output

Analog : DC 4-20 mA
Pulse : DC (8~30) V (Open collector pulse)

Digital : RS-485

Protection Class

IP67

Electromagnetic Flowmeter KTM-800

2. Các sản phẩm KTM khác:

Electromagnetic Flowmeter KTM-800 Kometer

Electromagnetic Flowmeter KTMI-700 Kometer

Electromagnetic Flowmeter KTM-900 Kometer

Electromagnetic Flowmeter KTMS-500 Kometer

Electromagnetic Flowmeter KTM-800-EX Kometer

Electromagnetic Flowmeter KTM-100 Kometer

The post Đồng hồ đo lưu lượng KTM-800 KOMETER appeared first on cuahangtudonghoa.com.

KOMETER VIỆT NAM, ĐẠI LÝ KOMETER TẠI VIỆT NAM

cuahangtudonghoa — 2019-04-05 09:16:15

Công Ty TNHH TM và DV Tăng Minh Phát là nhà phân phối chính thức của hãng KOMETER tại Việt Nam.

ĐẠI LÝ KOMETER TẠI VIỆT NAM

A. Giới thiệu về hãng Kometer | Kometer Việt Nam

Hãng Kometer chuyên sản xuất đồng hồ đo lưu lượng tại Hàn Quốc, được thành lập vào năm 1991. Kể từ khi thành lập Kometer liên tục dẫn đầu ngành lưu lượng kế với các sản phẩm chất lượng.

Hãng Kometer không ngừng cải thiện chất lượng sản phẩm và phát triển các sản phẩm mới. Các thiết bị Kometer không chỉ được sử dụng tại Hàn Quốc mà được tin dùng khắp nơi trên thế giới.

Công Ty TNHH TM và DV Tăng Minh Phát là nhà cung cấp các thiết bị tự động hóa cho ngành sản xuất công nghiệp.

Đại Lý Kometer Việt Nam chuyên cung cấp Flowmeter Kometer tại thị trường Việt Nam.

B. Flow meter Kometer | Kometer Viet Nam

1. Electromagnetic Flow Meter Kometer | Lưu lượng kế điện từ Kometer

Electromagnetic Flow Meter (Đồng hồ đo lưu lượng kế điện từ)	KTM-800
	KTM-900
	KTM-800-Ex
	KTMS-500
	KTM-100
	KTMI-700

2. Vortex Flowmeter Kometer | Lưu lượng kế xoáy Kometer

Vortex Flowmeter (Đồng hồ đo lưu lượng xoáy)	KTVP-750
	KTVP-750 (Wafer Type)
	KTV-700
	KTV-700 (Wafer Type)

3. Ultrasonic Flowmeter Kometer | Lưu lượng kế siêu âm Kometer

Ultrasonic Flowmeter (Máy đo lưu lượng siêu âm)	GSA-250 (Flange Type)
	GSA-250 (Sanitary Type)
	GSA-500 (Clamp on Type)
	GSA-500P
	GSA-100P
	FLUXUS F601 / F608
	FLUXUS G601 / G608
	FLUXUS F/G 721
	FLUXUS F/G 80X Series

4. Coriolis Mass Flowmeter Kometer | | Lưu lượng kế khối lượng Kometer

Coriolis Mass Flowmeter (Đồng hồ đo lưu lượng khối lượng)	KMS-2000 (6A)
	KMS-2000 (15A)
	KMS-2000 (25A)
	KMS-2000 (40A)
	KMS-2000 (50A)
	KMS-2000 (80A)
	KMS-2000 (100A)

5. Thermal Mass Flowmeter | Lưu lượng kế nhiệt Kometer

Thermal Mass Flowmeter (Lưu lượng kế nhiệt)	KMSG-8000MT
	KMSG-8000MI
	KMSG-9000MT
	KMSG-9000MI

6. Displacement Flowmeter Kometer | Đồng hồ đo lưu lượng thể tích Kometer

Displacement Flowmeter (Đồng hồ đo lưu lượng thể tích)	KTP-5000-F
	KTP-3000-F
	KTPA-2000-F
	KTP-500
	KTP-100

7. Turbine Flowmeter Kometer | Lưu lượng kế tuabin Kometer

Turbine Flowmeter (Đồng hồ đo lưu lượng tuabin)	KTR-550-F-F (Flange Type)
	KTR-550-S-F (분리형)
	KTR-550-MF-F (Battery Type)
	KTR-550-F-T (Screw Type)
	KTR-550-S-T (Screw Type)
	KTR-550-F-SA
	KTR-550-S-SA
	NK-250
	KPP-1000

8. Differential Pressure Flowmeter | Đồng hồ đo lưu lượng chênh lệch Kometer

Differential Pressure Flowmeter (Lưu lượng kế chênh lệch)	DPE-S-PT
	NDPE-S
	DAT
	DAF
	DAC
	DAW
	DAR
	DPI
	FCV
	FCVN
	FV

Venturi Flowmeter	GSAV-4000
Pitot Tube Flowmeter	KFM-301
Flow Monitor	KTR-550B-PT
	KTR-550B
	KTR-550F
	KTR-700FC KOMETER
Metal Tube Rotameter	MGE Series
	MGE-1-S-Ex
	MGE-2-S-Ex
	MGE-3-S-Ex
	MGE-4-S-Ex
	MGE-5-S-Ex
	NMGI Series
	NMGI-1
	NMGI-2
	NMGI-3
	NMGI-4
	NMGI-5
	NMGI-A Series
	NMGI-A-1
	NMGI-A-2
	NMGI-A-3
	NMGI-A-4
	NMGI-A-5
	SMGP Series
	SMGP-1
	SMGP-2
	SMGP-3
	SMGP-4
	N-SMGP Series
	N-SMGP-1
	N-SMGP-2
	MGI Series
	MGI-1-A
	MGI-2-A
	MGI-3-A
	MGI-4-A
	MGI-5-A
	MGIJ Series
	MGIJ-1
	MGIJ-2
	MGP Series
	MGP-1-T
	MGP-2-T
	MGP-3-T
	MGP-4-T
	NMGP Series
	NMGP-1-T
	NMGP-2-T
	NMGP-3-T
	NMGP-4-T
	NMGE-Ex Series
	NMGE-Ex-1
	NMGE-Ex-2
	NMGE-Ex-3
	NMGE-Ex-4
	NMGE-Ex-5
	AMGP Series
	AMGP-A
	AMGP-V
	MGA Series
	MGA-1
	MGA-2
	MGA-3
	MGA-4
	MC Series (Waste Water)
	MC-2
	MC-4
	MC-5
	MG Series
MG-2
MG-4
MG-5
Glass Tube Rotameter	GA-10 Series (Standard Type)
	GA-101
	GA-102
	GA-103
	GA-104
	GA-20 Series (without Guide Axis)
	GA-201
	GA-202
	GA-203
	GA-204
	GA-30 Series (Straight Glass Tube)
	GA-301
	GA-302
	GA-303
	GA-304
	GA-50 Series (Short Type)
	GA-501
	GA-60 Seires (Sanitary Clamp)
	PA-60 Seires (Thin Type)
	PA-601
	PA-602
	PA-603
	PA-604
	GA-70 Series (Horizontality Type)
	GA-70 Series (Horizontality Type)
Panel & Acrylic Rotameter	PA-10 Series (Standard Type)
	PA-20 Series (Low Flowrate)
	PA-30 Series (Compact Type)
	PA-30-S
	PA-30-P
	PA-30-T
	PA-40 Series (Ultra Low Flow)
	PA-50 (Diaphragm)
	NPA-50 Series (Pressure Controller)
	NPA-50-1
	NPA-50-2
	PA-70 Series (Distributor Type)
	PA-80 Series
	PA-80-2
	PA-80-7
	PA-81 Series
	PA-90 Series
	PA-91 Series
	PA-92 Series
Sight Glass & Flow Switch	SG-101
	SG-102
	SG-103
	SG-201
	SG-202
	SG-30 Series (Guideline / Contact 1P)
	SG-40 Series (Guideline / Contect 1P&2P)
	SG-50 Series (Guideline / Contact 1P)
	SG-60 Series (DC Output)
	SPI Series (Oil Distributor)
	SPT Series (Oil Monitor)
	SN Series (with Niddle Valve)
	SI Series (Oil Distributor)
	MGS Series
	FSM Seires
	FSP Series
	FS-1

The post KOMETER VIỆT NAM, ĐẠI LÝ KOMETER TẠI VIỆT NAM appeared first on cuahangtudonghoa.com.