Đồng hồ đo độ cứng Teclock - Hardness Tester Durometer

Hãng:

Teclock

xuất xứ:

JAPAN

Giá bán:

LH-0914981967

Thành phần:

Mới 100%

Mã sản phẩm:

Teclock Việt Nam

Công Ty TNHH TM và DV Tăng Minh Phát là nhà phân phối chính hãng TECLOCK tại Việt Nam

Thông tin sản phẩm
Thông số kỹ thuật

Đồng hồ đo độ cứng Teclock

Hardness Tester Durometer Deep Hole / Long Leg Type

In some cases, such as the measurement surface of uneven or with a narrow flat area and the bottom of deep hollow, it may be impossible to achieve the proper results because of the difficult contact of the presser foot. The Deep Hole (H) type and the Long Leg (L) type make such measurements possible with a small or long presser foot. Both are supplied with Peak Pointer and the upper/lower limiters. The Long Leg type meets also to DIN 53505 standard.

Model	Type	Application / Materials	Conform Standards	Spring Load Value 0-100	Indentor Shape (mm)	Presser Foot Diameter (mm)	Weight (g)
GS-719H	Type A	General rubber / Deep hole type (narrow hole)	JIS K 6253, ISO 7619 ASTM D 2240	550-8050mN （56.1-821.1gf）	Truncated Cone of φ 0.79 with 35° angle	φ12	140
GS-719L	Type A	General rubber / Deep hole type (narrow hole)	JIS K 6253, ISO 7619 ASTM D 2240, DIN 53 505	550-8050mN （56.1-821.1gf）	Truncated Cone of φ 0.79 with 35° angle	φ18	360
GS-720H	Type D	Hard rubber / Deep hole type (narrow hole)	JIS K 6253, ISO 7619 ASTM D 2240	0-44450mN （0-4533gf）	Conical Cone of Ｒ0.1 with 30° angle	φ12	140
GS-720L	Type D	Hard rubber / Deep hole type (narrow hole)	JIS K 6253, ISO 7619 ASTM D 2240, DIN 53 505	0-44450mN （0-4533gf）	Conical Cone of Ｒ0.1 with 30° angle	φ18	360