Lưu lượng kế Tek-Clamp 1200A | Tek-Clamp 1200A Ultrasonic Clamp On Flowmeter Tek-Trol

xuất xứ:

Italy

Hãng:

Tek-Trol

Giá bán:

LH-0914981967

Thành phần:

Mới 100% - Chính hãng

Mã sản phẩm:

TEK-CLAMP 1200A

Công Ty TNHH TM và DV Tăng Minh Phát là đại lý phân phối hãng Tek-trol tại Việt Nam

Data Sheet Tek-Clamp 1200A

Thông tin sản phẩm
Thông số kỹ thuật

Tek-Clamp 1200A Ultrasonic Clamp On Flowmeter Tek-Trol

1. Mô tả lưu lượng kế Tek-Clamp 1200A

Tek-Clamp 1200A Ultrasonic Clamp On Flowmeter is designed to measure the fluid velocity of liquid in a full or closed pipe. It is a measurement system which is both easy to install and use. The Tek-Clamp 1200A operates according to the difference in the Transit Time of Flight measured and determines the flow velocity by measuring the travel time of a pulse from one transducer to the next. Flow in the same direction takes less time to travel to the second transducer than flow in the opposite direction. Electroacoustic transducers receive and emit brief ultrasonic pulses through the liquid of the pipe. Transducers are vertically placed at both sides of the measured pipe. Sensors are placed on the pipe and fastened by means of a clamp. The display will quickly show the flow velocity. The Tek-Clamp 1200A can be used for metallic, plastic, and rubber tubes.

Lưu lượng kế Tek-Clamp 1200A | Tek-Clamp 1200A Ultrasonic Clamp On Flowmeter Tek-Trol

2. Đặc tính kỹ thuật Flowmeter Tek-Clamp 1200A

Model Number	Tek-Clamp 1200A-100F1	Tek-Clamp 1200A-100M	Tek-Clamp 1200A-100H
Accuracy	Better than 1% accuracy	Better than 1% accuracy	Better than 1% accuracy
LCD Display	2 × 20 LCD Display	2 × 20 English letters LCD display	4 × 16 LCD Display
Size	Pipe diameters from ½" to 28"	Pipe diameters from ½" to 28"	Pipe diameters from ½" to 28"
Protection Category	IP65	IP57	Clamp-on IP65 sensors
Output Signal	Modbus RS485, 4-20 mA, and Pulse	Modbus RS485, 4-20 mA, and Pulse	None
Power Supply	85-264 VAC or 24 VDC power supply	8-36 VDC	90-230 VAC power supply, Ni-MH battery operation for over 12 hours
Keypad	4 × 4 key tactile-feedback membrane keypad	4 key tactile-feedback membrane keypad	-

3. Thông số kỹ thuật lưu lượng kế Tek-Clamp 1200A

Service	Compatible Liquids
Wetted Material	Sensor: Aluminum alloy or Plastic alloy
Accuracy	Better than ±1%
Sensing Method	Clamp-on ultrasonic, differential transit time method in direct or reflect mode
Pipe Size Range	1200A-S2: ½” to 4″
Pipe Size Range	1200A-M2: 2″ to 28″
Display	1200A-100F1: 2″ H x 20″ W, 2 line x 20 characters
	1200A-100M: 2″ H x 20″ W, 2 line x 20 characters
	1200A-100H: 4″ H x 16″ W, 4 line x 16 characters
Power Requirements	1200A-100F1: 85 VAC to 264 VAC or 24 VDC
	1200A-100M: 8 VDC to 36 VDC
	1200A-100H: 90 VAC to 230 VAC or Ni-MH battery
Temperature Limits	32 °F to 320 °F
Outputs	1200A-100F1: Modbus RS485, 4-20 mA, and Pulse
	1200A-100M: Modbus RS485, 4-20 mA, and Pulse
	1200A-100H: None
Enclosure Rating	1200A-100F1: IP65
	1200A-100M: IP57
	1200A-100H: IP65

4. Model Chart Tek-Clamp 1200A Ultrasonic Clamp On Flowmeter

Model Number					Description
Note: Controller, Sensors, and Options are all ordered individually
Controllers
1200A-100F1					Wall Mount Ultrasonic Flowmeter
1200A-100M					Low Cost DIN Mount Flowmeter
1200A-100H					Hand Held Ultrasonic Flowmeter (with carrying case)
Transducers
1200A-S2					½" to 4" Pipe (Wall and DIN Controller)
1200A-M2					2" to 28" Pipe (Wall and DIN Controller)
1200A-S2H					½" to 4" Pipe (Hand Held)
1200A-M2H					2" to 28" Pipe (Hand Held)
1200A-HSH					½" to 4" Pipe, Bracket Mounted Sensors (Hand Held)
1200A-HMH					2" to 28" Pipe, Bracket Mounted Sensors (Hand Held)
Accessories
1200A-TM8812					Ultrasonic Thickness Gauge
1200A-SEYV75-2-5					Junction box and two 16’ Extension Cables
1200A-Gel					Coupling Gel