ROTATION SPEED TRANSMITTER KEY PHASOR

1. Mô tả bộ chuyển đổi rung Cemb TR-NC/8V

The TR-NC/8V transmitter measures the rotation speed of a shaft and it is able to interface directly in 2 wires technique (current loop 4 ÷ 20 mA) to an acquisition system (PLC or DCS).
The device is also able to work as Key Phasor if properly connected to the aquisition system (0÷10 V)

The measuring chain is composed by a proximity sensor, an extension cable and a transmitter.
It is supplied complete with:

• No. 4 contacts: two for the 24 Vdc connection of the power supply and two for the voltage gap for key phasor or probe positioning
• BNC socket for the connection to a portable analyser
• Coaxial connector for the sensor connection

Model: TR-NC/8

2. Thông số kỹ thuật transmitter TR-NC/8V

Composition	ST-NC/8 sensor in AISI 304 stainless steel
	CPT-NC/8 extension cable
	T-NC/8-API converter
Power supplies	-24 VDC nominal (-20 to -30 VDC range)
Connections	3-way screw terminal strip
	Miniature coaxial connector for sensor
Ambient operating range	Sensor: -35°C to +175°C
	Extension cable: -35°C to +175°C
	Converter: -35°C to +75°C
Measurement type	Differential
Measurement range	± 1 mm (0.5 - 2.5 mm)
Dynamic range	Frequency: 0 to 10,000 Hz
Output signal	Analogue
Linearity	± 1% over the entire measurement range
Nominal sensitivity	200 mV/mil (7.87 mV/μm)
Output impedance	500 Ohm

3. Kích thước TR-NC/8V Cemb transmitter

TR-NC/8/1/1/01/1        TR-NC/8/1/2/01/1        TR-NC/8/1/3/01/1
 

TR-NC/8/1/1/01/2        TR-NC/8/1/2/01/2        TR-NC/8/1/3/01/2

TR-NC/8/1/1/01/3        TR-NC/8/1/2/01/3        TR-NC/8/1/3/01/3

TR-NC/8/1/1/02/1        TR-NC/8/1/2/02/1        TR-NC/8/1/3/02/1

TR-NC/8/1/1/02/2        TR-NC/8/1/2/02/2        TR-NC/8/1/3/02/2

TR-NC/8/1/1/02/3        TR-NC/8/1/2/02/3        TR-NC/8/1/3/02/3

TR-NC/8/1/1/03/1        TR-NC/8/1/2/03/1        TR-NC/8/1/3/03/1

TR-NC/8/1/1/03/2        TR-NC/8/1/2/03/2        TR-NC/8/1/3/03/2

TR-NC/8/1/1/03/3        TR-NC/8/1/2/03/3        TR-NC/8/1/3/03/3

TR-NC/8/1/1/04/1        TR-NC/8/1/2/04/1        TR-NC/8/1/3/04/1

TR-NC/8/1/1/04/2        TR-NC/8/1/2/04/2        TR-NC/8/1/3/04/2

TR-NC/8/1/1/04/3        TR-NC/8/1/2/04/3        TR-NC/8/1/3/04/3

TR-NC/8/1/1/05/1        TR-NC/8/1/2/05/1        TR-NC/8/1/3/05/1

TR-NC/8/1/1/05/2        TR-NC/8/1/2/05/2        TR-NC/8/1/3/05/2

TR-NC/8/1/1/05/3        TR-NC/8/1/2/05/3        TR-NC/8/1/3/05/3

TR-NC/8/1/1/06/1        TR-NC/8/1/2/06/1        TR-NC/8/1/3/06/1

TR-NC/8/1/1/06/2        TR-NC/8/1/2/06/2        TR-NC/8/1/3/06/2

TR-NC/8/1/1/06/3        TR-NC/8/1/2/06/3        TR-NC/8/1/3/06/3

TR-NC/8/1/1/07/1        TR-NC/8/1/2/07/1        TR-NC/8/1/3/07/1

TR-NC/8/1/1/07/2        TR-NC/8/1/2/07/2        TR-NC/8/1/3/07/2

TR-NC/8/1/1/07/3        TR-NC/8/1/2/07/3        TR-NC/8/1/3/07/3

TR-NC/8/1/1/08/1        TR-NC/8/1/2/08/1        TR-NC/8/1/3/08/1

TR-NC/8/1/1/08/2        TR-NC/8/1/2/08/2        TR-NC/8/1/3/08/2

TR-NC/8/1/1/08/3        TR-NC/8/1/2/08/3        TR-NC/8/1/3/08/3

TR-NC/8/1/1/09/1        TR-NC/8/1/2/09/1        TR-NC/8/1/3/09/1

TR-NC/8/1/1/09/2        TR-NC/8/1/2/09/2        TR-NC/8/1/3/09/2

TR-NC/8/1/1/09/3        TR-NC/8/1/2/09/3        TR-NC/8/1/3/09/3

ĐẠI LÝ CEMB VIỆT NAM