Thông số kỹ thuật:

Long-term stability: ±0.25% of range/year maximum
Temperature drift: 0.03% of full scale per °C (0.06% for the K10 range)
Compensated temperature range for P10, K10 range is -20°C to 50°C
Display response time: 400 mS (2.5 Hz)
Transient filtering: Programmable time constants between 250 mS and 2 seconds in 2X increments
Diagnostics (IAW®): Open or shorted sensor; plugged port; power supply out of range; over and underrange conditions; microprocessor faults/failure; keypad short; switch fault
Control modes: Field-configuration for SRO switch action with programmable manual reset
Analog output: Compliant to NAMUR NE 43 4-20 mA output, 360 ohms max. at 24 VDC, Field
scalable, 2:1 turn down. Various faults are indicated at <3.6 mA. See installation
manual for details.
Analog output response time: 250 mS maximum with Filter set to OFF, pressure models only
Safety Relay Output Set point &
deadband:
User-configured, 100% adjustable over entire sensor operating range, deadband of 0
is undefined
Status Outputs: SRO Status - 30 VDC @ 20 mA Maximum
IAW Output - 30 VDC @ 20 mA Maximum
Switch response time: “Change-of-output” response ≤ 100 mS (for detection of full step change and change
of output state, Filter feature off)
Enclosure: Type 4X/IP66 certified polyester painted aluminum alloy 360, vented for ranges
P08-P14
Faceplate:
Cover:
UV-resistant pressure sensitive keypad and display overlay
Polyester painted aluminum with tempered glass insert
Conduit: 3/4” NPT female aluminum casting
Display: Backlit
• Local 4 digit x 0.5” LCD
• IAW® (I Am Working) status
• Process variable
• Units of measure
• Switch status
• Latch status
• Set point value
• Deadband value
• Min/Max values
• Fault codes
Memory: Programming and data protected by non-volatile EEPROM
Sensors: Gauge Pressure – 316L stainless steel, welded diaphragm, 1/2” NPT (female) process connection, micro-machined
piezo-resistive strain gauge silicon element, 0.25 ml silicone oil fill.
Maximum media temperature: -40 to 257°F (-40 to 125°C)
Differential Pressure - 316L stainless steel, welded diaphragms, 1/4” NPT (male) process connections, piezoresistive strain gauge silicon element, silicone oil fill.
Maximum media temperature: -40 to 257°F (-40 to 125°C)
Temperature – 316 stainless steel 0.25” OD sheath containing a 100 ohm 4-wire platinum RTD element available
with epoxy fill (local low temp) or powder fill (remote high temp).
Media temperature limits:
 -328 to 1000°F, intermittent to 1100°F (-200 to 538°C, int. to 593°C) for TH and TT ranges
 -40 to 500°F (-40 to 260°C) for TR and TL ranges
Vacuum: All pressure sensors withstand deep vacuum with no calibration effects. Two compound vacuum ranges are
available-P06 and P08 (see page 8).
EMI/RFI: Compliance to CE EMC requirements: EN 61000-6-2, EN 61000-6-4
Emission: EN 61000-6-4 Class A
Immunity: EN 61000-4-2 Immunity to Electrostatic Discharge
EN 61000-4-3 Immunity to Continuous Radiated Disturbances
EN 61000-4-4 Immunity to Electrical Fast Transients
EN 61000-4-5 Immunity to Surges
EN 61000-4-6 Immunity to Continuous Conducted Disturbances
EN 61000-4-11 Immunity to Voltage Dips and Interruptions
Weight: 4.5 - 6.0 lbs (2.0 - 2.7 kg)
Shock: per MIL-STD-810G method 516.6 – when device is subjected to 15 g (10 mSec) and 40 g (6 mSec); 3 drops/axis
Effects: less than +/- 0.40% of range
Vibration: per IEC 61298-3 (field and pipeline applications with high vibration level, 10-1000 Hz range, 0.014” displacement
peak amplitude, 5 g acceleration amplitude)
Effects: less than +/- 0.40% of range