Servoguide Mark-Ⅳ D-Series

PNEUMATIC-HYDRAULIC TYPE

1. Mô tả Servoguide Mark-Ⅳ D-Series

The Servoguide MK-IV is a new type of hydraulic controller which embodies our long experience and technology in the field of web control.

The Servoguide MK-IV.D is a pneumatic-hydraulic Edge Position Control(EPC) device. The edge sensors are pneumatic, which gives them an extremely simple structure, while the controller is a robust, yet highly responsive, hydraulic unit. Control is precise and maintenance is simple.

• Servoguide Mark-Ⅳ D053

Low load type
Model D053, priced lowest among the Servoguide series, is a controller for low loads.

• Servoguide Mark-Ⅳ D121 

Syngle type
Model D121 is the standard model of the Servoguide MK-IV series, which can be used for most machines.

• Servoguide Mark-Ⅳ D226

Twin type
Two Servoguide MK-IV controllers are mounted on one hydraulic pump unit in the model D226. Economical and compact instrumentation can be obtained when more than one EPC system(eg. laminator line, multi-stage guide roll, etc.) is installed nearby.

• Servoguide Mark-Ⅳ D721

High load-type
Model D721 is a high-power Servoguide which can be applied for high loads and high-speed lines.

2. Đặc tính Servoguide Mark-Ⅳ D-Series

• Compact and inexpensive.
• Excellent control accuracy (control within ±0.1mm according to installation conditions).
• No contact between sensor and web.
• Very easy installation and maintenance.
• Large operating force and high sensitivity and accuracy.
• All hydraulic devices are incorporated in the oil reservoir, thus eliminating oil leakage.
• Quiet operation due to the special construction that prevents noise emission
• (Operating noise level : below 65 dB (A)).
• Use of a long-Iife and easy-to-maintain non-contact rotary blower allows clean air to be supplied.
• Use of a general-purpose motor makes all models explosion proof and increases safety.

3. Thông số kỹ thuật Servoguide Mark-Ⅳ D-Series

NIRECO VIỆT NAM