VM600 RLC16 relay card Vibro-Meter Việt Nam

Relay card
FEATURES
» From the Vibro-Meter® product line
» Relay card with screw terminal strip
» 16 relays with change-over contacts
» Relay driver inverter logic (jumper selectable)
» Low contact resistance
» Low capacitance
» High through power
» Live insertion and removal of cards (hot-swappable)
» Conforms to EC standards for EMC

DESCRIPTION
The RLC16 relay card is designed for use in the VM600 series of machinery protection systems and condition and performance monitoring systems, from Meggitt Sensing Systems’ Vibro-Meter® product line. It is an optional card, for use when the four relays on the IOC4T input/output card are insufficient for the application and additional relays are required.
The RLC16 is installed in the rear of the VM600 (ABE04x) rack and connects directly to the rack backplane via a single connector.
The RLC16 contains 16 relays with change-over contacts. Each relay is associated with 3 terminals on a screw terminal strip accessible at the rear of the VM600 rack.
The relays are controlled by open-collector drivers under software control. Jumpers on the RLC16 card allow the selection of relay normally energized (NE) or normally de-energized (NDE)

SPECIFICATIONS

Relay characteristics
Relay names : RL1 to RL16
Type : PE014005
Contact arrangement : 1x COM, 1x NC and 1x NO contact/relay.
All relay contacts are available on J1, J2 and J3.
Nominal rated voltage : 250 VAC
Nominal rated current : 5 AAC
Maximum breaking capacity (without contact protection) : 1250 VA

Operate / release / bounce time : Typically 8 / 8 / 6 ms
Dielectric strength test voltages
• Between open contacts : 1000 VAC
• Between contact and coil : 4000 VAC
Mechanical life : 15 x 106 operations
Electrical life : >105 operations

Relay card characteristics
Presentation : 16 relay PCB
Relay state : Normally energized or normally de-energized (jumper selectable)
External connections : Screw terminal connectors (J1, J2 and J3)
Mounting : Installs in the rear of a VM600 rack and connects to the
rack’s backplane via a connector
Temperature range : See above relay characteristics
Humidity : ≤95% (RH non-condensing)
Power supply to RLC16
Supply voltage : +5 VDC
Consumption : 40 mA x16 (per relay)

Environmental
Operating
• Temperature : −25 to +65°C (−13 to +149°F)
• Humidity : 0 to 90% non-condensing
Storage
• Temperature : −40 to +85°C (−40 to +185°F)
• Humidity : 0 to 95% non-condensing
Vibrations and shock : See general VM600 rack specifications Physical
Height : 6U (262 mm, 10.3 in)
Width : 20 mm (0.8 in)
Depth : 125 mm (4.9 in)
Weight : 0.30 kg (0.66 lb)

Ordering number:

200-570-000-1Hh

200-570-000-2Hh