DS 400 Dew point monitoring CS-Instruments | DS 400 Bộ đo điểm sương trong hệ thống khí nén

Hãng:
CS Instruments
xuất xứ:
Germany
Giá bán:
LH-0914981967
Thành phần:
Code: 0601 4006
Mã sản phẩm:
DS 400

Công Ty TNHH TM và DV Tăng Minh Phát là đại Lý chính thức của hãng CS Instruments tại Việt Nam

Data Sheet DS 400

Hướng dẫn sử dụng DS 400

DS 400 Dew point monitoring

1. Giới thiệu DS 400 Dew point monitoring

For stationary dew point monitoring of refrigeration or adsorption dryers. The touch screen graphic display enables an intuitive operation and shows the progress of the measured values. 2 alarm relays are available for monitoring of threshold values. Available either with a classic analogue output 4...20 mA or optionally with digital interfaces like Ethernet and RS 485 (Modbus protocol). As a stand-alone solution the measured data stored in the optional data logger can be read-out via USB stick and evaluated by means of the software CS Soft Basic.

Bộ đo lưu lượng DS 400 CS Instruments

Xem chi tiết tại hãng

DS 400 Dew point monitoringCảm biến lưu lượng VA 50 và Máy ghi biểu đồ DS 400

Phụ kiện cho DS 400 (0601 4006)

Options for chart recorder DS 400: Order No
Integrated data logger for 100 million measured values Z500 4002
Integrated Ethernet and RS 485 interface Z500 4004
External Gateway PROFIBUS for RS 485 interface connection Z500 3008
External Gateway PROFINET for RS 485 interface connection Z500 3009
2 additional sensor inputs for analogue sensors (pressure sensors, temperature sensors etc.) Z500 4001
2 additional sensor inputs for digital sensors (SDI/Modbus) Z500 4003
Integrated webserver Z500 4005
Option “mathematics calculat. function” for 4 freely selectable “virtual” channels Z500 4007
Option "Totalizer function for analogue signals" Z500 4006

Technical data DS 400

Dimensions of housing 118 x 115 x 98 mm
Connections 5 x PG12 for sensors and supply, alarm relay
1 x RJ 45 Ethernet connection
Version panel mounting Cut-out panel 92 x 92 x 75 mm
Weight 545 g
Material Plastic , Front foil Polyester
Protection level IP44
Sensor inputs 4 (2x2) sensor inputs for analogue and digital sensors freely allocable.
Digital CS sensors for dew point and consumption with SDI interface
FA/VA 400 Series.
Digital third-party sensors RS 485/Modbus RTU, other bus systems realizable on request.
Analogue CS sensors for pressure, temperature, clamp-on ammeters preconfigured.
Analogue third-party sensors 0/4 20 mA, 0 - 1/10/30 V, pulse, Pt100/Pt1000, KTY.
Power supply for sensors Output voltage:: 24 VDC ± 10%
Output current: a.) Digital-Board 120mA continuous operation / channel b.) Analog-Board 120mA continuous operation for both
channels
Maximum output current over all channels: 280mA
Interfaces USB stick USB 2.0),
Ethernet TCP
RS 485 Modbus RTU,
SDI (Serial data Interface)
other bus systems on request, web server optional
Outputs Outputs 2 relay (max. switching voltage: 230 VAC / 30 VDC, Switching current: min. 10mA, max. 3A) alarm management,
Relay freely programmable, collective alarm.
Analogue output, pulse in case of sensors with own signal output looped, like e.g. VA/FA Series.
Power supply 100 240 VAC/50 60 Hz, max.power input: 23VA, special version 24 VDC
Battery 1) CR 2032
Colour screen 3.5“-Touchpanel TFT transmissive, graphics, curves, statistics
Accuracy See sensor specifications
Operating temperature 0 – 50 °C
Storage temperature -20 bis +70°C
Data Logger
Memory size 4 GB SD memory card (micro
SD class4)
Optional
Ethernet- and RS 485 Interface
(Modbus Protocol)
Optional
Webserver Optional
Galv. Isolated Impulse output (2x) Optional

Input signal

Input signal
Current signal
(0 20 mA / 4 20 mA) internal or external power supply
Measuring range 0 – 20 mA / 4 – 20 mA
Resolution 0,0001 mA
Accuracy ± 0,03 mA ± 0,05 %
Input resistance 50
Voltage signal
(0 - 1V)
Measuring range 0 - 1 V
Resolution 0,05 mV
Accuracy ± 0,2 mV ± 0,05 %
Input resistance 100 k
Voltage signal
(0 - 10 V / 30 V)
Measuring range 0 - 10 V/30 V
Resolution 0,5 mV
Accuracy ±  2 mV ±  0,05 %
Input resistance 1 M
RTD Pt100 Measuring range -200 - 850 °C
Resolution 0,1 °C
Accuracy ± 0,2 °C at -100 - 400 °C
± 0,3 °C (further range)
RTD Pt1000 Measuring range -200 - 850 °C
Resolution 0,1 °C
Accuracy ± 0,2 °C at -100 - 400 °C
± 0,3 °C ( further range )
Pulse Measuring range minimal pulse length 100 μs frequency 0 - 1 kHz
max. 30 VDC

0601 0510

0601 0512

Bình luận của bạn
*
*
*
*
 Captcha
Chia sẻ:
Thống kê truy cập
  • Trực tuyến:
    8
  • Hôm nay:
    1350
  • Tuần này:
    2484
  • Tuần trước:
    11730
  • Tháng trước:
    13080
  • Tất cả:
    2829232
Video Clip
Liên kết website

CÔNG TY TNHH TM VÀ DV TĂNG MINH PHÁT

  • Địa chỉ: Số 1, Đường số 27, phường Hiệp Bình Chánh, Quận Thủ Đức, Tp.HCM.

  • Hotline: 0917.000.655 (Mr.Hue)

  • Email: hue@tmpvietnam.com

  • Zalo: 0917.000.655

  • Website: cuahangtudonghoa.com

MẠNG XÃ HỘI :  Thông tin cuối website Thông tin cuối website Thông tin cuối website Thông tin cuối website

© 2018 Tang Minh Phat , all rights reserved