Đồng hồ đo lưu lượng FT1 Fox Thermal | Flow Meter FT1 Series Fox Thermal

Hãng:

Fox Thermal

xuất xứ:

USA

Giá bán:

LH-0914981967

Thành phần:

Mới 100% - Chính hãng

Mã sản phẩm:

FT1 Series

Đại Lý Phân Phối Fox Thermal tại Việt Nam

Thông tin sản phẩm
Thông số kỹ thuật

Đồng hồ đo lưu lượng FT1 Fox Thermal

1. Mô tả đồng hồ đo lưu lượng FT1 Fox Thermal

The Model FT1 is a multiple award winner due to its innovative design elements such as the DDC-Sensor™ technology platform that allows it to operate using the Gas-SelectX® gas menu selection tool.

2. Tính năng đặc điểm đồng hồ đo lưu lượng FT1 Fox Thermal

Insertion & Inline Styles
DDC-Sensor™ Technology
Gas-SelectX® Gas Selection Menu
Zero CAL-CHECK® Calibration Validation
Scroll down for more features/benefits!

Đồng hồ đo lưu lượng FT1 Fox Thermal | Flow Meter FT1 Series Fox Thermal

3. Thông số kỹ thuật đồng hồ đo lưu lượng FT1 Fox Thermal

Technical Specifications
Fox Thermal Model FT1 Thermal Mass Flow Meter & Temperature Transmitter
Performance Specs
Type	Insertion	Inline
Flow Accuracy:	Air: ± 1% of reading ± 0.2% of full scale. Other Gases: ± 1.5% of reading ± 0.5% of full scale. Accuracy specification applies to customer's selected flow range
Straight, unobstructed pipe requirement:	15 diameters upstream; 10 downstream.	8 diameters upstream; 4 downstream.
Flow Repeatability:	± 0.2% of full scale
Flow Response Time:	0.8 seconds (one time constant)
Temperature Accuracy:	± 1° F (± 0.6° C)
Calibration:	Factory Calibration to NIST-traceable standards Zero CAL-CHECK®: In situ, operator-initiated calibration validation
Operating Specs
Type	Insertion	Inline
Flow Units	SCFM, SCFH, NMPS, NM3/M, NM3/H, NM3/D, NLPS, NLPM, NLPH, MCFD, MSCFD, SCFD, MMSCFD, MMSCFM, SM3/M, SM3/D, SM3/H, LB/S, LB/M, LB/H, LB/D, Kg/S, Kg/M, Kg/Hr, SLPM, SFPM, MT/H
Flow Rates:	15 to 25,000 SFPM (0.07 to 120 NMPS)
Turndown:	up to 1000:1; 100:1 typical
Relative Humidity:	90% RH maximum; non-condensing
Temperature:	DDC-Sensor™: -40 to 250°F (-40 to 121°C) Enclosure: -40 to 158°F (-40 to 70°C) *Note: Display dims below -4°F (-20°C); function returns once temperature rises again.
Inputs/Outputs	All outputs and communication circuits are galvanically isolated. Standard 4-20mA output proportional to the flow rate; fault indication per NAMUR NE43; HART communication option. Second output for pulse, Modbus RTU (RS485), or BACnet MS/TP (RS485). Isolated pulse output: 5 to 24VDC, 10mA max, 0 to 100Hz for flow. The pulse output can be used as an isolated sold state output for alarms.
Port:	Mini USB communication port is standard.
Software:	The free PC-based software tool - FT1 View™ - provides complete configuration, remote process monitoring, and data logging functions.
Optional serial communication:	Modbus RTU (RS485), BACnet MS/TP (RS485) or HART (when no pulse output has been ordered).
4-20mA and Pulse Verification:	Simulation mode used to align 4-20mA output and pulse output (if ordered) with the input to customer’s PLC/DCS.