Flow Meter FT2A Fox Thermal | Đồng hồ đo lưu lượng FT2A Fox Thermal
Đại Lý Phân Phối Fox Thermal tại Việt Nam
The Model FT2A has a large selection of communication protocol options available intrinsically (without any other equipment). Options include: BACnet MS/TP, RS485 Modbus RTU, Profibus-DP, DeviceNet, or Ethernet Modbus TCP.
Flow Meter FT2A Fox Thermal
1. Chức năng chính của đồng hồ đo lưu lượng FT2A Fox Thermal
Measures process gas flow rate/total and temperature- Standard USB port, optional BACnet MS/TP (RS485), Modbus RTU (RS485), Profibus-DP, DeviceNet, or Ethernet Modbus TCP
- Standard on-board display and configuration panel
- Equipped with the Power Pro™ thermal mass flow sensor
- One discrete output is programmable for either pulse (for totalizing flow) or alarms
- One discrete input to reset total or select a different calibration on 2 gas curves
- 4-20mA output proportional to mass flow rate
- FM and FMc approved for Class I, II, III, Div 2, Groups A, B, C, D, E, F, G, T4 hazardous locations; NEMA 4X approved; Remote NEMA 4X electronics enclosure with explosion proof sensor j-box.
- CE Approved
- NIST traceable calibration
- Wide measurement range
- 1% R + 0.2% FS flow accuracy
- 24 VDC or optional 100 to 240VAC in local or remote enclosures
CODE
FT2A-06IE-SS-ST-E1-B0-G1 FT2A-09I-SS-ST-E2-MB-G2 FT2A-12I-SS-ST-E3-BN-G3
FT2A-15I-SS-ST-E4-BD-G4 FT2A-18I-SS-ST-E1-BP-G5 FT2A-24I-SS-ST-E2-BE-G6
FT2A-30I-SS-ST-E3-B0-G7 FT2A-36I-SS-ST-E4-B0-G1 FT2A-15R-SS-ST-E1-B0-G2
FT2A-18R-SS-ST-E2-B0-G3 FT2A-24R-SS-ST-E3-B0-G4 FT2A-30R-SS-ST-E4-B0-G5
FT2A-36R-SS-ST-E1-B0-G6 FT2A-R1-SS-ST-E2-B0-G6 FT2A-R2-SS-ST-E3-B0-G7
FT2A-R3-SS-ST-E4-B0-G1 FT2A-06IE-SH-ST-E1-B0-G2 FT2A-09I-SH-T-E2-B0-G3
FT2A-12I-SH-ST-E3-B0-G4 FT2A-15I-SSH-ST-E4-B0-G5 FT2A-18I-SH-ST-E1-B0-G6
FT2A-24I-SH-ST-E2-B0-G7 FT2A-30I-SH-ST-E3-B0-G1 FT2A-36I-SH-ST-E4-B0-G2
FT2A-15R-SH-ST-E1-B0-G3 FT2A-18R-SH-ST-E2-B0-G4 FT2A-24R-SH-ST-E3-B0-G5
FT2A-30R-SH-ST-E4-B0-G6 FT2A-36R-SH-ST-E1-B0-G7 FT2A-R1-SH-ST-E2-B0-G1
FT2A-R2-SH-ST-E3-B0-G2 FT2A-R3-SH-ST-E4-B0-G3 FT2A-06IE-SJ-ST-E1-B0-G4
FT2A-09I-SJ-ST-E2-B0-G5 FT2A-12I-SJ-ST-E3-B0-G6 FT2A-15I-SJ-ST-E4-B0-G7
FT2A-18I-SJ-ST-E1-B0-G1 FT2A-24I-SJ-ST-E2-B0-G2 FT2A-30I-SJ-ST-E3-B0-G3
FT2A-36I-SJ-ST-E4-B0-G4 FT2A-15R-SJ-ST-E1-B0-G5 FT2A-18R-SJ-ST-E2-B0-G6
FT2A-24R-SJ-ST-E3-B0-G7 FT2A-30R-SJ-ST-E4-B0-G1 FT2A-36R-SJ-ST-E1-B0-G2
FT2A-R1-SJ-ST-E2-B0-G3 FT2A-R2-SJ-ST-E3-B0-G1 FT2A-R3-SJ-ST-E-B0-G1
FT2A-06IE-SL-ST-E1-B0-G1 FT2A-09I-SL-ST-E2-B0-G1 FT2A-12I-SL-ST-E3-B0-G1
FT2A-15I-SL-ST-E4-B0-G1 FT2A-18I-SL-ST-E1-B0-G1 FT2A-24I-SL-ST-E2-B0-G1
FT2A-30I-SL-ST-E3-B0-G1 FT2A-36I-SL-ST-E4-B0-G1 FT2A-15R-SL-ST-E1-B0-G1
FT2A-18R-SL-ST-E2-B0-G1 FT2A-24R-SL-ST-E3-B0-G1 FT2A-30R-SL-ST-E4-B0-G1
FT2A-36R-SL-ST-E1-B0-G1 FT2A-R1-SL-ST-E2-B0-G1 FT2A-R2-SL-ST-E3-B0-G1
FT2A-R3-SL-ST-E4-B0-G1 FT2A-06IE-SS-HT-E1-B0-G1 FT2A-09I-SS-HT-E2-B0-G1
FT2A-12I-SS-HT-E3-B0-G1 FT2A-15I-SS-HT-E4-B0-G1 FT2A-18I-SS-HT-E1-B0-G1
FT2A-24I-SS-HT-E2-B0-G1 FT2A-30I-SS-HT-E3-B0-G1 FT2A-36I-SS-HT-E4-B0-G1
FT2A-15R-SS-HT-E1-B0-G1 FT2A-18R-SS-HT-E2-B0-G1 FT2A-24R-SS-HT-E3-B0-G1
FT2A-30R-SS-HT-E4-B0-G1 FT2A-36R-SS-HT-E1-B0-G1 FT2A-R1-SS-HT-E2-B0-G1
FT2A-R2-SS-HT-E3-B0-G1 FT2A-R3-SS-HT-E4-B0-G1 FT2A-06IE-SH-HT-E1-B0-G1
FT2A-09I-SH-HT-E2-B0-G1 FT2A-12I-SH-HT-E1-B0-G1
FT2A-15I-SSH-HT-E2-B0-G1
FT2A-18I-SH-HT-E3-B0-G1
FT2A-24I-SH-HT-E4-B0-G1
FT2A-30I-SH-HT-E1-B0-G1
FT2A-36I-SH-HT-E2-B0-G1
FT2A-15R-SH-HT-E3-B0-G1
FT2A-18R-SH-HT-E4-B0-G1
FT2A-24R-SH-HT-E1-B0-G1
FT2A-30R-SH-HT-E2-B0-G1
FT2A-36R-SH-HT-E3-B0-G1
FT2A-R1-SH-HT-E4-B0-G1
FT2A-R2-SH-HT-E1-B0-G1
FT2A-R3-SH-HT-E2-B0-G1
FT2A-06IE-SJ-HT-E3-B0-G1
FT2A-09I-SJ-HT-E4-B0-G1
FT2A-12I-SJ-HT-E1-B0-G1
FT2A-15I-SJ-HT-E2-B0-G1
FT2A-18I-SJ-HT-E3-B0-G1
FT2A-24I-SJ-HT-E4-B0-G1
FT2A-30I-SJ-HT-E1-B0-G1
FT2A-36I-SJ-HT-E2-B0-G1
FT2A-15R-SJ-HT-E3-B0-G1
FT2A-18R-SJ-HT-E4-B0-G1
FT2A-24R-SJ-HT-E1-B0-G1
FT2A-30R-SJ-HT-E2-B0-G1
FT2A-36R-SJ-HT-E3-B0-G1
FT2A-R1-SJ-HT-E4-B0-G1
FT2A-R2-SJ-HT-E1-B0-G1
FT2A-R3-SJ-HT-E2-B0-G1
FT2A-06IE-SL-HT-E3-B0-G1
FT2A-09I-SL-HT-E4-B0-G1
FT2A-12I-SL-HT-E1-B0-G1
FT2A-15I-SL-HT-E2-B0-G1
FT2A-18I-SL-HT-E3-B0-G1
FT2A-24I-SL-HT-E4-B0-G1
FT2A-30I-SL-HT-E1-B0-G1
FT2A-36I-SL-HT-E2-B0-G1
FT2A-15R-SL-HT-E3-B0-G1
FT2A-18R-SL-HT-E4-B0-G1
FT2A-24R-SL-HT-E1-B0-G1
FT2A-30R-SL-HT-E2-B0-G1
FT2A-36R-SL-HT-E3-B0-G1
FT2A-R1-SL-HT-E4-B0-G1
FT2A-R2-SL-HT-E1-B0-G1
FT2A-R3-SL-HT-E2-B0-G1
Thông số đồng hồ đo lưu lượng FT2A Fox Thermal
| Technical Specifications | ||||||
| Fox Thermal Model FT2A Thermal Mass Flow Meter & Temperature Transmitter | ||||||
| Performance Specs | ||||||
| Type | Insertion | Inline | ||||
| Flow Accuracy: | ± 1% of reading ± 0.2% of full scale. | ± 1% of reading ± 0.2% of full scale. | ||||
| 15 diameters of straight, unobstructed pipe upstream and 10 downstream. | 8 diameters of straight, unobstructed pipe upstream and 4 downstream. | |||||
| Flow Repeatability: | ± 0.2% of full scale | |||||
| Flow Response Time: | 0.9 seconds (one time constant) | |||||
| Temperature Accuracy: | ± 1.8°F (± 1.0°C) -40 to 250°F (-40 to 121°C); ± 3.6°F (± 2.0°C), 250 to 650°F (121 to 343°C); 60 SFPM minimum. | |||||
| Calibration: | Factory Calibration to NIST-traceable standards | |||||
| Operating Specs | ||||||
| Type | Insertion | Inline | ||||
| Flow Units (field selectable): | SCFM, SCFH, NMPS, NM3/M, NM3/H, NM3/D, NLPS, NLPM, NLPH, MCFD, MSCFD, SCFD, MMSCFD, MMSCFM, SMPS, SM3/H, LB/S, LB/M, LB/H, LB/D, KG/S, KG/M, KG/H, SLPM, SFPM, MT/H, SM3/M | |||||
| Flow Rates: | 15 to 60,000 SFPM (0.07 to 280 NMPS) - Air at 70°F (20°C) & 1 ATM | |||||
| Turndown: | up to 1000:1; 100:1 typical | |||||
| Flow Ranges: | Pipe Size | SCFM | NM³/Hr | Pipe Size | SCFM | NM³/Hr |
| 1.5" (40mm) | 0 - 840 | 0 - 1,325 | 0.25" | 0 - 7.5 | 0 - 11.8 | |
| 2" (50mm) | 0 - 1,400 | 0 - 2,210 | 0.5" | 0 - 125 | 0 - 200 | |
| 2.5" (63mm) | 0 - 2,000 | 0 - 3,150 | 0.75" | 0 - 220 | 0 - 350 | |
| 3" (80mm) | 0 - 3,100 | 0 - 4,890 | 1" | 0 - 360 | 0 - 570 | |
| 4" (100mm) | 0 - 5,300 | 0 - 8,360 | 1.25" | 0 - 625 | 0 - 990 | |
| 6" (150mm) | 0 - 12,000 | 0 - 18,930 | 1.5" | 0 - 840 | 0 - 1,325 | |
| 8" (200mm) | 0 - 20,840 | 0 - 32,870 | 2" | 0 - 1,400 | 0 - 2,210 | |
| 10" (250mm) | 0 - 32,800 | 0 - 51,740 | 2.5" | 0 - 2,000 | 0 - 3,150 | |
| 12" (300mm) | 0 - 46,600 | 0 - 73,500 | 3" | 0 - 3,100 | 0 - 4,890 | |
| 4" | 0 - 5,300 | 0 - 8,360 | ||||
| 6" | 0 - 12,000 | 0 - 18,930 | ||||
| Note: Standard conditions of air at 70°F and one atmosphere. | ||||||
| Consult factory for other gases, pipe sizes, and flow ranges other than those listed. | ||||||
| Gas Pressure (max): | 500 psig (34.5 barg) | 316 SS inline w/NPT ends: 300 psig (20 barg) | ||||
| 316 SS inline w/150lb flanges: 230 psig (16 barg) | ||||||
| CS inline w/NPT ends: 300 psig (20 barg) | ||||||
| CS inline w/150lb flanges: 285 psig (20 barg) | ||||||
| Check with factory for higher pressure options. | ||||||
| Note: Pressure ratings stated for temperature of 100°F (38°C). | ||||||
| Relative Humidity: | 90% RH maximum; non-condensing | |||||
| Temperature by Sensor Type: | ST Sensor: -40 to 250°F (-40 to 121°C) | |||||
| HT Sensor: -40 to 650°F (-40 to 343°C) | ||||||
| Temperature by Enclosure: | DC Power: -40 to 158°F (-40 to 70°C) | |||||
| AC Power: -4 to 158°F (-20 to 70°C) | ||||||
| Inputs Power (Power Consumption): | Input Power (without the Anybus serial communication option): 24VDC, (±10%), 0.4 Amps (standard DC Power) 100 to 240VAC ~(+10%-15%), 50-60Hz, 0.2 Amps (with AC power option). | |||||
| Input Power (with Anybus serial communication option): 24VDC, (±10%), 0.7 Amps (standard DC Power) 100 to 240VAC ~(+10%-15%), 50-60Hz, 0.2 Amps (with AC power option). | ||||||
|
Note: Fluctuations of AC and DC power supply are not to exceed ±10% of rating.
|
||||||
| Outputs: | Two isolated 4-20mA outputs (one for flow rate & a second is programmable for flow rate or temperature); fault indication per NAMUR NE43. | |||||
| Isolated pulse output 0 to 100Hz, 5 to 24 volts p/p for flow (the pulse output can be used as an isolated solid state output for alarms); 10mA max. | ||||||
| USB connector for connecting to a laptop or computer is standard; free PC-based software tool - FT2A View™ - provides complete configuration, remote process monitoring and data logging functions. | ||||||
| Optional isolated communication outputs: RS485-Modbus, BACnet MS/TP, Profibus-DP, DeviceNet or Ethernet Modbus TCP. | ||||||
| Port: | Mini USB communication port is standard. | |||||
| Software: | The free PC-based software tool - FT2A View™ - provides complete configuration, remote process monitoring, and data logging functions. | |||||
| Optional serial communication: | Modbus RTU (RS485), BACnet MS/TP (RS485), Profibus-DP, DeviceNet or Ethernet Modbus TCP. | |||||
| 4-20mA Loop Verification: | Simulation mode used to align 4-20mA output with the input to customer’s PLC/DCS. | |||||
| Physical Specs | ||||||
| Type | Insertion | Inline | ||||
| Sensor Material: | 316 stainless steel standard. Hastelloy C276 optional. | |||||
| Enclosure: | FM (U.S.) & FMc (Canadian) approved for Class I, II, III, Division 2, Groups A, B, C, D, E, F, G, T4A hazardous locations. NEMA 4X and CE approved. Options: Remote NEMA 4X electronics enclosure with explosion-proof sensor j-box. | |||||
| Cabling to remote enclosure: | 5-conductor, 18 AWG, twisted, shielded, 100 feet maximum. | |||||
| Retractor Assemblies: | Packing gland assembly: 125 psig (8.6 barg ) max. High pressure (crank) retractor: NPT 600 psig (41.4 barg), ANSI 150 flange & ANSI 300 flange, no valve supplied. | |||||
| Installation: | Fox Thermal-supplied compression fitting connects to customer-supplied ¾" female coupling welded to pipe. | Compression fitting included with flow body | ||||
- 4Matic Valves
- AuCom
- ADVEL
- Aichi Tokei Denki
- Autrol
- AEG
- BEKO TECHNOLOGIES
- BOURNS
- BRUEL & KJAER VIBRO
- Badotherm
- Brooks Instrument
- CHECKLINE
- CS Instruments
- CEIA
- COMET
- CEMB
- DAIICHI ELECTRONICS
- EUROSWITCH
- Econex
- Flownics
- Fox Thermal
- Fotoelektrik Pauly GmbH
- Fireye
- GASTRON
- GINICE
- HBM
- IBA
- IWATSU
- INSERT DEAL
- INDRA
- IPF ELECTRONIC
- IMI NORGREN
- KOGANEI
- KIEPE ELEKTRIK
- KOMETER
- LEINE LINDE
- Lika
- Lapar Valve
- Matsushima
- MTS Sensor
- METRIX
- MARK-10
- MAGNETEK
- MonTech
- mit-UNID-cns
- Maxcess
- MOOG
- NIRECO
- Ohkura
- Puls Power
- PHISHER
- PORA
- PFEIFFER VACUUM
- Pietro Fiorentini
- RIELS
- Rotork
- Redlion
- SUNTES
- SAUTER
- Schenck process
- SensorsONE
- STI
- SENSOREX
- TECLOCK
- TE.MA.VASCONI
- TEMPSENS
- TECH-LAB-SYSTEMS
- Tatronic
- Tek-trol
- Thwing-Albert
- United electric control
- Vibro-Meter®
- von Rohr Armaturen AG
- VEGA
- Vemmtec
- Wilcoxon
- Weintek
- Balluff
- ME SYSTEMSE
- Thiết bị đo lưu lượng
- Thiết bị đo mức
- Thiết bị phát hiện rò rỉ khí
- Thiết bị và hệ thống đo trọng lượng
- Thiết bị phát hiện rò rỉ khí nén
- Thiết bị dùng trong hệ thống điều khiển và tự động hóa
- Flow Technology
- AT2E
- TAY TRANG SPOHN BURKHARDT
- Okazaki
- TWK
- Woma
- MET ONE
- EPI FLOW METER
-
Trực tuyến:24
-
Hôm nay:3820
-
Tuần này:10056
-
Tuần trước:26400
-
Tháng trước:34172
-
Tất cả:3265959
